The band gap and transmission characteristics investigation of local resonant quaternary phononic crystals with periodic coating

In this article, the investigation of the Lamb wave propagation in two-dimensional phononic crystals (PCs) composed of an array of periodic coating on a thin plate is presented. Compared with the traditional PCs usually consist of cylindrical scatters with uniform coatings in their exterior structure, the newly exterior coating structures with periodic alternant arrangement of two different materials are proposed. The band structures are calculated using finite element method. We discover that a complete band gap can be exhibited at low frequency. Furthermore, for a finite PCs plate, the computed transmission and resonance spectra shown an evident resonance nature which can be directly related to formation of the low-frequency gaps. The effects of different material parameters and arrangement mode of coating on the acoustic energy transmission and attenuation are also studied. Finally, the experimental transmission spectrum of the periodic coating PCs are also presented and compared with the numerical results. This study will provide useful support to the design of tuning band gaps and isolators in the low-frequency range.     

线性分数阶强迫振动的稳态响应

利用分数阶导数算子-∞D_t~β研究线性分数阶振动系统在谐波激励下的稳态响应.采用复指数函数形式的谐波激励,利用待定函数法得到与激励同频率的稳态响应,以及幅频关系和相频关系.讨论了分数阶导数项对刚度和阻尼的影响.     

The study of phase,microstructure, and magnetocaloric properties in LaFe11.6*xSi1.4B0.1 alloys

The effect of Fe on the phase and magnetocaloric property of LaFe_11.6*xSi_1.4B_0.1 alloys with x = 1.0–1.4 have been studied. The results show that the excess of Fe will make the α-Fe phases increase, but the easy corrosion LaFeSi phase reduces in LaFe_11.6*xSi_1.4B_0.1 alloys. All LaFe_11.6*xSi_1.4B_0.1 alloys keep the first-order magnetic phase transition. The saturation magnetizations of LaFe_11.6*xSi_1.4B_0.1 alloys with x > 1 are much higher than LaFe_11.6Si_1.4B_0.1 alloy under 2T magnetic field. This results in the maximum isothermal magnetic entropy changes, and the relative cooling power of LaFe_11.6*xSi_1.4B_0.1 alloys is bigger than for LaFe_11.6Si_1.4B_0.1 alloys.     

Crystal Structure Investigations of Inclusion Complexes Between β-cyclodextrin and Alkyl(aqua)cobaloximes (Alkyl=Butyl,Hexyl and Cyclohexyl)

The crystal and molecular structures of alkylcobaloxime/ g -cyclodextrin ( g -CD) inclusion complexes: butyl(aqua)cobaloxime/ g -CD ( 1 ). hexyl(aqua)cobaloxime/ g -CD ( 2 ) and cyclohexyl(aqua)cobaloxime/ g -CD ( 3 ) were determined by X-ray diffraction analyses. Crystal data for 1 14H 2 O: P 2 1 2 1 2 1 , a =15.1335(3), b =18.9630(2), c =28.1545(5) Å, Z =4; 2 12H 2 O: P 2 1 2 1 2 1 , a =15.1135(4), b =19.1477(5), c =28.2715(7) Å, Z =4; 3 10H 2 O: P 2 1 2 1 2 1 , a =15.6898(2), b =16.9094(2), c =28.9762(2) Å, Z =4. The structural and conformational comparisons for the three g -CD inclusion complexes with their guest molecules as well as other CD inclusion analogs are discussed.     

两个2,4-二羟基苯甲醛缩甘氨酸配合物的合成、结构及其对醇的选择性氧化催化

合成和表征了2个2,4-二羟基苯甲醛缩甘氨酸(H₃L)席夫碱配合物[Cu(Py)₂(HL)] (1)和[Zn(Py)₃(HL)]·2Py(Py=吡啶) (2),并通过X射线单晶衍射分析确定了其结构.配合物1通过分子间的O-H…O氢键形成了一维链状结构,配合物2通过分子间的O-H…O和C-H…O氢键形成了二维网状结构.重要的是,配合物1在醇的选择性氧化反应中显示出了良好的催化效率(转化率高达94.8%,选择性高达98.3%).     

