自集成透镜InGaAsP／InPDHLED及其离子束铣技术

本文报道在国内首次采用离子束铣技术研制自集成透镜InGaAsP/InP DH LED的实验结果。采用烘烤正性光致抗蚀剂来形成球状掩膜适合于离子束铣,且重复性很好。为了获得光洁的刻蚀表面,刻蚀条件均已最优化。     

用激光感生荧光法测量亚稳态原子寿命

本文用激光感生荧光法(LIF)分析了Gd原子亚稳态能级215cm~(-1),533cm~(-1),999cm~(-1)在原子束中的速度分布。由原子束轴线上两不同点上的亚稳态原子速度分布的变化得到了亚稳态原子的寿命。理论分析和实验结果表明这是一种简单、灵敏并且有效的亚稳态原子寿命测量方法。     

微量低电离电位的添加物对XeCl准分子激光输出的影响

本文报道在XeCl准分子激光器中添加微量的氯苯(C_6H_5Cl)或四氯化碳(CCl_4),使激光输出能量提高约16％。     

光纤环形外腔半导体激光器频偏特性研究

本文给出了在环形光纤外腔光反馈之下半导体激光器频偏特性的小信号分析理论.分析表明,尤其在千兆赫以下的调制频段中,耦合腔相移、内外腔光耦合强度及内外腔光场相位失谐对频偏功率比均有显著影响.可望用作强度调制直接检测高速率、长距离光纤通信系统中的光源.     

光声光谱法研究光学薄膜的吸收特性

本文以“一维热流活塞模型”为基础,推导出薄膜光声表达式,光声信号的幅值正比于吸收率.测量了透明基底上光学薄膜的光声吸收谱,实验结果与理论一致.尤其是测量弱吸收薄膜的吸收谱时,具有较高的灵敏度和实用性.     

金属表面在反射方向产生光学二次谐波的研究(Ⅰ)

用Rudnick和Stern引入的唯象参数“a”和“b”来描述表面电流,本文推导了金属表面在反射方向产生的光学二次谐波的表达式.由此证明了:从谐波信号随入射光偏振态的变化可以直接得到关于参数“a”的信息.和过去的实验相比,这种方法能更加精确、可靠地测定“a”的数值.     

超高真空中银表面垂直谐波电流的实验测量

在超高真空的条件下,测量了清洁、自由银表面产生的光学二次谐波随基波电矢量与入射面之间夹角(?)的变化,从而通过理论公式,求得由Rudnick和Stern引入的,用于衡量垂直面电流密度的唯象参数a的值,在入射基频光波长为1.064μm时,被测定为-4.0±0.8.     

PHASE INVERSION AND ITS MECHANICAL MODEL STUDIES FOR THE TWO-PHASE POLYMER BLEND SYSTEMS (Ⅱ)——DYNAMIC VISCOELASTIC RESPONSE

The dynamic viscoelastic response of the two-phase polymer blend systems shows the characteristics of the thermorheologically complex materials. In this paper theoretical equations for describing the dynamic viscoelastic response of such polymer blend systems have been established by means of the mechanical modeling technique. The dynamic viscoelastic response of the blend systems at any blend composition can be predicted theoretically by using the equations established, provided that the dynamic viscoelastic response of the two pure components and the mechanical model parameters are known in advance. Thus, we provide an effective method for studying the dynamic mechanical properties and the molecular relaxation characteristics of the two-phase polymer blend systems.     

COORDINATION COPOLYMERIZATION OF STYRENE WITH MALEIC ANHYDRIDE BY RARE-EARTH COORDINATION CATALYSTS

The study on coordination copolymerization of styrene (S) with maleic anhydride (MA) by rare-earth coordination catalysts, NdL_3-Al(i-Bu)_3, has been successfully carried out for the first time. Some features, kinetic behavior, and mechanism of the SMA copolymerization by Nd(naph)_3-Al(i-Bu)_3 system are described and discussed. The copolymex of styrenemaleic anhydride prepared by the NdL_3-Al(i-Bu)_3 systems in benzene at 50℃ is an alternating-rich white powder having high number-average molecular weight of 6—8.5×10~5. The overall activation energy for the polymerization was found to be 10.5KJ/mol. The polymerization was not suppressed by addition of hydroquinone. The catalytic activity of various ligands in NdL_3 for the copolymerization decreases in the following order: Nd (naph)_3>Nd-(P_(507))_3～NdCl_3-6H_2O>Nd(P_(204))_3>Nd(acac)_3. 3H_2O. The experimental results are explained based on a mechanism to be the coordination-type copolymerization in terms of the participation of a monomer-monomer c     

RECOGNITION SEQUENCE SPECIFICITY OF SIGNAL PEPTIDASE I AND THE ROLE OF SIGNAL PEPTIDE IN SECRETION OF PROTEIN IN Bacillus subtilis

By recombinant DNA technology, the N-terminal of the β-protein encoding region of plasmid pUBHO is fused with the structure gene of α-amylase from Bacillus licheniformis. This gene fusion is called βAmy. It is able to transcribe and translate in phase. Protein fusion can be secreted into the medium mediated by β-signal peptide. The efficiency of secretion is about 10% of the synthesized pre-α-amylase. By comparing the secretion capacities and analysing the restriction sites on β-Amy genes and the molecular weights of the mature α-amylase secreted by B. subtilis harbouring different plasmids, it is indicated in vivo that the recognition and cleavage sequence for signal peptidase I of B. subtilis is Ala-Ala-Ala Ala. The results also indicate that the secretion of the α-amylase in B. subtilis is in accordance with the post-translational transportation mode.