New fabrication approach to develop a high birefringence photo-crosslinked film based on a sulfur-containing liquid crystalline molecule with large temperature dependence of birefringence

ABSTRACT

We present a new fabrication approach to achieve a high birefringence film by means of photopolymerization based on an alkylthio-containing rod-like liquid crystalline molecule exhibiting large temperature dependence of birefringence. We designed a new reactive mesogen having alkylthio linkages (BPM–S). It was found that BPM–S had a larger increment of birefringence with decreasing temperature, relative to commercially available alkoxy analog LC242. This result could be thought to be due to enhanced intermolecular attractive interaction for an alkylthio mesogen implied by the proximity of laterally neighboring molecules and cybotactic nematic tendency based on wide-angle X-ray measurement. The uniaxially-aligned photo-polymerized film for BPM–S showed higher birefringence than that for LC 242.     

Interaction of highly charged ions with carbon-based materials using Kobe EBIS

Interaction of highly charged ions (HCIs) with surfaces produce various specific phenomena as a consequence of the potential energy that HCI possesses. In the present study, we have observed photon emission, structural, magnetic, and electronic modification on various carbon-based materials such as carbon nanotube by the impact of HCIs using an electron beam ion source named Kobe EBIS installed at the Kobe University. In order to study the potential effect, HCIs of Ar^q+ (q = 6–16) with the intensity of 0.1–1 nA are projected on the surface with a constant kinetic energy (16 keV). For photon emission measurements, we observed spatial and spectral distribution of visible light emission from the surface during irradiation with HCIs. On the other hand, the structural modification of multi-walled carbon nanotubes (MWCNTs) irradiated with HCIs has been analyzed using a transmission electron microscopy and Raman spectroscopy. Irradiation effects on the resistivity of single MWCNT supported on micrometer scale bridge pattern were also measured. We have also measured magnetic structure of highly oriented pyrolytic graphite irradiated with HCIs using electron spin resonance at low temperature. At the present paper, we will review our recent experimental results on the interaction of HCI with various carbon-based materials.     

Synthesis of Anthracene Derivatives with Azaacene-Containing Iptycene Wings and the Utilization as a Dopant for Solution-Processed Organic Light-Emitting Diodes

Substituted acene derivatives are regarded as promising materials for organic electronic devices such as organic light-emitting diodes (OLEDs). In particular, anthracene derivatives are known to exhibit good fluorescence property, with the air stability and solubility in common organic solvents expected to give advantages for solution-processed device fabrication. In this study, a series of bistriisopropylsilyl(TIPS)ethynyl anthracene derivatives with azaacene-containing iptycene wings have been synthesized by using condensation reactions. Effects of size of azaacenes on optical properties and packing structures were investigated. UV/Vis absorption and fluorescence spectra indicate that the π-elongation of iptycene units has small effects on the overall π-system, which is also supported by electrochemical measurements. Secondly, single-crystal X-ray analysis implies that the molecules likely have interactions with the iptycene units of adjacent molecules, while the iptycene wings and TIPSethynyl groups can prevent the central anthracene unit from undesirable non-radiative energy loss. Finally, the most emissive derivative was used as a dopant for solution-processed OLEDs, showing obvious electroluminescence with a luminance of over 920 cd m⁻².     

Zero Temperature Limits of Gibbs States for Almost-Additive Potentials

This paper is devoted to study ergodic optimisation problems for almost-additive sequences of functions (rather than a fixed potential) defined over countable Markov shifts (that is a non-compact space). Under certain assumptions we prove that any accumulation point of a family of Gibbs equilibrium states is a maximising measure. Applications are given in the study of the joint spectral radius and to multifractal analysis of Lyapunov exponent of non-conformal maps.     

Determination of breath gas composition of lung cancer patients using gas chromatography/mass spectrometry with monolithic material sorptive extraction

A gas chromatographic–mass spectrometric method with monolithic material sorptive extraction (MMSE) pretreatment was developed to determine the breath gas composition in lung cancer patients. MonoTrap silica monolithic and hybrid adsorbent was selected as the extraction medium during MMSE, given its strong capacity to extract volatile organic compounds (VOC) from exhaled gas. Under the appropriate conditions, high extraction efficiency was achieved. Using the selected ion‐monitoring mode, the limit of detection (signal‐to‐noise ratio 3) for the benzene series was 0.012–2.172 ng L^?1. The limit of quantitation (signal‐to‐noise ratio, 10) was 0.042–7.24 ng L^?1. The linearity range of the method was 4–400 ng L^?1. Average recovery of the benzene series at lower concentrations was 65–74% (20 ng L^?1). The relative standard deviation of benzene series contents determined within the linear range of detection was <10% of the mean level determined. Our proposed method is simple, rapid and sensitive, and can be competently applied to determine the breath gas composition of lung cancer patients. Copyright © 2014 John Wiley & Sons, Ltd.     

