Digisorb 2600型物理吸附仪真空系统检漏、故障分析及对策

就Ｄｉｇｉｓｏｒｂ２６００型物理吸附仪的真空系统拟出了表格形式的基本检漏步骤，并在此基础上详细介绍了几例特殊真空故障的查找，分析及解决方法。     

二维网状铜(Ⅱ)配合物的合成及晶体结构表征

A Cu(Ⅱ) complex [Cu(L)_1.5(OSO₃)]·3H₂O (1) [L=1,4-bis(imidazol-1-yl)benzene] was synthesized by reaction of ligand L with CuSO₄·5H₂O using solvothermal method and its structure was determined by X-ray crystal structure analysis. The structure indicates that the complex crystallizes in triclinic, space group P1 with a=0.948 8(2), b=1.078 5(2), c=1.108 4(2) nm, α=74.820(2), β=81.331(2), γ=72.638(2)°, V=1.041 5(3) nm³, Z=2, D_calc=1.687 g·cm^-3, F(000)=544, μ=1.205 cm^-1, the final R=0.062 3 and wR=0.132 8. The Cu(Ⅱ) atom has distorted square-pyramidal environment with a N₃O₂ donor set. Each L ligand links two Cu(Ⅱ) atoms using its imidazole groups to form an infinite one-dimensional (1D) ladder-like chain, which further linked by SO₄^2- to form a two-dimensional (2D) network structure. The 2D sheets are further connected by C-H…O hydrogen bonds to give a three-dimensional (3D) structure. CCDC: 650388.     

Sm_(0.5)Sr_(0.5)CoO_3阴极氧还原动力学

利用极化、交流阻抗技术考察了担载于La0.9Sr0.1Ga0.8Mg0.2O3(LSGM)电解质上的Sm0.5Sr0.5CoO3-La0.8Sr0.2Ga0.8Mg0.15Co0.05O3(SSC-LSGMC5)复合阴极的氧还原反应动力学.在SSC-LSGMC5阴极氧还原反应的阻抗谱中可以观察到明显的两个半圆.高频环的电导与氧分压无关,低频环的电导正比于氧分压的0.5次方.并且低频环的氧分压级数随着反应温度的降低而减小,可能对应于吸附氧原子的扩散过程.SSC-LSGMC5极化曲线与经典的Butler-Volmer方程吻合.阴、阳极的电荷转移系数均为1左右,交换电流密度的氧分压级数为1/4,对应于电荷转移过程.实验结果显示SSC-LSGMC5上的氧还原反应机制随反应条件的不同而发生变化.     

溴化环氧/Novolacs体系在CEM-3板中的应用

分别以PN、BPFN和BPAN为溴化环氧A80的固化剂,以DMP-30、HMTA和2-MZ为促进剂制备CEM-3覆铜板,研究了这三种线型酚醛树脂作为固化剂对CEM-3覆铜板力学性能、电性能、吸水性和耐热性等的影响.结果表明,以三种线型酚醛树脂为固化剂制备的CEM-3覆铜板的力学性能相近,而吸水性由高至低的顺序为PN＞BPFN＞BPAN,介电性能由高至低的顺序为BPFN≈BPAN＞PN,Tg由高至低的顺序为PN＞BPFN＞BPAN.由BPAN和BPFN为固化剂制备的CEM-3覆铜板经150℃/2h后处理,耐变色性明显优于PN为固化剂制备的CEM-3覆铜板.     

2,4-二甲氧基苯甲酰氯的合成

2,4-二羟基苯甲酸与硫酸二甲酯经甲基化反应得到2,4-二甲氧基苯甲酸(3);3与SOCl2发生氯化反应合成了2,4-二甲氧基苯甲酰氯(4)。较佳的氯化反应条件为:325mmol,苯70mL,AlCl3250mg,回流反应1.5h,重结晶溶剂为石油醚(90℃～120℃),总产率达74.1%。2～4的结构经1HNMR和FT-IR表征。     

一种新型毛细管电泳双圆盘电极电导检测池

研制厂一种新型双凼盘电极毛细管电泳电导检测池。从理论和实验上分析验证了电导池参数、电导池位置对检测器性能的影响该检测池不仅结构简单、易于制作，而且极大地减小了柱外区带展宽，消除了高电压对检测器的影响，获得了较高的分离效率和信噪比采用Li^＋、Na^＋、K^＋的混合物对该检测池的性能进行了测试在最佳实验条件下，其俭出限分别为5．1、3．9和2．3μmol／L。     

Pd_2(dba)_3/BINAP催化合成1,4-双-(4′-苯胺基苯酰基)苯

以Pd2(dba)3/BINAP催化1,4-双-(4′-溴苯酰基)苯和苯胺反应,合成了1,4-双-(4′-苯胺基苯酰基)苯,其结构经UV,1HNMR,13CNMR和元素分析表征。     

Sr2YRuO6有序双钙钛矿结构及其Mott绝缘体的研究

运用第一性原理方法对双钙钛矿Sr2YRuO6各种可能的无序结构和有序结构的能量进行计算,计算结果显示有序结构双钙钛矿具有最低能量,说明该结构最稳定,这一结果也与实验中样品的多晶样品X射线衍射图(XRD)中出现超晶格有序峰相符合。通过计算给出该材料的能带,显示该材料是Mott绝缘体,这一结论也与实验结果相一致。     

A Kinetic Evidence for the Nitroxyl Radicals Recycling Mechanism in the Photostabilizing Process of HALS

The photoinduced bulk polymerization of a reactive-hindered amine fight stabilizers(r-HALS), 4-acryloyl-2, 2, 6, 6-tetramethylpiperidinyl (ATMP), was performed at 80℃ by using a DPC technique. An unique periodic exponential attenuation-type oscillating curve was found when the polymerization was carried out in air, but this phenomenon was not found in nitrogen.It is supposed that this unique kinetic performance may be attributed to nitroxyl radicals that are produced in situ from the oxidation of ATMP. ATMP polymer with narrow polydispersity (d =1.03) can be obtained by photoinduced solution polymerization of ATMP. The signal detected in ESR may be assigned to the nitroxyl radicals in the matrix of ATMP polymer. Since this kind of recycling of nitroxyl radicals is well documented for the photostabilizing mechanism of HALS, the present results may serve as a kinetic evidence for this mechanism.