Mineralogical analysis of auriferous ores from the El Diamante mine, Colombia

X-ray diffraction (XRD), Mössbauer spectrometry (MS), secondary ions mass spectroscopy (SIMS) and laser-ablation microprobe–inductively coupled plasma–mass spectrometry (LAM–ICP–MS) were used to study mineral samples of Colombian auriferous ores collected from the “El Diamante” mine, located in the municipality of Guachavez-Nariño, in Colombia. The samples were prepared as polished thin sections and polished sections. From XRD data, quartz, sphalerite and pyrite were detected and their respective cell parameters were estimated. From MS analyses, pyrite, arsenopyrite and chalcopyrite were identified; their respective hyperfine parameters and respective texture were deduced. Multiple regions of approximately 200 × 200 μm in each sample were analyzed with SIMS; the occurrence of “invisible gold” associated mainly with pyrite and secondarily with arsenopyrite could thus be assigned. It was also found that pyrite is of the arsenious type. Spots from 30 to 40 μm in diameter were analyzed with LAM–ICP–MS for pyrite, arsenopyrite and sphalerite; Au is “homogeneously” distributed inside the structure of the arsenious pyrite and the arsenopyrite (not as inclusions); the chemical composition indicates similarities of this “invisible gold”, forming a solid solution with arsenious pyrite and arsenopyrite. One hundred nineteen and 62 ppm of ‘invisible gold’ was quantified in 21 spots analyzed on pyrite and in 14 spots on arsenopyrite, respectively.     

Structural phase transformations and physical properties of intercalation compounds in the Cr0.5Ti(Se1−x Tex)2 system

The atomic structure and magnetic and electric properties of the Cr_0.5TiSe₂-Cr_0.5TiTe₂ system of intercalated phases were studied in detail by gradually replacing selenium by tellurium. It was revealed that this replacement changes the crystalline structure from monoclinic in the initial compounds to hexagonal in the compounds containing various types of chalcogen atoms; this is accompanied by disordering of chromium atoms in the van der Waals gaps. The electrical resistance and magnetic characteristics vary nonmonotonically on replacement of selenium by tellurium, which is associated with a change in the degree of atomic disordering during the transition from Cr_0.5TiSe₂ to Cr_0.5TiTe₂.     

Equilibrium States in the Quadruple–Kerr Solution

The extended quadruple–Kerr metric is used to consider equilibrium states of four collinear Kerr particles. We explain our previous failure to solve numerically the full set of the balance equations, and we derive a self–consistent system of the axis conditions leading to the equilibrium of all four constituents which can be black holes or hyperextreme objects. The equilibrium configurations obtained in this paper exhibit similar features with those occurring in the systems of two Kerr particles, for instance, the balance of four Kerr black holes with positive masses does not seem possible. Equilibrium states of two identical compound Kerr objects are also discussed.     

Nanostructures in calcia stabilized hafnia thin films observed by PAC as a function of temperature

The hyperfine quadrupole interaction at Hf sites in films and powders of 14 mol% CaO–HfO₂ and 20 mol% CaO–HfO₂ has been determined as a function of temperature. Results indicate the formation of a cubic solid solution and other microstructures assigned to the ?₁ (CaHf₄O₉) and ?₂ (Ca₆Hf₁₉O₄₄) phases. Dynamical effects on the electric field gradient reveal the existence of oxygen vacancies movements in the solid solution. The thermal behavior of the relaxation constant observed in films allowed the determination of activation energies of 0.54 eV and 0.70 eV for the 14 mol% and 20 mol% CaO doped hafnias, respectively. The influence of the microdomains and the stability of the cubic solid solution are discussed.     

Integrable semiclassical deformations of general algebraic curves and associated conservation laws

Based on the Lenard relations, we completely classify integrable deformations of general algebraic curves. We construct the general solution of the Lenard relation from the invariance condition with respect to an element of the Galois group of the curve. We give some examples and also some associated conservation laws. __________ Translated from Teoreticheskaya i Matematicheskaya Fizika, Vol. 151, No. 3, pp. 458–469, June, 2007.     

Mössbauer studies of the re-entrant spin-glass behaviour of Fe–Al alloys

Fe–Al alloys around the concentration of 30 at. % Al present re-entrant spin-glass behaviour at low temperatures. This behaviour is not completely understood and Mössbauer spectroscopy, combined with other experimental techniques, is useful to describe and explain this behaviour. Results show that the Mössbauer spectra coincide with the magnetic behaviour showed in literature and they can be explained as a magnetic cluster system whose magnetic clusters are getting smaller when the temperature is decreasing. When the temperature is reaching to the spin-glass transition at 92 K the spins in the paramagnetic matrix are moving slower and below this transition the spins are completely frozen.     

A real time method for surface cleanliness measurement

The measurement of surface cleanliness is a significant problem in many industrial and technological processes. Existing methods are based on laboratory procedures, that are not performed in real time, can not be automated, and usually are restricted to a small portion of the sample. In this study we describe a new method for real time measurement of the amount of surface dirt or contamination deposited on a surface. It relies on the ablation of the surface dirt film by means of a short laser pulse, and the subsequent measurement of the emitted sound. The intensity of the sound is proportional to the amount of surface dirt and provides a direct measurement of the cleanliness of the surface. We also developed a reference sample for calibration, based on a uniform distribution of dots printed on white paper. The density and the dot size can be easily modified providing a homogeneous, uniform and reproducible standard for the measurement. Based on this method, we designed, developed and patented the first industrial instrument for on-line determination of the degree of cleanliness of manufactured cold rolled steel plate bobbins. PACS 79.20.D; 81.70.C; 42.62.     

Advances in constant-velocity Mössbauer instrumentation

A prototype of a programmable constant-velocity scaler is presented. This instrument allows the acquisition of partial Mössbauer spectra in selected energy regions using standard drivers and transducers. It can be fully operated by a remote application, thus data acquisition can be automated. The instrument consists of a programmable counter and a constant-velocity reference. The reference waveform generator is amplitude modulated with 13-bit resolution, and is programmable in a wide range of frequencies and waveforms in order to optimize the performance of the transducer. The counter is compatible with most standard SCA, and is configured as a rate-meter that provides counts per selectable time slice at the programmed velocity. As a demonstration of the instrument applications, a partial Mössbauer spectrum of a natural iron foil was taken. Only positive energies were studied in 512 channels, accumulating 20 s per channel. A line width of 0.20 mm/s was achieved, performing with an efficiency of 80%.     

TDPAC study in ZnTiF6·6H2O between room temperature and 1273 K

Using the time differential perturbed angular correlation technique, the hyperfine interactions as titanium sites in ZnTiF6·6H₂O and its decomposition products were determined between room temperature (300 K) and 1273 K. The different steps in the decomposition pattern were identified and a simple model is given for it.     

Young's inequality in trace-class operators

 If a and b are trace-class operators, and if u is a partial isometry, then , where ∥⋅∥₁ denotes the norm in the trace class. The present paper characterises the cases of equality in this Young inequality, and the characterisation is examined in the context of both the operator and the Hilbert–Schmidt forms of Young's inequality. Received: 20 December 2001 / Revised version: 11 July 2002 / Published online: 10 February 2003 Mathematics Subject Classification (2000): 47A63, 15A60