微波水热法制备CdS单分散纳米球及其形貌控制

采用微波水热法,以醋酸镉(Cd(CH3COO)2.2H2O)为镉源,硫脲(CS(NH2)2)为硫源,制备出了具有单分散球形形貌的CdS纳米晶。应用X射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)、能量色散谱仪(EDS)、高分辨透射电子显微镜(HR-TEM)、紫外可见吸收光谱(UV-Vis)等测试手段对样品的物相、形貌、元素组分及吸光性能进行了表征,并以罗丹明B溶液的降解脱色反应来考察了其的光催化活性。结果表明:随着S/Cd物质的量比(nS/nCd)逐渐增大,产物会出现由刺球链状向分散球形过渡的规律性变化。在一定的nS/nCd比的条件下可以合成出大小均匀、分散性较好的六方相CdS纳米球。样品对可见光有较强吸收,存在着一定的红移现象。在可见光照射下,硫化镉单分散纳米球具有更高的光催化活性。     

烷氧基菲咯啉设计合成及其氮磷杂配铜光敏剂的光解水制氢性能

以功能化氮配体为导向,以4,7-二苯基-1,10-菲咯啉为原料,经季铵化、氧化、卤化和醚化合成了一类新型的2,9-二烷氧基-4,7-二苯基-1,10-菲咯啉配体5a~5e。再以Xantphos为膦配体,通过原位配位方法合成一系列氮磷杂配铜光敏剂（CuPS A~H）,在均相光解水制氢体系中研究其光敏活性。制氢结果表明,以2,9-二乙氧基为较佳取代基,CuPS D的催化产氢总转换数（TON）可达270。在光电物理性能分析中,发现这类杂配铜配合物都有一个相似的氧化还原电位（E^oxd=-0.8 V,E^red=-1.2 V）。具有乙氧取代基的铜配合物CuPS D相对于其他取代基的铜基配合物,荧光最弱,表明乙氧基有助于提高荧光淬灭效率,增强铜光敏剂的光化学转换能力。     

反应修饰剂ZnSO4和预处理对苯选择加氢制环己烯Ru-Zn催化剂性能的影响

共沉淀法制备了Ru-Zn催化剂,考察了反应修饰剂ZnSO₄和预处理对苯选择加氢制环己烯Ru-Zn催化剂性能的影响。结果表明,反应修饰剂ZnSO₄可以与Ru-Zn催化剂中助剂ZnO反应生成（Zn（OH）₂）₃（ZnSO₄）（H₂O）盐。随反应修饰剂ZnSO₄浓度增加,（Zn（OH）₂）₃（ZnSO₄）（H₂O）盐量的逐渐增加,Ru-Zn催化剂活性逐渐降低,环己烯选择性逐渐升高。因为（Zn（OH）₂）₃（ZnSO₄）（H₂O）盐中的Zn²⁺可以使Ru变为有利环己烯生成的缺电子的Ru^δ+物种,而且还可以占据不适宜环己烯生成的强Ru活性位。但当反应修饰剂ZnSO₄浓度高于0.41 mol·L^-1后,继续增加ZnSO₄浓度,由于Zn²⁺水解浆液酸性太强,可以溶解部分（Zn（OH）₂）₃（ZnSO₄）（H₂O）盐,Ru-Zn催化剂活性升高,环己烯选择性降低。但环己烯选择性却略微降低,这是由于ZnSO₄溶液中大量的Zn²⁺可以与生成的环己烯形成配合物,稳定生成的环己烯,抑制生成的环己烯再吸附到催化剂表面并加氢生成环己烷。在ZnSO₄最佳浓度0.61 mol·L^-1下对Ru-Zn催化剂预处理15 h,Ru-Zn催化剂中助剂ZnO可以与ZnSO₄完全反应生成（Zn（OH）₂）₃（ZnSO₄）（H₂O）盐,在该催化剂上25 min苯转化68.2%时环己烯选择性和收率分别为80.2%和54.7%。而且该催化剂具有良好的稳定性和重复使用性能。     

富锂层状正极材料Li2Mn1-xTixO3的合成及电化学性能

应用简单的高温固相烧结法合成了Ti掺杂改性的Li₂MnO₃材料。电子扫描显微镜、X射线衍射以及X射线光电子能谱分析表明Ti元素取代Mn离子掺入到Li₂MnO₃晶格中,且掺杂能有效地抑制一次颗粒的团聚。电化学阻抗和恒流充放电测试结果表明,在2.0~4.6 V的电压窗口下,掺杂改性的样品Li₂Mn_0.9Ti_0.03O₃的首圈放电比容量达到209 mAh·g^-1,库仑效率为99.5%,循环40圈后容量保持率为94%;当电流密度增大到400 mA·g^-1时,掺杂改性的样品仍然可以放出120 mAh·g^-1比容量,远高于同等电流密度下未掺杂的Li₂MnO₃原粉的比容量（52 mAh·g^-1）。Ti掺杂可有效地改善Li₂MnO₃的循环稳定性和倍率性能,有利于促进该材料的商业化应用。