NiCF/ABS复合材料的制备及电磁屏蔽效能研究

探讨了碳纤维(CF)表面镍金属的化学镀工艺,制备了镀镍碳纤维(NiCF),采用密炼工艺制备了ABS基体复合材料,研究了CF和NiCF含量对复合材料的导电性能及电磁屏蔽效能的影响。结果表明:采用化学镀的方法在碳纤维表面镀覆了金属镍,所形成的镀层均匀致密;镀覆时间为5min时,镀镍后的碳纤维电阻率降低两个数量级;复合材料电阻率随CF、NiCF含量的增加而逐渐减小;复合材料电磁屏蔽效能随CF、NiCF含量的增加而逐渐增加,当NiCF含量为25%(wt)(约13.3vol%)时,电磁屏蔽效能最高可达51dB。     

Continuous Detection of pH‐responsive Drug Delivery System in Cells in situ by Confocal Laser Scanning Microscopy

Mesoporous silica nanoparticles (MSN) were coated by pH‐responsive polymer chitosan‐poly (methacrylic acid) (CS‐PMAA). This nano drug delivery system showed good application prospects and the polymer‐coated microspheres were promising site‐specific anticancer drug delivery carriers in biomedical field. A continuous detection of pH‐responsive drug delivery system in cells in situ, utilizing MSN/CS‐PMAA composite microspheres, was proposed. Two kinds of different cell lines, tumor cell line (Hela) and normal somatic cells (293T), were used to investigate the behaviours of the drug loaded system in the cells. Conclusions could be drawn from the fluorescent images obtained by confocal laser scanning microscopy (CLSM), modified drug‐loaded microspheres (MSN/CS‐PMAA) were ingested into cells more easily, the uptake of DOX@FITC‐MSN/CS‐PMAA by HeLa/293T cells were performed at pH 7.4/pH 6.8, DOX was released during the ingestion process, fluorescence intensity decreased with time because of efflux transport and photo‐bleaching. Fluoresence detection by flow cytometry was performed as comparison. The continuous fluorescent observation in situ could be widely used in the pH‐responsive releasing process of drug delivery system in the cells.     

超声波辐照和臭氧氧化协同降解废水中的结晶紫

采用超声波辐照、臭氧氧化以及超声波辐照-臭氧氧化降解废水中的结晶紫;考察了废水初始pH、超声波功率和频率、氧气流量、反应温度等因素对降解效率的影响.结果表明:超声波和臭氧对结晶紫的降解具有协同作用;当废水溶液初始质量浓度为200mg.L-1、pH为10.0时,控制超声波功率和频率分别为100 W和30kHz,氧气流量为0.4L.min-1,反应温度为25℃,反应时间为90 min,则总有机碳(TOC)的去除率可达89.2%,相应的一级反应速率常数为2.38×10-2min-1.     

大豆油煎炸过程理化指标与LF-NMR弛豫特性的相关性研究

在对大豆油无料/薯条煎炸过程[温度:(180±5)℃,持续36 h]中的酸价(AV)、粘度(V)、吸光值(A)及总极性化合物(TPC)含量等及低场核磁共振(LF-NMR)弛豫特性(峰起始时间T21、T22、T23、相应的峰面积比例S21、S22、S23、单组份弛豫时间T2W)变化规律研究的基础上,利用多元回归分析建立了理化指标与其LF-NMR检测结果的相关性模型,并进行验证。结果表明:大豆油的酸价、TPC含量及S21峰面积均随煎炸时间的延长而线性增大,T21、T22峰起始时间及T2W则随煎炸时间的延长而线性减小(r2>0.90),粘度、吸光值随煎炸时间的延长逐渐增加并符合二项式关系(r2>0.90),而T23峰起始时间及S22、S23与煎炸时间之间无明显规律性变化。煎炸薯条后,油样的酸价、粘度、TPC含量、吸光值及S21均较无料煎炸显著增大(P<0.05),而T21、T22峰起始时间及T2W显著缩短。多元回归分析表明,酸价及TPC含量与T2W、T21,粘度与T2W,吸光值与S21间均可建立良好的相关性模型(R2>0.93)。模型验证合理可靠,可通过油样的LF-NMR检测结果有效预测其理化指标的变化。     

