光辐照对单根In掺杂ZnO纳米线电学性质的影响

通过化学气相沉积方法成功制备了高质量的In掺杂ZnO纳米线.选用325 nm的He-Cd激光器做为光源,进一步探究了单根In掺杂ZnO纳米线的光响应特性.结果表明:紫外光辐照可使金属电极与纳米线之间的有效肖特基接触势垒下降,使接触类型由肖特基接触转变到欧姆接触;撤去紫外光后,电极与纳米线之间的接触可以恢复到未光照时的肖特基接触.讨论了肖特基接触与欧姆接触之间转变的物理机制.     

气泡弹性对同心筒水下发射影响研究

潜射导弹自同心简装置发射过程中在筒口处会形成燃气泡,由于气泡在水下的弹性效应,水气耦合作用导致气泡周期性地膨胀压缩,会对导弹弹道参数、受载特性产生一定影响.以CFD为技术手段,建立了导弹水下发射动态仿真模型,通过数值模拟获得了发射过程中多相流场、导弹弹道参数及受力的时间历程曲线,分析了气体弹性效应对参数变化的影响;并针对发射深度及其发射艇速对气泡弹性效应的影响进行了仿真分析,给出了其影响规律.仿真方法和结果对工程研究有一定参考价值.     

微型光谱分析系统检测食品添加剂山梨酸的研究

基于对微型光谱仪的二次深度研发,构建了新型食品安全检测微型光谱分析系统,并采用标准加入法,对牛肉粒中的食品添加剂山梨酸进行快速定量检测。结果表明,采用标准加入法消除了样本基体成分的干扰,牛肉粒中山梨酸在0～10.0 mg·L-1质量浓度范围内有良好的线性关系(R2=0.998 9),山梨酸加标回收率为99.2%～99.5%,RSD(n=5)为0.14%。该微型光谱分析系统在食品添加剂检测应用方面表现出良好的实用化前景。     

基于G-SPAD的卫星激光测距回波特性

从盖革模式单光子雪崩光电二极管的光电特性出发,分析了卫星激光测距的测距精度与激光脉冲宽度及回波强度的关系,并利用长春站卫星激光测距系统对地球动力学卫星进行观测.结果表明,当回波光子数为1 000左右时,系统测距精度为10.2mm左右,当回波光子数为8 000时,测距精度减小为9.4mm左右,表明回波强度较大时,可提高卫星激光测距系统的测距精度;当激光器脉宽为200ps时,系统测距精度为17.3mm,当脉宽为50ps时,系统的测距精度为10.0mm,表明卫星激光测距系统的测距精度随着脉宽变窄得到了有效提高.为进一步验证理论结果,对Ajisai卫星进行实测,分析了高重复频率激光测距系统对系统测距精度的影响,结果表明采用窄脉宽高重复频率的激光测距系统,激光测距有效回波数和标准点密度呈数量级增加,测距精度也有一定的提高.因此,为了改善卫星激光测距系统回波特性,应选用脉宽窄、重复频率高、能量大的激光器作为基于盖革模式单光子雪崩光电二极管的卫星激光测距系统的激光光源.     

Double-rod metasurface for mid-infrared polarization conversion

Resonant responses of metasurface enable effective control over the polarization properties of lights. In this paper,we demonstrate a double-rod metasurface for broadband polarization conversion in the mid-infrared region. The metasurface consists of a metallic double-rod array separated from a reflecting ground plane by a film of zinc selenide. By superimposing three localized resonances, cross polarization conversion is achieved over a bandwidth of 16.9 THz around the central frequency at 34.6 THz with conversion efficiency exceeding 70%. The polarization conversion performance is in qualitative agreement with simulation. The surface current distributions and electric field profiles of the resonant modes are discussed to analyze the underlying physical mechanism. Our demonstrated broadband polarization conversion has potential applications in the area of mid-infrared spectroscopy, communication, and sensing.     