A new periodic pattern with five‐neighbored domain packing from ABC triblock terpolymer/B homopolymer blend

Self‐assembled structures from poly(isoprene‐b‐styrene‐b‐2‐vinylpyridine)(ISP)/styrene homopolymer blend were investigated. Five terpolymers whose total molecular weight, M, is in the narrow range of 121k < M < 214k, and volume fractions of the center block polystyrenes, ?_S, are similar at around 0.55, were prepared as parent block terpolymers. Their ?_P/?_I ratios, used as an indicator of asymmetry, are varied in the range 0.32 < ?_P/?_I < 2.46. Three low‐molecular weight styrene homopolymers with molecular weights of 3k, 9k, and 12k, respectively, were mixed with those block terpolymers to produce blends with almost constant styrene content within the range 0.65 < ?_S < 0.68. Both ISP/S(3k) and ISP/S(12k) blend series show a morphological transition from tetragonally packed cylinders (TPC) to double hexagonal structure (DHS) with hexagonally arrayed polyisoprene cylinders, each surrounded by six thin cylinders as satellites. If one focuses on ISP‐III(150k)/S blends whose ?_P/?_I is 0.88, TPC for ISP‐III/S(3k) was transformed to DHS for ISP‐III/S(12k), evidently due to the molecular weight effect of the added homopolymer. Finally a new periodic pattern, having P cylinders surrounded by five I cylinders each, has been discovered from ISP‐III/S(9k) at overall composition of ?_I/?_S/?_P = 0.17/0.68/0.15 and polystyrene block/styrene homopolymer ratio of w_S(b)/w_S(h) = 1.4. This structure was confirmed to possess hexagonal symmetry with larger unit cell than regular patterns ever known by X‐ray diffraction experiment. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 907–911     

Palladium(II)‐Catalyzed Dehydroboration via Generation of Boron Enolates

The Pd^II‐catalyzed dehydroboration of boron enolates generated from ketones and 9‐iodo‐9‐borabicyclo[3.3.1]nonane was achieved, providing a synthetically versatile protocol from ketones to α,β‐unsaturated ketones. The Pd^II compound employed in this reaction worked catalytically in the presence of Cu(OAc)₂. The high trans‐selectivity of the olefinic moiety was observed. Aryl halide moieties (‐Br and ‐Cl) remained intact for this reaction in spite of the presence of a Pd species. An ester substrate could also be applied when a stoichiometric amount of Pd^II was used. The crossover reactions using boron and silyl enolates revealed that the oxidation reaction is much faster than the Saegusa‐Ito reaction.     

Single-step preparation of topological gels using vinyl-modified β-cyclodextrin as a figure-of-six cross-linker

Herein, we have proposed a single-step preparation of topological gels using vinyl-modified β-cyclodextrin (V-β-CyD) and isoprene. Copolymerization of V-β-CyD and isoprene in an aqueous solution resulted in gelation due to V-β-CyD acting as a novel type of copolymer chain cross-linker. The vinyl moiety of V-β-CyD becomes a part of the copolymer, while the β-CyD moiety of V-β-CyD simultaneously incorporates the isoprene component of the copolymer. V-β-CyD is capable of two different modes of cross-linking at each end, i.e., chemically bonding and mechanically interlocking. Due to the shape of the cross-linking point, we refer to it as figure-of-six cross-linking. Nuclear magnetic resonance analysis showed that the gel contained V-β-CyD and isoprene in an approximately 1:0.3 stoichiometry. The relatively high content of β-CyD was reflected in the character of the gel; the gel swelled in dimethylformamide which is a good solvent of β-CyD. A fluorometric analysis using 6-(p-toluidino)-2-naphthalenesulfonic acid showed that the appended β-CyD was able to accommodate guest molecules. Introduction of an additional vinyl monomer into the gel was also successful. Addition of 4-vinylphenylboronic acid to the preparation procedure yielded a sugar-responsive gel that swelled in the presence of d-fructose.     

Synthesis of (+)-altholactone, (+)-7-epi-altholactone, (−)-etharvensin,and (+)-alumheptolide-A using Pd-catalyzed carbonylation

Syntheses of (+)-altholactone isolated from Goniothalamus giganteus and its C-7 epimer (+)-7-epi-altholactone, (?)-etharvensin and (+)-alumheptolide-A were achieved. The lactone ring of these compounds was constructed using Pd-catalyzed carbonylation.