QuEChERS结合超高效液相色谱－四极杆/静电场轨道阱高分辨质谱法同时测定全血中10种新型合成大麻素

建立了QuEChERS结合超高效液相色谱-四极杆/静电场轨道阱高分辨质谱（UPLC－QE－Orbitrap MS）同时测定全血中10种新型合成大麻素的分析方法。全血样本经优化的QuEChERS法提取后,采用Hypersil GOLDTM Vanquish色谱柱（100 mm × 2.1 mm,1.9 μm）,以0.1%甲酸水和0.1%甲酸乙腈为流动相进行梯度洗脱分离,在加热电喷雾离子源正离子/平行反应监测（HESI+/PRM）模式下同时进行检测。结果表明,10种目标物质在对应质量浓度范围内呈良好线性,相关系数（r2）均不小于0.999 0,检出限（LOD）为0.01 ~ 0.05 ng/mL,定量下限（LOQ）为0.05 ~ 0.20 ng/mL,回收率为92.1% ~ 115%,基质效应为86.6% ~ 115%,日内相对标准偏差（RSD）均不大于8.5%,日间RSD均不大于10%。该方法具有操作简便、选择性好,检测灵敏度及回收率高的特点,适用于法庭科学全血样本中合成大麻素的检验鉴定。     

HPLC－MS/MS法测定婴幼儿果蔬米粉中17种新烟碱类杀虫剂及代谢物

建立了婴幼儿果蔬米粉中17种新烟碱类杀虫剂及代谢物的高效液相色谱－串联质谱（HPLC－MS/MS）分析方法。样品经含1%（体积分数）甲酸的乙腈提取,QuEChERS净化,氮气吹干后,用含0.1%甲酸的乙腈水溶液（1∶4,体积比）定容。采用Acquity BEH C18色谱柱（2.1 mm × 100 mm,1.7 μm）分离,0.1%甲酸水溶液和乙腈作为流动相梯度洗脱,高效液相色谱－串联质谱检测。结果表明,17种目标物在对应的质量浓度范围内线性良好,相关系数（r）均大于0.995 4;方法检出限（LOD）为0.02 ~ 0.15 μg/kg,定量下限（LOQ）为0.06 ~ 0.50 μg/kg;在LOQ、2.0 μg/kg、10.0 μg/kg 3个加标水平下,17种目标物在水果米粉中的平均回收率为62.5% ~ 103%,相对标准偏差（RSD）为3.5% ~ 17%;蔬菜米粉中的平均回收率为66.4% ~ 108%,RSD为4.3% ~ 13%。该方法灵敏、准确,简便、可靠,适用于婴幼儿果蔬米粉中17种新烟碱类杀虫剂及代谢物的同时检测。     

Thermal- and Light-driven Metathesis Reactions Between Different Diselenides

Thermal- and light-driven diselenide metathesis reactions with different types of diselenides are investigated systematically. Their exchange reaction rates and equilibrium conversions are compared in the aspects of the different diselenide structures, activation conditions and solvents. As a result, the metathesis reactions between diselenide small molecules are demonstrated with high dynamic and sensitive features, which can be broadly tuned by varying the electron affinity and aromaticity of the diselenide substituents and external conditions(e.g., solvent, stimulus mode). The current work thus will not only advance our understanding on diselenide metathesis chemistry, but also promote concrete and impactful studies in selenium-containing materials.     

Block Copolymer Supported Gold Nanoparticles Assemblies with Exposed Gold Surface

Polymer-involved nanoparticles or nanoparticle assemblies are now facing a crossroad, where the exposure of nanoparticle and multiple nanoparticles cannot be obtained at the same time. Therefore, a new series of nanoparticle clusters is synthesized, where multiple gold nanoparticles assemble with amphiphilic block copolymers supporting inside. The exposure of gold nanoparticles of the structure is confirmed and increases the reduction rate of 4-nitrophenol by 60%. The assemblies can also be used as surface enhanced Raman scattering(SERS) probes with an enhancement factor(EF) as high as 3×10³.     

长庆油田石油磺酸盐中活性组分识别

石油磺酸盐中活性组分的识别对于磺化原料油的选择和磺酸盐产品界面活性的稳定具有重要的指导意义.开展石油磺酸盐关键活性物质结构的确定与活性检测研究,可以提升高品质石油磺酸盐生产的可控性.采用液相色谱制备技术,结合质谱分析和界面张力测试评价,从长庆石油磺酸盐样品中成功分离制备出了具有优异界面活性的关键活性组分.试验结果表明,其活性组分占总石油磺酸盐含量的7.3%,可以将油水界面张力快速降至超低(<1.0×10^(-3) mN/m),且具有广泛的油相普适性,对于正己烷~正十六烷油相以及多种油田来源原油,均可将油水界面张力降至超低.此外,活性组分以单磺酸盐为主,平均相对分子质量为414(不含Na^(+)),相对分子质量分布范围在380~450之间,主要组成是以多种同分异构体结构形式存在的十七烷基苯磺酸盐和十八烷基苯磺酸盐混合物.     