Influence of insertion of a noble gas atom on halogen bonding in H2O···XCCNgF and H3N···XCCNgF (X = Cl and Br; Ng = Ar, Kr, and Xe) complexes

The H₂O···XCCNgF and H₃N···XCCNgF (X = Cl and Br; Ng = Ar, Kr, and Xe) complexes have been studied with quantum chemical calculations at the MP2/aug-cc-pVTZ level. The results show that the inserted noble gas atom has an enhancing effect on the strength of halogen bond, and this enhancement is weakened with the increase of noble gas atomic number. The methyl and Li substituents in the electron donor strengthen the halogen bond. The interaction energy increases from ?3.75 kcal/mol in H₃N–BrCCF complex to ?9.66 kcal/mol in H₂LiN–BrCCArF complex. These complexes have been analyzed with atoms in molecules, natural bond orbital, molecular electrostatic potentials, and energy decomposition calculations.     

Total synthesis of (+)-valienamine and (−)-1-epi-valienamine via a highly diastereoselective allylic amination of cyclic polybenzyl ether using chlorosulfonyl isocyanate

The total synthesis of (+)-valienamine and (−)-1-epi-valienamine was concisely accomplished from readily available d-glucose via a highly diastereoselective amination of chiral benzylic ether using chlorosulfonyl isocyanate, intramolecular olefin metathesis, and diastereoselective reduction of cyclic enone using l-Selectride as the key steps.     

Trigoxyphins O–T,six new heterodimers from Trigonostemon xyphophylloides

Phytochemical study of the twigs of Trigonostemon xyphophylloides led to the isolation of six new heterodimers, trigoxyphins O (1) and R–T (4–6) comprising of two different degraded diterpenoids, and trigoxyphins P (2) and Q (3) comprising a degraded diterpenoid and a phenylpropanoid, together with a known homodimer, neoboutomannin (7). The structures and relative configurations were elucidated on the basis of extensive spectroscopic analysis, including 1D and 2D NMR experiments. Compounds 1–6 were evaluated for their cytotoxicity against four human tumour cell lines by MTT assay.     

Synthesis of monodisperse oligocarbazoles-functionalized anthracenes with intense blue-emitting

New well-defined monodisperse oligocarbazoles-functionalized anthracenes An-OCZn (n = 1, 2, 3) have been synthesized through Suzuki cross-coupling reaction of the brominated oligocarbazoles and 9,10-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)anthracene. They show good solubility in organic solvents, including dichloromethane, chloroform, toluene, ethyl acetate, and tetrahydrofuran. It should be noted that, in the case of An-OCZn, the formation of the excimer based on anthracene unit is suppressed completely due to the introduction of oligocarbazoles in 9,10-position of anthracene so that an intense blue-emitting has been afforded. In addition, the obtained An-OCZn exhibit good electrochemical and thermal stabilities. Thus, the oligocarbazoles-functionalized anthracenes can be a class of promising candidates for novel blue-emitting materials employed in OLEDs or related devices.     

Adsorption Mechanism of Comb Polymer Dispersants at the Cement/Water Interface

Comb polymers are commonly used as dispersants to stabilize highly concentrated cement suspensions. The effectiveness of such polymeric additives to stabilize these suspensions is determined to a large extent by the amount adsorbed. In this study we investigated the adsorption characteristics of various comb dispersant containing different graft densities on surfaces of cement particle. The effect of inorganic salts on their adsorption was also examined in order to elucidate their adsorption mechanism. The results show that the adsorption of comb polymer dispersants on cement surface conforms approximately to Langmuir's adsorption isotherm and the characteristic plateau A _s and adsorption free energy ΔG_ads are largely dependent on the anionic group content of the comb polymers. The A _s and ΔG_ads increase with increasing anionic group content. This information suggests that the adsorption of comb polymers on cement surfaces is dominated by electrostatic interaction between COO-groups on the comb polymers and the positive surface of the cement. This conclusion is supported by effects of inorganics such as calcium and sulfate ions, and diffuse reflectance FTIR spectroscopy. The implication of results for tuning polymers for the required performance in cement manufacture should be noted.