Optoelectronic and Self‐assembly Properties of Porphyrin Derivatives with Click Chemistry Modification

A series of functionalized porphyrin molecules containing electron‐rich alkynes, synthesized by means of the Sonogashira coupling reaction were further modified by reacting the ethynyl groups with click reagent through a formal [2+2] click reaction. The photophysical and electrochemical properties of the porphyrin derivatives were studied by UV/Vis spectroscopy and cyclic voltammetry. We show that the optoelectronic properties are affected by the click reagent groups and central metal ions. The functionalized porphyrin molecules show strong charge‐transfer (CT) bands in the visible region (near‐IR region) and potent redox activities. Through a phase‐exchange self‐assembly method, the highly organized morphologies were observed by scanning electron microscopy (SEM). The functionalized porphyrin molecules represent an interesting set of candidates for optoelectronic device components. The effect of the metal ions or click reagent groups on the self‐assembly properties were also studied by the UV/Vis spectroscopic titration experiments.     

高效液相色谱-串联质谱法测定比格犬血浆中的莫诺苷浓度及其药代动力学

运用高效液相色谱-串联质谱联用技术,建立了简单、快速、灵敏的比格犬灌胃莫诺苷后血药浓度的检测方法。血浆样品采用蛋白质沉淀法处理,以芍药苷作为内标,色谱柱为Inertsil ODS-SP色谱柱(50 mm×2.1 mm,5μm),流动相为水(含1 mmol/L甲酸钠)-乙腈,梯度洗脱,流速0.4 mL/min。采用电喷雾离子源(ESI),正离子多反应监测(MRM)模式。绘制血药浓度-时间曲线,并采用DAS 2.0软件计算药代动力学参数。方法学实验结果表明内源性杂质不干扰莫诺苷和内标的测定,线性范围为2~5 000μg/L(r=0.996 6),定量限为2μg/L。方法精密度、准确度、回收率和基质效应均符合生物样品测定的要求,适合比格犬血浆中莫诺苷浓度的测定,可以应用该方法进行莫诺苷的药代动力学研究。比格犬灌胃莫诺苷3个剂量(5、15、45 mg/kg)后的血药浓度-时间曲线下面积(AUC(0-∞))分别为(1 631.20±238.50)、(3 984.05±750.38)、(10 397.64±3 156.34)μg/L·h,与给药剂量之间呈现良好的线性关系。     

以三唑农药为配体的两个铜配合物的合成、晶体结构与抑菌活性(英文)

由三唑农药烯效唑和多效唑合成了2个铜配合物[CuL14Cl2](1)和[CuL24Cl2·4H2O](2)(L1=uniconazole,L2=paclobutrazol)。通过元素分析、红外光谱和X-ray单晶衍射对其结构进行了表征。结构分析表明,1属三斜晶系,P1空间群,晶胞参数为a=0.895 6(3)nm,b=1.326 7(4)nm,c=1.491 8(4)nm,α=94.828(3)°,β=97.774(3)°,γ=105.280(3)°,V=1.680 8(9)nm3。2属三斜晶系,P1空间群,晶胞参数为a=1.021 89(19)nm,b=1.329(3)nm,c=1.366 4(3)nm,α=81.564(2)°,β=79.508(2)°,γ=79.185(2)°,V=1.785 3(7)nm3。在2个配合物中,六配位的铜离子都采取扭曲的八面体配位构型,分别来自三唑配体的4个氮原子和2个氯原子配位。1和2都由分子间氢键连接成一维链结构。与相应的配体相比,1和2的抑菌活性明显增强。     

两个基于4-(1H-1,2,4-三氮唑)苯甲酸的稀土配位聚合物的合成、晶体结构及荧光性质(英文)

以4-(1H-1,2,4-三氮唑)苯甲酸为配体,采用水热法合成了2种稀土配位聚合物[Tb(tbc3)(H2O)3]n(1)和{[Nd(tbc3)(H2O)3]·H2O}n(2)(Htbc=4-(1H-1,2,4-三氮唑)苯甲酸)。运用X-射线单晶衍射法对该配位聚合物进行了结构测定,并对其进行了元素分析、红外光谱、TG及荧光光谱表征。单晶结构表明,配位聚合物1为三斜晶系,空间群P1,配位聚合物2属于单斜晶系,空间群为P21/c。配位聚合物1和2均为一维链结构,均通过非共价键作用形成三维超分子构造。     

PPDO/PLLA共混物的制备及其相容性

通过溶液共沉淀法制备了一系列不同组份比例的PPDO/PLLA共混物(Pw)。通过溶度参数、扫描电镜及差式扫描量热仪(DSC)研究了Pw的相容性。结果表明:PPDO与PLLA相容性差;Pw的脆断面扫描电镜图片显示,在不同共混比例下,PLLA在基体PPDO中成典型"海-岛"式分布,且当PLLA含量超过30%时,Pw中出现部分PLLA连续相。     