New progress on beam availability and reliability of PKU high intensity CW proton ECR ion source

The stability and reliability of an ion source and its beam availability are extremely significant for any accelerator,especially for those high current long term CW operation ones like ADS. Although the first high quality 306-hours continuous wave(CW) operating curve at 50 m A@35 ke V has been successfully obtained with a standard compact 2.45 GHz ECR ion source at Peking University(PKU), but the uncertainties that caused beam trips before are unacceptable during an accelerator real operation and should be eliminated. Meanwhile, no permission will be given when the beam power is upgraded from 50 m A@35 ke V to 50 m A@50 ke V. To improve the PKU CW proton source quality, several upgrades were done recently. After those improvements, a new long term CW proton beam experiment at 50 m A@50 ke V was carried out in June 2016. The total running time is 300.5 hours, including near 6 hours ion source preparation and 294 hours non-disturb continuous operation. Within the continuous 13 days operation, no beam-off happened, no spark was observed,no beam drop appeared, no interrupting action was needed, and only a few beam fluctuations caused by the air conditional failure occurred. Beam availability and reliability within the 294 hours is 100%. The root-mean-square(RMS) emittance of this 50 m A@50 ke V CW proton beam is about 0.186 π.mm.mrad. A careful inspection of the ion source was done after this long term operation and no obvious damage was found. The restart experimental results obtained after the ion source inspection prove the high repeatability of PKU PMECRIS. In addition, a 130-m A H+beam was obtained at 50 k V with duty factor of 10%(100 Hz/1 ms) with this source. Details will be presented in this paper.     

光学超振荡与超振荡光学器件

传统光学器件的衍射极限极大地制约了远场超分辨光学系统的进一步发展.如何从光学器件层面突破光学衍射极限瓶颈,实现非标记远场超分辨光学成像,是光学领域面临的巨大挑战.光学超振荡在不依靠倏逝波的条件下,可以在远场实现任意小的亚波长光场结构,这为突破光学衍射极限提供了一条崭新的途径.近年来,光学超振荡现象和超振荡光学器件的相关研究得到了快速发展,在理论和实验上成功地演示了超振荡光场的产生和多种超振荡光学器件,并在实验上展示了超振荡光学器件在非标记远场超分辨光学显微、成像以及超高密度数据存储等应用领域的巨大优势和应用潜力.本文对光学超振荡相关理论、超振荡光学器件设计理论和方法、超振荡光学器件发展现状、超振荡光场测试方法以及超振荡光学器件的应用等方面进行详细介绍和分析.     

基于一代像增强器的高分辨率X射线相机

为了实现在较低剂量下获得较高的分辨率,研制了一款价格低廉的X射线CCD相机。该相机使用硫氧化钆作为转换屏、经一代像增强器增强后的图像通过光锥耦合到CCD相机上;为了提高系统的光传输效率,提出了将像增强器输出直面板或倒像器直接更换成光锥,其小端直接同CCD相机耦合的方案;通过灰度分析计算对比度曲线,拟合得出系统的本征空间分辨率为13 Lp/mm;通过拍摄实际景物,可以清晰地看到其内部的细节,显示出比较好的图像质量。     

四苯基卟啉锌-单壁碳纳米管复合薄膜的制备与光电特性研究

使用喷涂法制备了四苯基卟啉锌(ZnTPP)薄膜及ZnTPP-单壁碳纳米管复合薄膜。采用金相显微镜、扫描电子显微镜、台阶仪、四探针测试仪、紫外-可见光分光光度计、傅里叶红外光谱仪对薄膜的形貌、电学及光学性能等进行了系统的测量,研究了ZnTPP薄膜及ZnTPP-碳纳米管复合薄膜的太赫兹响应特性。结果表明,ZnTPP的太赫兹指纹谱峰为44,57,77,88,95和102 cm-1,与文献[3]报道的棕树叶中叶绿素的指纹谱峰基本一致。重要的是,通过与碳纳米管相复合的方法,不仅使ZnTPP有机薄膜的均匀性及致密性得到了改善,还使后者的导电性及在紫外到太赫兹波段的光吸收性能获得明显增强。此外,还发现了复合薄膜在47及66 cm-1处出现新的太赫兹吸收峰,证明了碳纳米管和ZnTPP之间存在的相互作用。这种作用使复合薄膜的综合性能得到提高。结果表明,通过加入碳纳米管,能够对ZnTPP的薄膜质量以及电学和光学性能等进行有效的改善,使之具有综合优良的物理性能、具备光电器件的应用前景。研究成果对促进有机物的太赫兹光谱研究以及寻找新型太赫兹有机敏感材料等具有重要意义。     

单摆实验数据处理方法的研究

分析了单摆实验中数据处理的列表法、图解法、最小二乘法,同时提出了逐差法和软件拟合法。在讨论和比较这五种实验数据的基础上,提出如何根据单摆实验目的进行科学选择数据处理方法。