Chelate and intramolecular ion-pair formation: A guiding concept for structure/selectivity relationships in the liquid-liquid extraction of alkali and alkaline earth metal ions by anionic crown ether derivatives

Crown ether dyes with pendent anionic side-arms were synthesized for extractionspectrophotometry of alkali and alkaline earth metal ions. Dramatic changes in metal selectivity were obtained simply by changing the nature of the anionic side-arm on the same crown ether skeleton. A structure/metal selectivity relationship is discussed in detail in terms of “chelate” and “intramolecular ion-pair” formation. Small metal cations (high charge density) are preferred in the extraction by a crown ether reagent with a charge-localized anionic side-arm through the formation of a “chelate”. Large metal cations (low charge density) are preferred in the extraction by reagents with a charge-delocalized anionic side-arm through the formation of an “intramolecular ion-pair”. Steric restrictions imposed by the side-arm on the metal ion approaching the crown ether are also important factor in controlling the selectivity of these reagents.     

Difference in spin crossover pathways among saddle-shaped six-coordinated iron(III) porphyrin complexes

The electronic states of a series of saddle-shaped porphyrin complexes [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) have been examined in solution by (1)H NMR, (13)C NMR, and EPR spectroscopy and by magnetic measurements. While [Fe(OMTPP)(DMAP)(2)](+) and [Fe(TBTXP)(DMAP)(2)](+) maintain the low-spin (S = (1)/(2)) state, [Fe(OMTPP)(THF)(2)](+) and [Fe(TBTXP)(THF)(2)](+) exhibit an essentially pure intermediate-spin (S = (3)/(2)) state over a wide range of temperatures. In contrast, the Py and 4-CNPy complexes of OMTPP and TBTXP exhibit a spin transition from S = (3)/(2) to S = (1)/(2) as the temperature was decreased from 300 to 200 K. Thus, the magnetic behavior of these complexes is similar to that of [Fe(OETPP)Py(2)](+) reported in our previous paper (Ikeue, T.; Ohgo, Y.; Yamaguchi, T.; Takahashi, M.; Takeda, M.; Nakamura, M. Angew. Chem., Int. Ed. 2001, 40, 2617-2620) in the context that all these complexes exhibit a novel spin crossover phenomenon in solution. Close examination of the NMR and EPR data of [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) (L = Py, 4-CNPy) revealed, however, that these complexes adopt the less common (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature in contrast to [Fe(OETPP)Py(2)](+) which shows the common (d(xy))(2)(d(xz), d(yz))(3) electron configuration. These observations have been attributed to the flexible nature of the OMTPP and TBTXP cores as compared with that of OETPP; the relatively flexible OMTPP and TBTXP cores can ruffle the porphyrin ring and adopt the (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature. Therefore, this study reveals that the rigidity of porphyrin cores is an important factor in determining the spin crossover pathways.     

Brush‐First ROMP of poly(ethylene oxide) macromonomers of varied length: impact of polymer architecture on thermal behavior and Li+ conductivity

The properties of polymeric materials are dictated not only by their composition but also by their molecular architecture. Here, by employing brush‐first ring‐opening metathesis polymerization (ROMP), norbornene‐terminated poly(ethylene oxide) (PEO) macromonomers ( MM‐n , linear architecture), bottlebrush polymers ( Brush‐n , comb architecture), and brush‐arm star polymers ( BASP‐n , star architecture), where n indicates the average degree of polymerization (DP) of PEO, are synthesized. The impact of architecture on the thermal properties and Li⁺ conductivities for this series of PEO architectures is investigated. Notably, in polymers bearing PEO with the highest degree of polymerization, irrespective of differences in architecture and molecular weight (~100‐fold differences), electrolytes with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as an Li⁺ source exhibit normalized ionic conductivities (σ_n) within only 4.9 times difference (σ_n = 29.8 × 10^?5 S cm^?1 for MM‐45 and σ_n = 6.07 × 10^?5 S cm^?1 for BASP‐45 ) at a concentration of Li⁺ r = [Li⁺]/[EO] = 1/12 at 50 °C. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 448–455     

