具有两台专用机,两台通用机的Q4／／Cmax问题的近似算法

本文讨论具有两台专用机、两台通用机的两组工件的同种类平行机的Q4／／Cmax问题，对这类特殊的排序问题，提出一种启发式算法，得到了最差情况下性能指标的严格的界．     

三层同轴液柱内的热毛细对流的近似解析解

1引言在微重力下用浮区法生长高质量、大体积单晶体是一种很有应用前景的方法，但热毛细对流所引起的诸如宏观不均匀性、生长条纹等缺陷严重限制了这一方法的应用。目前，人们试着用液封方法抑制热毛细对流。文献［1～3］分别对两层流体系统内的热毛细对流所作的研究表明：通过液封，被封层内的热毛细对流可以得到显著抑制。本文对圆柱三层流体系统内的热毛细对流进行研究，为热毛细对流规律的揭示以及进一步总结出其控制方法提供了理论数值依据。2控制方程和边界条件考虑长为L的互不溶混的三层轴对称同轴液柱，如图1所示，两端壁保持定温T…     

Quantum Key Distribution Using High-Dimensional Quantum Error-Avoiding Code

Using high-dimensional quantum error-avoiding code, we present two new quantum key distribution protocols over a collective noisy channel, i.e. six-photon and five-photon quantum error-avoiding codes. Compared with the previous protocols using four-photon and three-photon quantum error-avoiding code, the qubit efficiencies of the new protocols have increases of 16.67% and 5% respectively. In addition, the security of these protocols is analysed with a conclusion that the new protocols are much more secure than the four-photon and three-photon ones.     

2006～201O年宁波非公有制经济领域人才需求预测

通过建立GM(1,1)模型,结合宁波市2005年对非公有制经济领域人才资源的抽样调查数据,对2006～2010年期间宁波市非公有制经济领域人才需求量和人才质量进行动态分析和预测.     

纳米级氧化铁的合成及其对六价铬的吸附性能研究

采用溶胶-凝胶法合成了纳米氧化铁,研究了合成条件,并采用TEM对产品进行了表征,测得产品的平均粒径为20-30nm.研究了纳米级氧化铁对Cr（Ⅵ）的吸附.在pH=3.0,吸附比为3.5×10-6:1×10-2（g/g）时,平均吸附效率为95.98％,最大吸附量为398.3μg Cr（Ⅵ）/g.采用2mol/LNaOH可完全洗脱纳米氧化铁所吸附的Cr（Ⅵ）,测定了回收后的纳米氧化铁对Cr（Ⅵ）的吸附效率,结果表明纳米级氧化铁可循环使用,这将为环境污水中Cr（Ⅵ）的治理及研究纳米材料的吸附行为提供参考.     

源气体对沉积的a-C∶F∶H薄膜结构的影响

采用微波电子回旋共振等离子体化学气相沉积(MWPECRCVD)方法,使用不同的源气体(CHF3CH4,CHF3C2H2,CHF3C6H6)体系制备了aC∶F∶H薄膜.由于CH4,C2H2,C6H6气体在等离子体中的分解反应不同导致了薄膜的沉积速率和结构上的差异.红外吸收谱的结果表明,用C6H6CHF3作为源气体沉积的薄膜中几乎不含H,而用C2H2CHF3所沉积的薄膜中的含氟量最高,其相应的CF振动峰位向高频方向偏移.薄膜的真空退火结果表明,aC∶F∶H薄膜的热稳定性除了取决于薄膜的CC键浓度外,还与CC键 关键词： 氟化非晶碳膜 电子回旋共振化学气相沉积 红外吸收光谱     

Mean Value on the Difference Between a Quadratic Residue and Its Inverse Modulo p

The main purpose of this paper is to use the generalized Bernoulli numbers, Gauss sums and the mean value theorems of Dirichlet L-functions between a quadratic residue and its inverse modulo p value formula. to study the asymptotic property of the difference （a prime）, and to give an interesting hybrid mean     

Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.