一维链状配位聚合物{[Cu(μ-H_2L)(L)Cl](ClO_4)_3}_∞的合成、结构及磁性研究(L=N,N'-双(吡啶基-3-亚甲基)-1,5-二氮环辛烷)

设计合成了一个新型吡啶基二氮环配体L(N,N'-双(吡啶基-3-亚甲基)-1,5-二氮环辛烷)及其铜配位聚合物{[Cu(滋-H2L)(L)Cl](ClO4)3}∞(1),研究了此配合物的晶体结构、光谱及磁性质。该配合物属正交晶系,Pnma空间群,晶胞参数为a=3.5170(17)nm,b=1.0440(5)nm,c=1.1966(6)nm,V=4.394(4)nm3,Z=4。配体L以顺式螯合和反式桥联两种不同的配位形式将铜离子连接起来形成一维链状阳离子结构。     

Synthesis and Characterization of Dual Acidic Ionic Liquids

Novel ionic liquids with dual acidity, of which the cation contains Brφnsted acidity and anions contain Lewis acidity were synthesized. These ionic liquids obtained were identified by NMR, FF-IR, SDT and FAB-MS. Their acidities were determined by pyridine probe on IR spectrography.     

110K铋基超导相形成的组成条件

Bi-Sr-Ca-Cu-O超导材料中存在110K和80K2个超导相。其组成是Bi_2Sr_2Ca_2Cu_3O_y和Bi_2Sr_2CaCu_2O。但迄今为止,在按2223组成比合成的未掺杂Bi系超导材料中从未得到过纯的110K相,也未见过组成为2223,零电阻温度在100K以上材料的报道。为了探索形成110K相的最佳条件,本文以2223组成比为参考,合成了5个系列材料:Bi_xSr_2Ca_2Cu_3O_y,Bi_2Sr_xCa_2Cu_3O_y,Bi_2Sr_2Ca_xCu_3O_y,Bi_2Sr_2Ca_2Cu_xO_y,Bi_i Sr_uCa_yCu_wO_s。     

铈、镨二乙基磷酸盐的晶体结构

合成了Ce[PO_2(OC_2H_5)_2]_3和Pr[PO_2(OC_2H_5)_2]_3(简称Ce(DEP)_3和Pr(Pr(DEP)_3)。用四圆衍射仪测定了其晶体结构。它们均属三斜晶系,空间群P1。晶胞参数,对Ce(DEP)_3:α=10.324(4)A,b=12.861(4)A,c=13.998(5)A,x=106.49(3)°,β=112.83(4)° γ=115.61(3)°,V=1296(1)A~3,Z=2;对Pr(DEP)_3:α=10.27(1)A,b=11.81(1)A,c=12.51(1)A,x=109.93(9)°,β=111.9(9)°,γ=93.0(1)°,V=1293(3)A~3,Z=2。用Patterson法并经分块全矩阵最小二乘法修正,最后的R值,Ce的为0.1071,Pr的为0.1066。结构分析指出,两种配合物结构类似,Ce和Pr原子均由二乙基磷酸根的六个氧原子配位形成八面体构型。     

PURIFICATION AND PARTIAL CHARACTERIZATION OF POLYSACCHARIDES FROM THE POLLEN OF TYPHA ANGUSTIFILIA L

Three polysaccharides TAA, TAB and TAC were purified from the pollen of Typha An-gustifilia L..TAA is mainly composed of α-L-arabinofuranose, β-D-galactose and α-D-galac-turonic acid.TAB and TAC contain the backbone mainly composed of (1→5)-linked-L-arabi-nosyl residue.     

双(1,3-二硫杂环戊烯-2-硒酮-4,5-二硫)金属配合物的合成及其电化学性质的研究

以1，3-二硫杂环戊烯-2-硒酮-4，5-二硫盐为配体与二价金属离子配位合成了4种双(1，3-二硫杂环戊烯-2-硒酮-4，5-二硫)金属配合物，研究了它们的电化学性质和UV—Vis光谱，并讨论了形成中性产物的原因。     

Studies of poly-<Emphasis Type="Italic">L</Emphasis>-lysine-starch nanoparticle preparation and its application as gene carrier

Anion starch nanoparticle (StNP) with a diameter of 50 nm was prepared in water-in-oil microemulsion, with soluble starch as raw materials and POCl₃ as crosslinking agent. PLL-StNP was prepared by linking poly-L-lysine (PLL) on the surface of StNP. At the same time, the size of PLL-StNP and its stability in aqueous solution were checked by AFM. The analysis of plasmid DNA binding, DNase I enzymatic degradation, toxicity and transfection were done. We discovered that PLL-StNP may be used as non-virus nanoparticle gene carrier. And we developed the method of preparing PLL-StNP gene carrier and used it in cell transfection. As non-virus gene carrier, PLL-StNP has some advantages, such as large load of DNA, high transfection efficiency, low cell toxicity and biodegradability.     

Synthesis, structure and fluorescence of a novel diarylethene

The photochromic diarylethene, 1,2-bis(2-methyl-5-(2-(1,3-dithiolpentane))-thien-3-yl)perfluorocyclopentene (BMDTP), has been synthesized in high yield and its structure was determined by X-ray crystallographic analysis. The compound undergoes a photochromic reaction both in solution and in the single crystalline phase. In addition, its fluorescence property in solution is discussed.     

Running buffers for determination of chromium(VI)/(III), cobalt(II) and zinc(II) in complex matrices by capillary electrophoresis with contactless conductivity detection

Complex matrices and rather high acidity in environmental samples are often the impelling challenges for the used running buffers of capillary electrophoresis. Twelve binary acid-base buffers were evaluated for separation of Cr(VI)/Cr(III), Co²⁺ and Zn²⁺ in a sample containing various salts by capillary electrophoresis with contactless conductivity detector. The malic acid (MA) systems including MA-His (histidine), MA-Arg (arginine) and MA-Tris (tris(hydroxymethyl)aminomethane) were selected as the candidates with powerful separation efficiency and good response sensitivity. In the MA-Tris buffer, optimization were further carried out in terms of the pH value and the concentration of MA, and the optimal conditions were obtained as 6 mM MA-Tris and 2 mM 18-crown-6 at pH 3.5. Furthermore, a real application was demonstrated by analyzing the plating rinse water (pH 0.8), in which the Ca²⁺, Na⁺, Cr(VI)/Cr(III), Co²⁺ and Zn²⁺ were all detected by adjusting at pH 3.5 with 5% (v/v) diluent ammonia. Both the cations, e.g., K⁺, Ca²⁺, Na⁺, Mg²⁺, and the common high concentration anions in the sample, e.g., Cl⁻, SO₄²⁻ and NO₃⁻ did not cause any disturbance to the concerned analytes.     

三阶导数分光光度法同时测定铜,钴与镉

采用三阶导数光谱技术，以ｍｅｓｏ－四（４－三甲铵基苯基）卟啉作显色剂分光光度法同时测定了微量的铜、钴与镉。方法中以铅离子掩蔽过剩试剂的吸收峰，然后进行三级微分求导，可以使铜、钴、镉吸收峰完全分开，于４１５ｎｍ、４３４ｎｍ及４３８ｎｍ处同时测定３元素含量，由三阶导数光谱的吸光值可求算出配合物的三阶导数摩尔吸光系数分别为：１．１１×１０６、３．９５×１０５及６．４７×１０５Ｌ·ｍｏｌ－１·ｃｍ－１。