分光计调整方法的改进及白光色散研究

普通物理实验中使用分光计观察白光散射,测量三棱镜顶角,最小偏向角等。但在测量前需借助三棱镜调整分光计,有人通过理论分析发现传统的调节方法存在误调和误差,并提出了改进的实验调整方法。本文我们通过实验来验证该方法是否可行,并在实验中发现了其它的问题。     

对硝基苯酚分子印迹聚合物最佳功能单体的筛选及其水样固相萃取中的应用

以对硝基苯酚(4-NP)为对象,采用非印迹聚合物(NIP)库筛选法选出乙烯基咪唑为最佳功能单体,通过实验选出乙腈为最合适的聚合溶剂、三甲氧基丙基三甲基丙烯酸酯(TRIM)为交联剂制备分子印迹聚合物。对固相萃取进行了优化,用pH=2.5的磷酸盐缓冲溶液上样、体积比为45∶55的乙腈和磷酸盐缓冲溶液淋洗、甲醇洗脱条件下,聚合物具有最佳印迹效果。4-NP分子印迹聚合物的表观吸附量达到5.8 mg/g。该印迹聚合物对4-NP及其结构类似物苯酚和对氯苯酚的萃取回收率分别为96.0%、78.8%和77.8%,表明具有较高的选择性,还成功地用于自来水样品中4-NP的固相萃取,回收率达到93.1%。由此可得该方法快速、有效,可用于分子印迹聚合物优化制备。     

Characteristics of Sn-Doped Ge2Sb2Te5 Films Used for Phase-Change Memory

Sn-doped Ge2Sb2Te5 thin films deposited on Si（100）/SiO2 substrates by rf magnetron sputtering are investigated by a differential scanning calorimeter, x-ray diffraction and sheet resistance measurement. The crystallization temperatures of the 3.58 at.%, 6.92 at.% and 10.04 at.% Sn-doped Ge2Sb2Te5 thin films have decreases of 5.3, 6.1 and 0.9℃, respectively, which is beneficial to reduce the switching current for the amorphous-to-crystalline phase transition. Due to Sn-doping, the sheet resistance of crystalline Ge2Sb2Te5 thin films increases about 2-10 times, which may be useful to reduce the switching current for the amorphous-to-crystalline phase change. In addition, an obvious decreasing dispersibility for the sheet resistance of Sn-doped Ge2Sb2Te5 thin films in the crystalline state has been observed, which can play an important role in minimizing resistance difference for the phase-change memory cell element arrays.     

Single Cell Element of Chalcogenide Randoul Access Memory Fabricated with the Focused Ion Beam Method

A singie cell element of chalcogenide random access memory was fabricated by using the focused ion beam method.The contact size between the Ge2Sb2Te5 Phase change film and the top electrode film is about 600nm (diameter) and the contact area is caiculated to be 0.28μm^2.The thickness of the phase change film is 83nm.The current-voltage characteristics of the cell element are studied using the home-made current-voltage tester in our laboratory.The minimum threshold current of about 0.6mA is obtained.     

工业X射线机的射束均匀性检验

在与法国某公司的合作项目中,对射线机的性能做了充分的评估,针对工业X射线机射束均匀性的检验给出了实验内容、过程和结果分析。实验所用射线机分别为ISOVOLT320/13与XYD-225/10,两台设备的实验结果均符合该公司质控文件规定,满足黑度差不超过0.3的要求。定期对射线机进行射束均匀性检验,将有利于监测射线机的工作状态,以保证检测工作的准确性和一致性。     

A Simple Model for Measuring Refractive Index of a Liquid Based upon Fresnel Equations

Due to many experimental data required and a lot of calculations involved, it is very complex and cumbersome to model prism-based liquid-refractive-index-measuring methods. We develop a new method of mathematical modelling for measuring refractive index of a liquid based upon the Fresnel formula and prism internal reflection at an incident angle less than the critical angle. With this method, only two different concentrations measurements for a kind of solution can lead to the determination of computational model. Measurements are performed to examine the validity of the theoretical model. Experimental results indicate the feasibility of the theoretical model with an error of 1%. The method is also capable of measuring even smaller changes in the optical refractive index of the material on a metal surface by the surface plasma resonance sensing techniques.     

Development of the Technique for Fabricating Submicron Moire Gratings on Metal Materials Using Focused Ion Beam Milling

A focused gallium ion （Ga＋） beam is used to fabricate micro/submicron spacing gratings on the surface of porous NiTi shape memory alloy （SMA ）. The crossing type of gratings with double-frequency （25001/mm and 50001/mm） using the focused ion beam （FIB） milling are successfully produced in a combination mode or superposition mode. Based on the double-frequency gratings, high-quality scanning electron microscopy （SEM） Moird patterns are obtained to study the micro-scale deformation of porous NiTi SMA. The grating fabrication technique is discussed in detail. The experimental results verify the feasibility of fabricating high frequency grating on metal surface using FIB milling.     

关于圆周率的一些常识

对于圆周率π，从小学阶段开始，我们就经常碰到它．对于这样一个十分熟悉的符号，你对它了解多少呢？本文简单谈一谈关于丌的一点常识．     

一个具有时滞和功能反应的非自治阶段结构的捕食模型

研究一个具有时滞和功能反应的非自治阶段结构的捕食模型,其中食饵种群分两个阶段——幼年和成年,且捕食种群只捕成年食饵.通过利用微分不等式、比较定理和构造适当的Lyapunov泛函,得到该模型的永久持续生存和绝灭的充分条件,同时也得到了周期系统存在唯一全局渐近稳定的周期解的充分条件.     

1986年哈雷彗星的分裂

1986年3月25日在新西兰John 山天文台拍摄的9张照片,显示出哈雷彗星的彗核分裂成相隔甚远的两个分立彗核。投影在天空切平面上的分离距离约为5×10³km。主核和小伴核都呈现有它们自身的彗发。伴核有一个高达几千公里的突出喷流,而且伴核必定在数天以内即消失不见。结合陈培生等的光电观测结果,看来分裂与一个爆发事件相关。并对有些照片作了数字成像增强处理。