催化光度法测定痕量甲醛

基于磷酸介质中甲醛催化溴酸钾氧化溴甲酚紫的褪色反应 ,建立了测定痕量甲醛的方法。方法的检出限为 1.0× 10 - 5g·L- 1,线性范围为 0 .0 2 0～ 0 .4 8μg·ml- 1,方法简便 ,用于空气中测定痕量甲醛 ,结果满意。     

相反转技术制备环氧树脂水基体系——相反转过程的流变行为研究

对高乳化剂浓度下的相反转发展过程的流变行为进行了应力扫描、动态频率扫描实验表征．结果表明，乳化剂浓度较高时，体系发生完全相反转；体系在相反转点前为Ｗ／Ｏ结构，其粘度几乎不随剪切应力的改变而改变，表现为牛顿流体行为；体系在相反转点后为Ｏ／Ｗ结构，具有很高的粘弹性，并且在较高剪切应力下表现为典型的假塑性．这是由于高分子水基微粒间通过其表面覆盖的表面活性剂与水形成氢键而产生了一种静态结构，此结构在较高剪切应力作用下破坏而导致假塑性．     

Physical properties and electrochemical performance of LiMn2O4 cathode materials prepared by a precipitation method

LiMn₂O₄ powder for lithium-ion batteries was prepared by a precipitation method, and the effects of calcination temperature on the physical properties and electrochemical performance of the samples were investigated by various methods. The results of X-ray diffraction (XRD) showed that the lattice parameter (a) and the unit cell volume (v) decrease with the increasing calcination temperature, and the LiMn₂O₄ sample calcined at 750°C has smaller particle size and higher crystallinity than other samples. The results of the electrochemical experiments showed that the sample calcined at 750°C has larger peak currents, higher initial capacity, and better cycling capability, because of its lower charge-transfer resistance and larger diffusion coefficient of Li⁺ ions than those of other samples.     

STUDIES ON THE SPHERULITE FORMATION IN MELT CAST POLYCAPROLACTONE BASED POLYURETHANES

A series of PCL/MDI/BDO segmented polyurethanes have been synthesized by two-step method in solution.The hard segment content ranges from 10% to 48% by weight, and the molecular weight of PCL diols is 1500. Hard segment spherulites have been observed in compression molded specimens of all of the samples except the one of the lowest hard segment content. The difficulty in sphernlite formation was explained as only in a small temperature range,the microphase separation rate may be faster than the crystallization rate and all these processes are very slow due to the hydrogen bonding between hard and soft segments and the interactions between hard segments themselves. PCL soft segments of molecular weight 1500 is still crystallizable and may form different crystalline superstructures.     

Novel dual inhibitors against FP-2 and PfDHFR as potential antimalarial agents: Design,synthesis and biological evaluation

A series of novel 2,4-diaminopyrimidine-modified compounds was designed and synthesized. Compound 14 showed micromolar dual inhibitory effect on both FP-2 and PfDHFR, and potential inhibition to the proliferation of P. falciparum 3D7 strain and chloroquine-resistant P. falciparum Dd2 strain.     

Homolysis of the Ln-N (Ln = Yb, Eu) bond. Synthesis, structural characterization and catalytic activity of ytterbium(II) and europium(II) complexes with methoxyethyl functionalized indenyl ligands

The interaction of methoxyethyl functionalized indene compounds (C(9)H(6)-1-R-3-CH(2)CH(2)OMe, R =t-BuNHSiMe(2)(1), Me(3)Si (2), H (3)) with [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5)) produced a series of new ytterbium(II) and europium(II) complexes via tandem silylamine elimination/homolysis of the Ln-N (Ln=Yb, Eu) bond. Treatment of the lanthanide(III) amides [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5) with 2 equiv. of, 1,2 and 3, respectively, produced, after workup, the ytterbium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Yb(II) (6), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Yb(II) (7), (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Yb(II)(8) and the corresponding europium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Eu(II)(9), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Eu(II)(10) and (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Eu(II)(11) in moderate to good yield. In contrast, interaction of the corresponding indene compounds 1, 2 or 3 with the lanthanide amides [(Me(3)Si)(2)N](3)Ln (Ln = Yb, Eu) was not observed, while addition of 0.5 equiv. of anhydrous LiCl to the corresponding reaction mixture produced, after workup, the corresponding ytterbium(II) or europium(II) complexes. All the new compounds were fully characterized by spectroscopic and elemental analyses. The structures of complexes, and were determined by single-crystal X-ray analyses. The catalytic activity of all the ytterbium(II) and europium(II) complexes on MMA polymerization was examined. It was found that all the ytterbium(II) and europium(II) complexes can function as single-component MMA polymerization catalysts. The temperature, solvent and ligand effects on the catalytic activity were studied.     