基于石墨烯和金纳米笼修饰的无标记型微囊藻毒素免疫传感器的研制

利用石墨烯及中空结构的金纳米笼构建了无标记型电化学免疫传感器,并用于微囊藻毒素的检测。利用多元醇还原法合成制备了导电性好、催化性强、生物相容性好的金纳米笼;再利用高分散的石墨烯将其固定于玻碳电极表面,进一步吸附固定微囊藻毒素抗体。在无微囊藻毒素存在时,电化学探针[Fe(CN)6]3!/4!在传感器界面上能获得较高的电流响应信号。当培育了微囊藻毒素后,抗体与微囊藻毒素形成免疫结合物,增加了电极表面的电荷密度和传质阻力,阻碍[Fe(CN)6]3!/4!扩散到电极表面,导致[Fe(CN)6]3!/4!的电流响应信号明显降低,电流减小的程度间接地与微囊藻毒素的浓度成比例,可实现对微囊藻毒素的检测。实验考察了抗原培育时间,抗体浓度等条件对该传感器响应性能的影响。结果表明,此传感器对微囊藻毒素的线性响应范围为0.05~1000μg/L,检出限为0.017μg/L,优于文献报道。此传感器操作简单,并且具有良好的稳定性,将其用于实际水样中微囊藻毒素的检测,平均加标回收率为94.1%。     

预热燃烧模式下半焦NO排放和燃尽特性实验研究

为探究更高预热温度下(1000℃)半焦预热燃烧工艺的降氮潜力,在两段电炉串联组成的沉降炉系统上考察了预热温度(600-1400℃)、燃烧温度(1200-1400℃)和过量空气系数(α=0.6-1.4)对半焦燃烧NO释放和燃尽的影响。结果表明,进一步提高预热温度(1000℃)能够同时降低NO排放和提高燃尽率,并且富燃料工况下,预热温度升高带来的NO降低幅度比贫燃料工况下降低幅度大,预热温度从800℃升高至1400℃时,NO降幅最大可达74%(α=0.6),明显高于贫燃料条件下NO降幅20.6%(α=1.4)。但是,富燃料工况下,预热温度升高带来的飞灰含碳量降幅比贫燃料工况下降低幅度小,贫燃料条件下飞灰含碳量最大降幅为26.8%(α=1.4),高于富燃料条件下降幅15.95%(α=0.6)。对于燃烧温度对半焦燃烧NO释放的影响,发现存在一临界过量空气系数α=1,当过量空气系数高于该临界值时,随燃烧温度提高,NO排放量增加,当过量空气系数低于该临界值时,随燃烧温度的提高,NO排放量减小。     

Effects of mechanical loadings on the performance of a piezoelectric hetero-junction

A fully-coupled model for a piezoelectric hetero-junction subjected to a pair of stresses is proposed by discarding the depletion layer approximation. The effect of mechanical loadings on PN junction performance is discussed in detail. Numerical examples are carried out for a p-Si/ZnO-n hetero-junction under a pair of stresses acting on the ntype ZnO portion near the PN interface, where ZnO has the piezoelectric property while Si is not. It is found that the bottom of conduction band is lowered/raised near the two loading points due to the decrease/increase in the electron potential energy there induced by a tensile-stress mode via sucking in majority-carriers from two outside regions, which implies appearance of a potential barrier and a potential well near two loading points. Furthermore, the barrier height and well depth gradually become large with increasing tensile stress such that more and more electrons/holes are inhaled in loading region from the n-/p-zone, respectively. Conversely, rising/dropping of conduction band bottom is brought out near the two loading points by a compressive-stress mode due to the increase/decrease in the potential energy of electrons by pumping out the majority-carriers from the loading region to the two outside regions. Therefore, a potential well and a potential barrier are induced near the two loading points, such that more and more electrons/holes are driven away from the loading region to the n-zone/p-zone, respectively, with the increasing compressive stress. These effects are important to tune the carrier recombination rate near the PN interface. Thus, the present study possesses great referential significance to piezotronic devices.     

一类具两条不连续相交线的平面系统的闭轨

研究了一类具两条不连续相交线的平面系统的闭轨.利用微分包含理论和点变换的方法,获得了一些有趣的结果,包括滑模解,同宿解和闭轨的存在性.同时给出了闭轨存在的必要条件.     

基于自相关函数的激光散斑统计半径的测量

为了测量激光散斑的统计半径,运用统计光学理论推导了二维近场散斑光强的归一化自相关函数,并提出了通过求解散斑图像自相关拟合函数的系数来计算激光散斑统计半径的一种测量方法,利用该测量方法编制的测量软件可以方便地计算出激光散斑的统计半径.通过对尺寸已知的模拟散斑的测量,测量结果与实际尺寸相吻合,证实了该测量方法的可行性.