Cellulose Iβ investigated by IR-spectroscopy at low temperatures

Highly crystalline oriented Halocynthia roretzi cellulose Iβ films were investigated by IR-spectroscopy between ?180 and +10 °C. Changes in the IR-spectra induced by temperature were compared to published changes induced by mechanical stretching. This made it possible to conclude that frequency shifts in the O–H stretching region of the IR-spectra due to temperature were not predominantly an indirect effect of thermal expansion leading to greater O–O distances, but were due directly to the effect of temperature on the O–H···O hydrogen bonds. Temperature induced frequency shifts of C–H stretching bands were consistent with the presence of weak inter-sheet C–H···O bonds. Furthermore, no phase transition in cellulose Iβ was found between ?180 and +10 °C.     

Electrochemical Characteristics of a Triphenylamine Derivative by Microelectrode Voltammetry

With the objective of understanding the kinetic redox properties of triphenylamine derivatives in association with chemical reactions, for their future application in functional organic semiconductor devices, the electrochemical characteristics of 4‐(2,2‐diphenylethenyl)‐N,N‐bis(4‐methylphenyl)‐benzenamine (TPA) were evaluated. Based on cyclic voltammograms of TPA on Pt disk electrodes with diameters of 300 μm and 10 μm at slow and fast scan rates in an acetonitrile solution, the TPA^.+ is stable, while the TPA²⁺ is unstable. Importantly, the unstable TPA²⁺ appears to break down by a subsequent chemical reaction. A Cottrell plot analysis from chronoamperometry of a solution containing TPA reveals that both the first and second oxidations are one‐electron reactions. Concerning the stabilization mechanism of the first oxidation state of TPA, the results of molecular orbital calculations indicate that the electrons of the HOMO level are distributed in the triphenylamine group, which induces a resonance‐stabilized TPA^.+. Based on these results, TPA/TPA^.+ is suggested to have a sufficient stability for further application in organic semiconductor devices.     

The structural changes in crystalline cellulose and effects on enzymatic digestibility

The enzymatic hydrolysis of cellulose I achieves almost complete digestion when sufficient enzyme loading as much as 20 mg/g-substrate is applied. However, the yield of digestion reaches the limit when the enzyme dosage is decreased to 2 mg/g-substrate. Therefore, we have performed three pretreatments such as mercerization, dissolution into phosphoric acid and EDA treatment. Transformation into cellulose II hydrate by mercerization and dissolution into phosphoric acid were not sufficient because substrate changed to highly crystalline structure during saccharification. On the other hand, in the case of crystalline conversion of cellulose I to III_I by EDA, almost perfect digestion was achieved even in enzyme loading as small as 0.5 mg/g-substrate, furthermore, hydrolyzed residue was typical cellulose I. The structural analysis of substrate after saccharification provides an insight into relationships between cellulose crystalline property and cellulase toward better enzymatic digestion.     

Effects of silica nanoparticle addition on polymer semiconductor wettability and carrier mobility in solution‐processable organic transistors on hydrophobic substrates

The effects of the addition of silica nanoparticles (SNPs) on wettability of regioregular poly(3‐hexylthiophene) (P3HT) organic semiconductor solutions on hydrophobic substrates and the carrier mobility in organic field‐effect transistors (OFETs) made of these films are investigated. The dewetting of films made from P3HT solutions on hydrophobic substrates modified with octadecyltrichlorosilane (ODTS) is markedly suppressed after the addition of SNPs with phenyl surfactants. This enables us to fabricate continuous P3HT/SNPs films with high crystallinity by the conventional spin‐coating technique, leading to higher mobility compared with P3HT FETs fabricated on non‐modified substrates. Moreover, the addition of SNPs with larger diameters compensates for the degradation of mobility associated with the increase in the concentration of SNPs. Solution‐processed P3HT/SNPs FETs on ODTS‐modified substrates exhibit a field‐effect mobility of 1.3 × 10^?2 cm² V^?1 s^?1, which is almost comparable to that of P3HT FETs without SNPs (2.1 × 10^?2 cm² V^?1 s^?1). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 509–516