经腹彩色多普勒超声检查对子宫内膜异位症的诊断价值

本研究选取我院100例子宫内膜异位症患者作为病例组、同期健康妇女100例作为对照组,探讨了经腹彩色多普勒超声检查对子宫内膜异位症患者子宫动脉血流特征、子宫特征的诊断价值。结果显示,病例组的子宫体积、子宫内膜厚度测定值均大于对照组(P<0.05);摆动子宫颈后,病例组的EDV测定值低于对照组,RI测定值大于对照组(P<0.05);通过绘制ROC曲线,可知EDV、RI、子宫体积大小、子宫内膜厚度诊断子宫内膜异位症的AUC值均超过0.65,灵敏度和特异度都较高,漏诊率和误诊率也在可控范围内。本研究证实,通过经腹彩色多普勒超声检测子宫动脉血流参数及子宫形态特征,对诊断子宫内膜异位症具有一定的临床参考价值。     

Size-controllable carbon spheres doped Ni (II) for enhancing the catalytic oxidation of methanol

Ni(II)/CSs were prepared using a simple two-step hydrothermal method. The morphology and composition of the catalysts were studied with scanning electron microscope, transmission electron microscope, and X-ray diffraction. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy showed that the surface of the prepared carbon spheres was rich in hydroxyl groups, which was beneficial to remove CO intermediates, and therefore, improving the catalytic efficiency and the antipoisoning ability of the catalysts. The results of cyclic voltammetry and chronoamperometry showed that the electrocatalytic activity and stability of Ni(II)/CSs were higher than that of unloaded NiAc under alkaline environment. When the nickel content was 5 wt.%, the peak oxidation current density of methanol on Ni(II)/CSs electrocatalyst reached the maximum of 34.54 mA/cm², which was about 1.8 times that of unloaded NiAc. These results indicate that Ni(II)/CSs has potential applications in the electrocatalytic oxidation of methanol.     

具有刺激响应型铜(Ι)配位聚合物的合成、结构及其荧光性质研究

以三(4-(吡啶-4-基)苯基)胺和Cu₄I₄(PPh₃)₄为原料,在水热条件下合成了一个新的Cu(Ι)配合物[Cu₂I₂(TPPA)₂]_n·4H₂O[1, TPPA=三(4-(吡啶-4-基)苯基)胺],其结构经IR、元素分析、X-射线单晶衍射表征。1属正交晶系,'P b c n'空间群,晶胞参数a=29.257(5) Å, b=12.621(2)Å, c=18.304(4) Å, α=90°, β=90°, γ=90°。固态荧光测试结果显示,在365 nm激发态下,配合物1在低温时具有多重发射峰,在CIE坐标下对其颜色做了一定的探究,可作为优良发光材料应用于LED上调节白光。      

Fabrication and Excellent Antibacterial Activity of Well-defined CuO/Graphdiyne Nanostructure

Copper oxide(CuO),due to its low cost,good chemical and physical stability,has recently been given special attention as a potential candidate for antibacterial agents.However,developing novel CuO nanocomposites with improved antibacterial property and unraveling the interface promotion mechanism has been a fundamental challenge for decades.Herein,well-defined CuO/graphdiyne(CuO/GDY)nanostructures with uniformly anchored CuO nanoparticles(ca.4.5 nm)have been fabricated.The CuO/GDY nanostructure exhibited superior E.coli inactivation efficiency,which is nearly 19 times and 7.9 times higher than the bare GDY and commercial CuO,respectively.The improved E.coli inactivation performance was mainly due to the increased reactive O2-species generated by the activation of molecular O2 over CuO/GDY surface.These findings demonstrate the efficient antibacterial activity of well-defined CuO/GDY nanostructures and provide insights on the development of efficient GDY-based antibacterial materials.     

Oxide Nanofibers as Catalysts Toward Energy Conversion and Environmental Protection

Ultrathin oxide nanofibers are widely used in an array of catalytic applications toward energy conversion and environmental protection. Remarkable progress has been made with regard to the development of engineering oxide nanofibers into unique structures to suit or enable various functions. We aim to provide a comprehensive overview of oxide nanofibers, including the structure engineering, derivates, assemblies and their applications. We begin with a brief introduction to the production of nanofibers with diversified compositions, structures and properties, followed by discussions of the wet-chemistry derivates. Afterward, we discuss the applications of catalytic oxide nanofibers, including electrocata-lysis, photocatalysis and thermal-catalysis. Then we highlight the most significant role of oxide nanofibers as catalyst support for the immobilization of metal nanoparticles. Moreover, we showcase the advanced assemblies based on oxide nanofibers, including their use as multi-functional membranes and foams. In the end, we offer perspectives on the challenges, opportunities and new directions for future development.