Regioselective coupling of pentafluorophenyl substituted alkynes: mechanistic insight into the zirconocene coupling of alkynes and a facile route to conjugated polymers bearing electron-withdrawing pentafluorophenyl substituents

The reaction of Cp(2)ZrCl(2) with 2 equiv of BuLi at -78 degrees C, followed by the addition of an unsymmetrical tetra- or pentafluorophenyl substituted alkyne R(1)C[triple bond]CAr(f) (R(1), Ar(f) = (CH(2))(4)Me, p-C(6)F(4)H; Me, p-C(6)F(4)H; Ph, C(6)F(5)), resulted in regioselective couplings of these alkynes to zirconacyclopentadienes in which the Ar(f) substituents preferentially adopt the 3,4-positions (beta beta) of the zirconacyclopentadiene ring. With Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) as the zirconocene reagent, the couplings could be carried out at room temperature; however, at higher temperatures significant quantities of the 2,4-fluoroaryl substituted (alpha beta) isomers were also formed. None of the conditions employed produced the 2,5-fluoroaryl substituted (alpha alpha) isomers. These fluoroaryl-substituted zirconacyclopentadienes were readily converted to butadienes via reactions with acids. The zirconacyclopentadiene Cp(2)ZrC(4)-2,5-Ph(2)-3,4-(C(6)F(5))(2), which resulted from the coupling of PhC[triple bond]C(C(6)F(5)), was converted to the corresponding thiophene by reaction with S(2)Cl(2), and to an arene by reaction with MeO(2)CC[triple bond]CCO(2)Me/CuCl. Mechanistic studies on zirconocene couplings of (p-CF(3)C(6)H(4))C[triple bond]C(p-MeC(6)H(4)) indicate that the observed regioselectivities are determined by an electronic factor that controls the orientation of at least one of the two alkynes as they are coupled. Additionally, these studies suggest an unsymmetrical transition state for the zirconocene coupling of alkynes, and this is supported by DFT calculations. The reaction of [(C(6)F(5))C[triple bond]CCH(2)](2)CH(2) with Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) resulted in a zirconacyclopentadiene in which the pentafluorophenyl substituents have been forced into the 2,5-positions (alpha alpha). Zirconocene coupling of the diyne (C(6)F(5))C[triple bond]C-1,4-C(6)H(4)-C[triple bond]C(C(6)F(5)) provided a route to conjugated polymers bearing electron-withdrawing pentafluorophenyl groups.     

分散聚合水基聚苯胺乳胶微球制备与表征

水溶性空间稳定剂聚乙烯吡咯烷酮（PVP）存在时，采用分散聚合制备水溶性单分散的聚苯胺(PAn)乳胶粒子，采用透射电子显微镜（TEM）观察粒子形态及尺寸；利用紫外-可见吸收光谱对胶体分散体系进行表征.实验结果表明，当PAn含量较少（w< 16.78％）时， PAn-PVP复合乳胶粒子呈米粒状；当PAn含量较大（w >23.22％）时， PAn-PVP复合乳胶粒子呈球形.     

An efficient route for the preparation of a 21-fluoro progestin-16 alpha,17 alpha-dioxolane,a high-affinity ligand for PET imaging of the progesterone receptor

Two different synthetic routes were explored for the synthesis of fluoro furanyl norprogesterone (FFNP) 1, a high-affinity ligand for the progesterone receptor (PgR) that is being developed as a PET imaging agent for PgR-positive breast cancer. Both approaches proceed through a key intermediate, triol 5. The first approach, starting from keto-ketal 2, employed a dioxenyl group as a synthon for installing a corticosteroid side chain in keto-alcohol 4. The second approach, starting from propargylic acetate 12b, involved the application of a two-step method, a Pd(II)-catalyzed oxidative rearrangement followed by a base-catalyzed acetate rearrangement of the intermediate unsaturated acetate 13b, to generate the requisite corticosteroid side chain in keto-acetate 14b. This intermediate was further elaborated to the final product 1 via efficient dihydroxylation with potassium permangnate, furan acetalization with scandium triflate, and mesylation and fluorination reactions. The palladium-catalyzed route is considerably more efficient than the dioxene approach for the synthesis of key intermediate triol 5, and the scandium triflate-catalyzed acetalization, in particular, led to a considerable improvement in the overall yield of the endo furan acetal alcohol 16a. This route provides a major improvement in the overall yield of the final progestin target, FFNP 1.