A kinetic method for <Emphasis Type="Italic">para</Emphasis>-nitrophenol determination based on its inhibitory effect on the catalatic reaction of catalase

The inhibitory effect of para-nitrophenol on the catalytic reaction of catalase was investigated. Michaelis-Menten kinetic parameters were determined from Lineweaver-Burk plots obtained in the absence or in the presence of the inhibitor. The inhibitor pattern, revealed by the Lineweaver-Burk plots, suggested a fully mixed inhibition mechanism. Spectrophotometric monitoring of the indicator reaction: in conjunction with initial rate measurements was employed for the kinetic determination of the inhibitor. Calibration plots of initial rate vs. para-nitrophenol concentration were linear in the concentration range 0.9·10⁻⁵–2.5·10⁻⁵ mol/L and the detection limit was 3·10⁻⁶ mol/L (417 μg/L) para-nitrophenol. Interferences from other phenolic compounds like orto-cresole, meta-and orto-nitrophenol were observed.     

Reaction of porous silicon with both end-functionalized organic compounds bearing alpha-bromo and omega-carboxy groups for immobilization of biomolecules

Both end-functionalized (alpha-bromo and omega-carboxy) compounds were first tested for the radical reaction on the silicon-hydride (Si-H) terminated porous silicon (PSi) with/without the presence of diacyl peroxide initiator under microwave irradiation. Then the carboxylic acid monolayers (CAMs) assembled on PSi through the robust Si-C bonds were converted to amino-reactive linker, N-hydroxysuccinimide (NHS)-ester, terminated monolayers. And finally two proteins of bovine serum albumin (BSA) and lysozyme (Lys) were immobilized through amide bonds. The optimum PSi membrane for protein immobilization without collapse, with parameters of porous radii 4-10 nm and depth 0.2-4.6 mum, was prepared from the (100)-oriented p-type silicon wafer. The chemically converted surface products were monitored with Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscopy (FESEM).     

Reactions of substituted furo[3,2-<Emphasis Type="Italic">b</Emphasis>]pyrrole-5-carboxhydrazides and their biological activity

The reactions of substituted furo[3,2-b]pyrrole-5-carboxhydrazides 1 with 5-arylfuran-2-carboxaldehydes 2, 4,5-disubstituted furan-2-carboxaldehydes 3 and thiophene-2-carboxaldehyde 4 has been studied. The advantage of microwave irradiation on some of these reactions was reflected in the reduced reaction time and increased yields. Reactions of 1 with 4-substituted 1,3-oxazol-5(4H)-ones 11 led to diacylhydrazines 13 or to imidazole derivatives 14 depending on the temperature. 1,2,4-Triazole-3-thione 17 was synthesized by two-step reaction of 1 with phenylisothiocyanate and subsequent base-catalyzed cyclization of thiosemicarbazide 16. The effects of hydrazones 5–10 on inhibition of photosynthetic electron transport in spinach chloroplasts and chlorophyll content in the antialgal suspensions of Chlorella vulgaris were investigated.     

用CR传输线模型研究涂层/金属体系阻抗谱

根据CR传输线模型和QR电路之间的关系,建立了拟合其初值的计算方法,借助Z-View软件,可求得各元件精确值.根据电容（Ci）和电阻（Ri）随特征频率（f*）的分布,推导了元件相对增量与恒相位角元件（Q）指数参数n的关系. 结果表明, 当n小于0.5时,Ci比Ri增加得更快,从新的角度说明了n的物理意义及其和界面脱层之间的关系.作为应用实例,拟合了不同特征的电化学阻抗谱,分析了有机涂层/金属腐蚀体系阻抗变化的具体过程,区分了点蚀和脱层因素对阻抗谱的影响,从高阻抗体系同时得到了与不同空隙率有关的涂层电容和电阻值,并根据涂层体系的不均匀特征探讨了模型结构的物理意义.     

Synthesis,crystal structure and two-photon property studies on a series of complexes derived from a novel Schiff base ligand

A new Schiff base ligand derived from S-benzyldithiocarbazate and 4-[N-hydroxy ethyl-N-(methyl)amino]benzaldehyde (HL, where H is a dissociable proton) and its Ni^II, Cu^II, Zn^II and Pd^II complexes were prepared and fully characterized. The structures of HL and Ni(L)₂ were determined by X-ray diffraction analysis, which revealed that the geometry of the Ni^II ion is square-planar with two equivalent Ni=N and Ni=S bonds, and that the two neighboring molecules in two layers have weak contact. The electronic spectra and solution fluorescence of the ligand and the complexes were studied, and the quantum yields of single-photon fluorescence for the compounds were determined. The compounds possess two-photon absorption (t.p.a.) character and the t.p.a. coefficient and t.p.a. cross-section were determined by the Z-scan technique. Especially, the Zn(L)₂complex and the HL ligand exhibit intensive two-photon fluorescence (t.p.f.) at 800 nm laser pulses in the femtosecond regime.     

