一种简便的溶胶-凝胶法制备的La0.67Ca0.33MnO3纳米晶粉末的结构与性能（英文）

采用一种比较简单的溶胶-凝胶法在相对较低的温度下制备了钙钛矿锰氧化物La0.67Ca0.33MnO3纳米粉末。XRD结果显示干凝胶直接在500℃下煅烧即可得到单一钙钛矿相,而无需任何其他中间步骤。当煅烧温度从500℃上升到900℃时,纳米晶的尺寸相应的从30纳米长大到80纳米左右。分别采用扫描电镜和传统的四探针法表征了多晶靶材的表面形貌和电输运性能,观察到了电阻率-温度(ρ-T)曲线上绝缘体-金属转变温度TIM附近(270 K左右)非常陡的电阻率变化。     

局部对称的黎曼流形中的极小子流形

主要研究了局部对称的黎曼流形中的定向紧致无边极小子流形的内蕴刚性问题,利用一个矩阵不等式,得到了这类子流形的一个刚性定理．所得结果部分改进了已有的一个结论．     

复合系统双荷子解的存在性

用不定变分法研究了由Georgi-Glashow(GG)模型和SO(3)规范Skyrme模型所构成的复合(简记为GGS)模型,证明了其既带电荷又带磁荷的类粒子稳态解——双荷子解的存在性.该解是依赖于两个物理参数的径向对称解.最后,给出了解在无穷远处的渐近估计.     

Proposal of switchable multiwavelength laser with continuously tunable spacing in MgO： APPLN waveguide

A switchable multiwavelength laser with a continuously tunable spacing is proposed and illustrated based on cascaded interactions of the second harmonic and difference-frequency generations in an aperiodically poled MgO-doped lithium niobate (MgO:APPLN) waveguide. The wavelengths and wavelength spacings of the four outputs are continuously varied and controlled by changing the two input pump wavelengths and spacings within a 3-nm flattop bandwidth of MgO:APPLN. In addition, the switchable states of the four outputs can be selected by inputting proper powers of the two pumps. The number of output wavelengths can also be increased by choosing the proper APPLN structure, the total length of MgO:APPLN, and higher powers of input pump lights.     

Proposal for simultaneous all-optical AND, NOR, and XNOR logic gates using QPM cascading nonlinear effects in two PPLNs

We propose AND,NOR,and XNOR logic gates realized simultaneously for 40-Gb/s networks,in which the realization of NOR and XNOR logic gates using only MgO-doped periodically poled lithium niobate(MgO:PPLN) is reported.In our configuration,we exploit broadband quasi-phase matching(QPM) cascaded second harmonic and difference-frequency generation(cSHG/DFG),cascaded sum-frequency and differencefrequency generation(cSFG/DFG) in one MgO:PPLN,and the narrow band QPM sum-frequency generation(SFG) in another MgO:PPLN.The performance,including the quality-factor(Q-factor) and extinction ratio(ER),of the proposed multifunctional logic device is also simulated.     

Improving attosecond pulse reflection by large angle incidence for a periodic multilayer mirror in the extreme ultraviolet region

The improvement of attosecond pulse reflection by large angle incidence for a periodic multilayer mirror in the extreme ultraviolet region has been discussed. Numerical simulations of both spectral and temporal reflection characteristics of periodic multilayer mirrors under various incident angles have been analyzed and compared. It was found that the periodic multilayer mirror under a larger incidence angle can provide not only higher integrated reflectivity but also a broader reflection band with negligible dispersion, making it possible to obtain better a reflected pulse that has a higher pulse reflection efficiency and shorter pulse duration for attosecond pulse reflection. In addition, by increasing the incident angle, the promotion of attosecond pulse reflection capability has been proven for periodic multilayer mirrors with arbitrary layers.     

The supply voltage scaled dependency of the recovery of single event upset in advanced complementary metal-oxide-semiconductor static random-access memory cells

Using computer-aided design three-dimensional simulation technology,the supply voltage scaled dependency of the recovery of single event upset and charge collection in static random-access memory cells are investigated.It reveals that the recovery linear energy transfer threshold decreases with the supply voltage reducing,which is quite attractive for dynamic voltage scaling and subthreshold circuit radiation-hardened design.Additionally,the effect of supply voltage on charge collection is also investigated.It is concluded that the supply voltage mainly affects the bipolar gain of the parasitical bipolar junction transistor(BJT) and the existence of the source plays an important role in supply voltage variation.     

Thermal modeling optimization and experimental validation for a single, concentrator solar cell system with a heat sink

A single concentrator solar cell model with a heat sink is established to simulate the thermal performance of the system by varying the number, height, and thickness of fins, the base thickness and thermal resistance of the thermal conductive adhesive. Influence disciplines of those parameters on temperatures of the solar cell and heat sink are obtained. With optimized number, height and thickness of fins, and the thickness values of base of 8, 1.4 cm, 1.5 mm, and 2 mm, the lowest temperatures of the solar cell and heat sink are 41.7℃ and 36.3℃ respectively. A concentrator solar cell prototype with a heat sink fabricated based on the simulation optimized structure is built. Outdoor temperatures of the prototype are tested. Temperatures of the solar cell and heat sink are stabilized with time continuing at about 37℃-38℃ and 35℃-36℃ respectively, slightly lower than the simulation results because of effects of the wind and cloud. Thus the simulation model enables to predict the thermal performance of the system, and the simulation results can be a reference for designing heat sinks in the field of single concentrator solar cells.     

Three different low-temperature plasma-based methods for hydrophilicity improvement of polyethylene films at atmospheric pressure

Three different low-temperature plasma-based methods were used to improve the surface hydrophilicity of polyethy- lene （PE） films, and all the modification processes were carried out by employing an atmospheric pressure plasma jet （APPJ） system. （a） PE films were directly modified by APPJ using a gas mixture of He and 02. （b） Acrylic acid （AA） was introduced into the system and a polymer acrylic acid （PAA） coating was deposited onto the PE films. （c） AA was grafted onto the PE surface activated by plasma pre-treatment. It was found that the hydrophilicity of the PE films was significantly improved for all the three methods. However, the samples modified by Process （a） showed hydrophobicity recovery after a storage time of 20 days while no significant change was found in samples modified by Process （b） and Process （c）. The Fourier transform infrared spectroscopy （FTIR） results indicated that the most intensive C=O peak was detected on the PE surface modified by Process （c）. According to the X-ray photoelectron spectroscopy （XPS） analysis, the ratios of oxygen-containing polar groups for samples modified by Process （b） and Process （c） were higher than that modified by Process （a）.     

TiO2/CNTs复合材料涂覆隔膜的制备及在锂硫电池中的应用

以金属有机框架材料MIL-125(Ti)为模板制备了多孔TiO₂, 同时引入碳纳米管, 得到碳纳米管交联包覆多孔TiO₂的三维导电复合材料. 将该复合材料涂覆在隔膜表面并应用于锂硫电池. 利用透射电子显微镜(TEM)、 扫描电子显微镜(SEM)和X射线光电子能谱仪(XPS)等对材料的结构和组成进行了表征. 电化学测试结果表明,在0.5C(1C=1675 mA/g)倍率下, CNTs/S复合正极材料表现出高达1051.1 mA·h/g的放电容量, 循环150周后仍可保持在904.8 mA·h/g. 在1C倍率下, 放电容量最高可达1036.9 mA·h/g, 循环250周后仍有763.0 mA·h/g, 展现出了良好的倍率性能和循环稳定性.