Synthesis,crystal structure and two-photon property studies on a series of complexes derived from a novel Schiff base ligand

A new Schiff base ligand derived from S-benzyldithiocarbazate and 4-[N-hydroxy ethyl-N-(methyl)amino]benzaldehyde (HL, where H is a dissociable proton) and its Ni^II, Cu^II, Zn^II and Pd^II complexes were prepared and fully characterized. The structures of HL and Ni(L)₂ were determined by X-ray diffraction analysis, which revealed that the geometry of the Ni^II ion is square-planar with two equivalent Ni=N and Ni=S bonds, and that the two neighboring molecules in two layers have weak contact. The electronic spectra and solution fluorescence of the ligand and the complexes were studied, and the quantum yields of single-photon fluorescence for the compounds were determined. The compounds possess two-photon absorption (t.p.a.) character and the t.p.a. coefficient and t.p.a. cross-section were determined by the Z-scan technique. Especially, the Zn(L)₂complex and the HL ligand exhibit intensive two-photon fluorescence (t.p.f.) at 800 nm laser pulses in the femtosecond regime.     

Theoretical study on the structure and property relationship of the cationic conjugated polyelectrolytes

A theoretical study using density functional theory was performed to understand the structure/property relationship of the cationic conjugated polyelectrolytes, poly[9,9-bis-(6′-N,N,N-trimethylammonium) hexyl] fluorene-alt-4,7-(2,1,3-benzothiadiazole)] (PFBT-X, where X = Br). The torsion angle between the fluorene and benzothiadiazole units in the PFBT monomer was found to substantially affect the structural and electronic properties of the cationic PFBT monomer. The changes of geometrical parameter, HOMO and LUMO energy levels, and band gap, as well as the absorption maximum are discussed in terms of the torsion in the PFBT monomer structure. For comparison, its neutral analogue, the monomer of poly(9,9-di-n-octylfluorene-alt-benzothiadiazole) (F8BT) was also studied. The length of conjugation backbone was also examined.     

Electrodeposition of nanocrystalline zinc from acidic sulfate solutions containing thiourea and benzalacetone as additives

Nanocrystalline zinc coatings were produced by pulse electrodeposition in acid sulfate bath containing thiourea and benzalacetone additives and characterized by X-ray diffraction and scanning electron microscopy techniques. The influence of benzalacetone concentration and pulse peak current density on the grain size and crystallographic orientation of zinc deposits was investigated. Zinc electrodeposited from additive-free solutions or with one of the two additives is not composed of nanosized crystals. The mixture additives of thiourea and benzalacetone give rise to the formation of particle-like nanocrystalline zinc with a (10ī1) random orientation. A change in peak current density from 2 to 1 A/cm² only increases the grain size from 60 to 62 nm.     

Energy transfer rates and impact sensitivities of two classes nitramine explosives molecules

Some explosives are stable molecules with large energy barriers to chemical reaction, and in shock or impact initiation, a sizable amount of phonon energy must be converted to the molecular internal higher vibrations by multiphonon up pumping. To investigate the relationship between impact sensitivities and energy transfer rates, the number of doorway modes of explosive molecules is estimated by a simple theory in which the rate is proportional to the number of normal mode vibrations. We evaluated frequencies of normal mode vibrations of 13 explosive molecules which are CHNO nitramine-contained and have not been analyzed previously. The number of doorway modes in the regions of 200–700 cm⁻¹ was evaluated by the direct counting method. For more clear investigation of the relationship we have classified these 13 nitramine explosive molecules, by the number of nitramine group they contained, into two groups. There are eight molecules that contained one nitramine group and five molecules that contained poly-nitramine groups. It is found that the number of doorway modes shows a linearly correlation to the impact sensitivities derived from drop hammer tests. This result is in agreement with that of several previous works. Besides, it is also noted in our study that in those nitramine explosives molecules with similar molecular structure (similar number nitramine group they contained) and similar molecular weight, the correlation between the sensitivity and the number of doorway modes is higher. We found that the vibrational frequency of ω corresponds to nitro group motions of every molecule is contributed to the number of doorway modes in the regions of 200–700 cm⁻¹.     

Determination of cationic surfactants in water samples by their enhanced resonance light scattering with azoviolet

A simple assay of cationic surfactants in water samples was developed based on the measurements of enhanced resonance light scattering (RLS). At pH 6.09 and ionic strength 0.03 M, the interactions of azoviolet (AV) with cationic surfactants, including zephiramine (Zeph) and cetyl trimethyl ammonium bromide (CTMAB), result in enhanced RLS signals characterized by the peaks of 470.0, 485.0 and 495.0 nm. The enhanced RLS intensity is proportional to the concentration of cationic surfactant of Zeph in the range of 0.2~6.0x10(-6) M, and to that of CTMAB in the range of 0.4~4.8x10(-6 )M. The limit of determination (3 sigma) is 2.1x10(-8) M and 3.8x10(-8) M for the two surfactants, respectively. Determinations of cationic surfactants in synthetic and tap water samples were successfully made with a recovery of 90.5~108.6%.     