F-T合成Fe/Cu/K/Al2O3催化剂的结构性质、还原及碳化行为

采用连续共沉淀与喷雾干燥成型技术相结合的方法制备了微球状Fe/Cu/K/Al2O3催化剂, 结合TG、N2物理吸附、XRD、H2-TPR、CO-TPR、Mossbauer谱等表征手段, 研究焙烧温度对Fischer-Tropshc (F-T)合成铁基催化剂的结构性质、还原行为和碳化行为的影响. 结果表明, 较高的焙烧温度有利于碳酸盐的分解和结晶水的脱除, 促进了催化剂的还原. 随着焙烧温度的进一步升高, 催化剂的比表面积减小, 平均孔径增大, α-Fe2O3晶粒的粒径增大, 催化剂中金属与载体的相互作用增强, 从而削弱了CuO、K2O助剂的作用, 严重抑制了催化剂的还原和碳化.     

硫杂杯-1,3-2,4-氮杂双冠醚的合成与氨基酸配合性能

对叔丁基硫杂杯四酰肼衍生物(2)与邻苯二甲醛发生分子内1+2缩合反应, 合成了首例1,3-交替构象的硫杂杯-1,3-2,4-氮杂双冠醚(3), 产率为65%. 其结构经元素分析、质谱、核磁共振谱等表征证实. 用UV-Vis光谱法和1H NMR谱研究了化合物3与系列α-氨基酸的识别配合性能, 并计算出其配合常数. 结果表明, 主体分子3对所测试的α-氨基酸有较好的配合作用, 主客体分子形成1∶1的配合物.     

Theoretical study on the structure and property relationship of the cationic conjugated polyelectrolytes

A theoretical study using density functional theory was performed to understand the structure/property relationship of the cationic conjugated polyelectrolytes, poly[9,9-bis-(6′-N,N,N-trimethylammonium) hexyl] fluorene-alt-4,7-(2,1,3-benzothiadiazole)] (PFBT-X, where X = Br). The torsion angle between the fluorene and benzothiadiazole units in the PFBT monomer was found to substantially affect the structural and electronic properties of the cationic PFBT monomer. The changes of geometrical parameter, HOMO and LUMO energy levels, and band gap, as well as the absorption maximum are discussed in terms of the torsion in the PFBT monomer structure. For comparison, its neutral analogue, the monomer of poly(9,9-di-n-octylfluorene-alt-benzothiadiazole) (F8BT) was also studied. The length of conjugation backbone was also examined.     

Electrodeposition of nanocrystalline zinc from acidic sulfate solutions containing thiourea and benzalacetone as additives

Nanocrystalline zinc coatings were produced by pulse electrodeposition in acid sulfate bath containing thiourea and benzalacetone additives and characterized by X-ray diffraction and scanning electron microscopy techniques. The influence of benzalacetone concentration and pulse peak current density on the grain size and crystallographic orientation of zinc deposits was investigated. Zinc electrodeposited from additive-free solutions or with one of the two additives is not composed of nanosized crystals. The mixture additives of thiourea and benzalacetone give rise to the formation of particle-like nanocrystalline zinc with a (10ī1) random orientation. A change in peak current density from 2 to 1 A/cm² only increases the grain size from 60 to 62 nm.     

Energy transfer rates and impact sensitivities of two classes nitramine explosives molecules

Some explosives are stable molecules with large energy barriers to chemical reaction, and in shock or impact initiation, a sizable amount of phonon energy must be converted to the molecular internal higher vibrations by multiphonon up pumping. To investigate the relationship between impact sensitivities and energy transfer rates, the number of doorway modes of explosive molecules is estimated by a simple theory in which the rate is proportional to the number of normal mode vibrations. We evaluated frequencies of normal mode vibrations of 13 explosive molecules which are CHNO nitramine-contained and have not been analyzed previously. The number of doorway modes in the regions of 200–700 cm⁻¹ was evaluated by the direct counting method. For more clear investigation of the relationship we have classified these 13 nitramine explosive molecules, by the number of nitramine group they contained, into two groups. There are eight molecules that contained one nitramine group and five molecules that contained poly-nitramine groups. It is found that the number of doorway modes shows a linearly correlation to the impact sensitivities derived from drop hammer tests. This result is in agreement with that of several previous works. Besides, it is also noted in our study that in those nitramine explosives molecules with similar molecular structure (similar number nitramine group they contained) and similar molecular weight, the correlation between the sensitivity and the number of doorway modes is higher. We found that the vibrational frequency of ω corresponds to nitro group motions of every molecule is contributed to the number of doorway modes in the regions of 200–700 cm⁻¹.