DUAL RECIPROCITY HYBRID BOUNDARY NODE METHOD FOR THREE-DIMENSIONAL ELASTICITY WITH BODY FORCE

Combining Dual Reciprocity Method （DRM） with Hybrid Boundary Node Method （HBNM）, the Dual Reciprocity Hybrid Boundary Node Method （DRHBNM） is developed for three-dimensional linear elasticity problems with body force. This method can be used to solve the elasticity problems with body force without domain integral, which is inevitable by HBNM. To demonstrate the versatility and the fast convergence of this method, some numerical examples of 3-D elasticity problems with body forces are examined. The computational results show that the present method is effective and can be widely applied in solving practical engineering problems.     

Axisymmetric frictionless contact of functionally graded materials

The main interest of this study is a new method to solve the axisymmetric frictionless contact problem of functionally graded materials (FGMs). Based on the fact that an arbitrary curve can be approached by a series of continuous but piecewise linear curves, the FGM is divided into a series of sub-layers with shear modulus varying linearly in each sub-layer and continuous at the sub-interfaces. With this model, the axisymmetric frictionless contact problem of a functionally graded coated half-space is investigated. By using the transfer matrix method and Hankel integral transform technique, the problem is reduced to a Cauchy singular integral equation. The contact pressure, contact region and indentation are calculated for various indenters by solving the equations numerically. An erratum to this article can be found at     

镧掺杂水滑石材料的热分解过程研究

采用共沉淀法制备了系列La掺杂改性的含Cu类水滑石,高温焙烧得到其衍生混合氧化物材料,并用XRD,TG-DSC,FT-IR等对材料进行表征.结果表明,前驱物XRD图谱呈典型的水滑石衍射特征且颗粒结晶良好;经800℃焙烧后,掺杂La2O3含量为5.1%的样品仅有Mg1-xFexO晶相出现,说明La的掺杂提高了材料的高温稳定性,混合氧化物中的Cu离子呈高分散状态.     

Terahertz wave tomographic imaging with a Fresnel lens

We demonstrate three-dimensional tomographic imaging using a Fresnel lens with broadband terahertzpulses.Objects at various locations along the beam propagation path are uniquely imaged on the sameimaging plane using a Fresnel lens with different frequencies of the imaging beam.This procedure allowsthe reconstruction of an object's tomographic contrast image by assembling the frequency-dependentimages.     

Existence of two‐dimensional Skyrmions via the concentration‐compactness method

In this paper, we prove the existence of a unit‐charge energy minimizer in the two‐dimensional Skyrme model by the method of concentration‐compactness. © 2004 Wiley Periodicals, Inc.     

瑶药野葛花中6种无机元素的测定

用原子吸收光谱法测定野葛花原生药、野葛花汤剂中的 Ca、Mg、Cu、Zn、Fe、Mn等 6种无机元素含量。结果表明 ,原药和水煎液中 Ca、Mg含量比较丰富 ;各种元素的煎出率存在着较大的差异 ,其中 Cu、Zn、Fe的煎出率较高 ,Zn最高 ,达到了 82 .5 6 % ;Ca最低 ,为 5 .5 8%。并且将其结果与葛根的无机元素做了比较。为探讨无机元素与中药药效之间的关系提供了基础数据。     

A Mossbauer study of the magnetic coupling in iron phosphorous trisulfides

The polycrystalline sample of layered compound FePS_3 has been investigated by using M?ssbauer spectroscopy (12K to 300K), magnetic susceptibility measurements, x-ray diffraction and FTIR spectroscopy. The antiferromagnetic order exists below T_N=120.5±1K. The M?ssbauer spectra below T_N indicate that the magnetization axis is perpendicular to the layer of FePS_3, and the divalent iron cations are in their high spin configurations. By fitting the hyperfine field parameters near the Néel temperature, we obtain information on the nature of magnetic interactions in the material. The results show that the magnetic coupling can be treated by the two-dimensional Ising model, and it can be interpreted on the basis of a crystal-field effect.     

Fe-ZSM-5杂原子分子筛的合成与表征

采用静态水热法分别以正丁胺、四丙基溴化铵为模板剂合成ZSM-5分子筛及Fe-ZSM-5杂原子分子筛；利用XRD与FT-IR对其结构进行表征；考察了Mo改性后分子筛催化剂上甲烷脱氢芳构化的反应性能。结果表明，Fe部分进入了分子筛的骨架，导致分子筛的结晶度及表面酸强度的下降，使Mo／Fe-ZSM-5催化剂的反应性能较Mo／HZSM-5显著下降。     

紧急输送策略的线性规划模型

以美国南弗洛里达州递避飓风袭击为例建立了紧急输送情况下的线性规划模型。其中具体建立了以SCEPD(美国南弗洛里达州紧急情况预防部门)提出的公路反向，地区分块撤离，使用小路等三个最受人们关注的策略的模型。模型的灵敏度分析能很好地解释建立更多的临时避难所、限制车辆等策略对撤离的影响。在相近的环境下，中模型解得的结果很接近官方预测的结果，并且本的模型能对更广泛的情况进行分析．可给SCEPD提供一定参考。     

Na离子和Cl离子引起He原子直接多重电离过程的研究

利用2～8 MeV的Naq+、Clq+(q=2,3,4,5)轰击氦原子,对碰撞的直接多重电离过程进行研究.实验采用反冲离子-散射离子飞行时间符合技术,通过反冲离子飞行时间谱区分不同价态反冲离子;利用静电偏转和位置灵敏探测技术区分不同电荷态散射离子;结合CAMAC-PC多参数获取系统得到一定价态散射离子所对应的反冲离子电荷态分布谱;经分析该谱得到直接多重电离截面与直接单电离截面之比R21.讨论了R21随入射离子速度和电荷态的变化关系.