K-Mo基催化剂的表面酸性与其合成醇选择性

对500℃和800℃焙烧制得的氧化态K－MoO3／γ－AlO3，K－MoO3／SiO2及非负载K－Mo催化剂进行硫化后，测试其合成醇活性．结果表明500℃焙烧制得的负载型催化剂显示较高的合成低碳烃活性和较低的合成低磷醇选择性，经800℃焙烧后，合成低磷醇的选择性大幅度提高．500℃焙烧的非负载K－Mo催化剂显示较高的合成醇选择性，经800℃焙烧后，促碳醇的选择性保持不变．用氨的吸附及TPD方法测定了各样品的酸性，并与催化剂活性对照，发现催化剂酸性越强，酸量越大，则其合成醇选择性越低．催化剂上的乙醇分解实验证实，催化剂的酸量大小与它的醇分解活性成正变关系，这些结果说明催化剂酸性对其合成醇性能有直接的影响．     

Micellization and morphological characterization of Ag-micelles prepared by poly(vinyl acetate)–silver nitrate in solvent/nonsolvent system

The inducing method for preparing Ag-micelle solution with the use of mixed solvent/nonsolvent, and the morphological characterization of the generated metal–micelles were investigated and reported in this paper. In this method, an Ag containing metal chelate polymer (MCP) raw solution was preprepared by dissolving poly(vinyl acetate) (PVAc)–silver nitrate (AgNO₃) MCP in conc. formic acid, and a mixed solvent of HCOOH/H₂O with specific water composition was then added to induce the micellization of the MCP chain. The critical water concentration (CWC) that was needed for inducing the formation of the Ag-micelles, and the water concentration at which the flocculation of the Ag-micelles occurred in micellar solution, were studied by measuring the transmittance of the dilute MCP solution; the results showed that a long-lasting MCP solution with stable micelles might be prepared by using a H₂O/HCOOH solvent of specific weight ratio 1:1.2. The effect of the AgNO₃ concentration on the morphology of the Ag-micelles was also investigated by transmission electron microscopy (TEM). At AgNO₃ concentration below 0.5 wt%, the Ag-micelles displayed a variety of core-shell structure; but as the AgNO₃ concentration was increased to 1.0–2.0 wt%, micelles that had Ag-solid embedded in the micellar core were observed.     

Liquid Densities and Excess Molar Volumes for Binary Systems (Ionic Liquids + Methanol or Water) at 298.15, 303.15 and 313.15 K,and at Atmospheric Pressure

Binary excess molar volumes, V _m ^E, have been evaluated from density measurements, using a vibrating tube densimeter over the entire composition range for binary liquid mixtures of ionic liquids 1-ethyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-butyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [BMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-methyl-3-octyl-imidazolium diethyleneglycol monomethylethersulphate [MOIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+methanol and [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+water at 298.15, 303.15 and 313.15 K. The V _m ^E values were found to be negative for all systems studied. The V _m ^E results are explained in terms of intermolecular interactions and packing effects. The experimental data were fitted by the Redlich-Kister polynomial.     

Interference of Copper(II) ions with Non-covalent Interactions in Uridine or Uridine 5′-Monophosphate Systems with Adenosine,Cytidine, Thymidine and their Monophosphates in Aqueous Solution

Coordination reactions of copper(II) ions and their effect on non-covalent interactions in uridine (Urd) or uridine 5′-monophosphate (UMP) systems with nucleosides (Ado, Cyd, Thd) and nucleotides (AMP and CMP) in aqueous solutions have been studied. At high pH the effective coordination centers are deprotonated N(3) atoms from Urd and Thd, whereas at low pH, the N(3) atoms of pyrimidine nucleosides are blocked for coordination and the metallation sites are endocyclic nitrogen atoms from Ado, Cyd, AMP and CMP. Moreover, at low pH, the main reaction center in nucleotide solutions is the phosphate group. The NMR study has proven the occurrence of non-covalent ion-dipole interactions and stacking interactions in the systems considered. Introduction of a copper ion in the majority of systems causes the disappearance of weak interactions between ligands. The structures of the complexes in solution have been inferred from the equilibrium study: an analysis of the pH range of their occurrence with respect to the pH range of deprotonation of particular groups in the compounds studied, using Vis, EPR and ¹³C as well as ³¹P NMR spectral analysis.     

Fast Marching Method for Calculating Reactive Trajectories for Chemical Reactions

We present a method for computing classical Newtonian trajectories that minimize the path length or transit time from reactant to product. Our approach is based on a generalization of the fast-marching method, which allows us to construct the solution of the Hamilton-Jacobi equation for the action that optimizes the desired quantity. The resulting “reactive paths” can be interpreted as reaction coordinates but, unlike more conventional choices, they contain dynamical information about the chemical system of interest.