Hydrophobic interaction chromatography of proteins: Studies of unfolding upon adsorption by isothermal titration calorimetry

Heat of adsorption is an excellent measure for adsorption strength and, therefore, very useful to study the influence of salt and temperature in hydrophobic interaction chromatography. The adsorption of bovine serum albumin and β‐lactoglobulin to Toyopearl Butyl‐650 M was studied with isothermal titration calorimetry to follow the unfolding of proteins on hydrophobic surfaces. Isothermal titration calorimetry is established as an experimental method to track conformational changes of proteins on stationary phases. Experiments were carried out at two different salt concentrations and five different temperatures. Protein unfolding, as indicated by large changes of molar enthalpy of adsorption Δh_ads, was observed to be dependent on temperature and salt concentration. Δh_ads were significantly higher for bovine serum albumin and ranged from 578 (288 K) to 811 (308 K) kJ/mol for 1.2 mol/kg ammonium sulfate. Δh_ads for β‐lactoglobulin ranged from 129 kJ/mol (288 K) to 186 kJ/mol (308 K). For both proteins, Δh_ads increased with increasing temperature. The influence of salt concentration on Δh_ads was also more pronounced for bovine serum albumin than for β‐lactoglobulin. The comparison of retention analysis evaluated by the van't Hoff algorithm shows that beyond adsorption other processes occur simultaneously. Further interpretation such as unfolding upon adsorption needs other in situ techniques.     

Dispersion mechanisms of comb‐type superplasticizers containing grafted poly(ethylene oxide) chains

This paper discusses the influence of graft chain length and dosage of comb‐type superplasticizers on adsorption and dispersion mechanisms, and their subsequent effect on the fluidity of concentrated limestone suspensions. Contrary to the results obtained from interparticle potential calculations, the fluidity of concentrated suspension is improved by the use of comb‐type polymers having shorter grafted chain length. The dispersion mechanism of comb‐type polymers in a concentrated suspension is evaluated from the perspective of molecular structure, the amount of adsorbed polymer, and the amount of entrapped water in the clusters of CaCO₃ particles. Furthermore, the addition of certain soluble salts, which can effect the concentration of Ca²⁺ in liquid phase of CaCO₃ suspensions, has been observed to decrease the adsorption of comb‐type polymers on CaCO₃. Thus, the polymer adsorption process on solid surfaces can be selectively influenced by certain types of ions.     

Hydrophobic interaction chromatography of proteins: Thermodynamic analysis of conformational changes

For BSA and β-lactoglobulin adsorption to hydrophobic interaction chromatography (HIC) stationary phases leads to conformational changes. In order to study the enthalpy (ΔH_ads), entropy (ΔS_ads), free energy (ΔG_ads) and heat capacity (Δc_p,ads) changes associated with adsorption we evaluated chromatographic data by the non-linear van’t Hoff model. Additionally, we performed isothermal titration calorimetry (ITC) experiments. van’t Hoff analysis revealed that a temperature raise from 278 to 308 K increasingly favoured adsorption seen by a decrease of ΔG_ads from −12.9 to −20.5 kJ/mol for BSA and from −6.6 to −13.2 kJ/mol for β-lactoglobulin. Δc_p,ads values were positive at 1.2 m (NH₄)₂SO₄ and negative at 0.7 m (NH₄)₂SO₄. Positive Δc_p,ads values imply hydration of apolar groups and protein unfolding. These results further corroborate conformational changes upon adsorption and their dependence on mobile phase (NH₄)₂SO₄ concentration. ITC measurements showed that ΔH_ads is dependent on surface coverage already at very low loadings. Discrepancies between ΔH_ads determined by van’t Hoff analysis and ITC were observed. We explain this with protein conformational changes upon adsorption which are not accounted for by van’t Hoff analysis.     

Inhibition Effect of N-(Pyridin-2-yl-Carbamothioyl) Benzamide on the Corrosion of C-Steel in Sulfuric Acid Solutions

N-(Pyridin-2-yl-carbamothioyl)benzamide (PCMB) was newly synthesized and tested as a corrosion inhibitor for C-steel in 0.5 M H₂SO₄ using chemical and electrochemical techniques. Polarization measurements showed that the synthesized compound acted as a mixed inhibitor. The inhibition efficiencies obtained from the different methods were in good agreement. The inhibitive action of this compound is discussed in terms of blocking the electrode surface by adsorption of the inhibitor according to the Langmuir isotherm. The effect of temperature on the corrosion behavior in the absence and presence of 2.5 × 10^?5 M of PCMB was studied (283–308 K). The associated activation energies (E _a) and the thermodynamic parameters (ΔH*, ΔS*, K _ads, ΔG°_ads) for the adsorption process were determined. The ΔG°_ads value is ?36.55 kJ/mol, which indicated that the adsorption mechanism of PCMB on C-steel in 0.5 M H₂SO₄ solution was combined between physisorption and chemisorption processes.     

Electrochemical redox pattern and allied interactive behaviour of FAD on a ruthenium-modified glassy carbon electrode surface

The redox and interactive behaviour of flavin adenine dinucleotide (FAD) with a ruthenium (Ru)-modified glassy carbon electrode (GCE) was investigated. The electron-transfer kinetics on the Ru-modified GCE gives an apparent electron-transfer coefficient, α _app of 0.56, and an apparent heterogeneous electron transfer rate constant, k _app of 2.32?s^?1, respectively. The cyclic voltammetry (CV) complemented by alternating cyclic voltammetry (ACV) shows reduction of FAD to be a quasi-reversible reaction involving FAD adsorption. The adsorption of FAD on the Ru-modified GCE fits a Langmuir adsorption isotherm. The large apparent negative Gibbs energy of adsorption ΔG _ads (?38.2?kJ?mol^?1) of FAD onto the Ru-modified GCE confirmed a strong chemical adsorption of FAD on the surface. The deposited Ru islands block surface sites for FAD adsorption and the electron-transfer communication between FAD and the electrode surface does not significantly improve with a deposited Ru monolayer.     

Synthesis of OMS Materials and Investigation of Their Acceptor–Donor Characteristics

Three ordered mesoporous siliceous (OMS) materials known as MCM41s—unmodified MCM-41C16 (“C16”), and two MCM41s with different surface functionalities: MCM-41C16-SH (“C16-SH”) and MCM-41C16-NH₂ (“C16-NH₂”)—were synthesized and studied by inverse gas chromatography in order to determine their acceptor–donor properties. The specific retention volumes of nonpolar and polar probes that were chromatographed on these ordered mesoporous silica adsorbents were evaluated under infinite dilution conditions. Two methods were employed to calculate the standard free energy of adsorption, ΔG _ads, of each chromatographed probe on the basis its specific retention volume. These ΔG _ads values were then employed to estimate the van der Waals contribution and the specific contribution of the free surface energy for each MCM41. DN values (donor numbers, based on the Gutmann scale) and AN* values (acceptor numbers, based on the Riddle–Fowkes scale) were employed to determine the values of parameters that characterize the ability of the MCM41s to act as electron acceptors (parameter: K _A) and donors (parameter: K _D). Considering the different compositions of the probes, each of which has different acceptor–donor properties, a new chromatographic test to supplement the Grob test is suggested.

     

DFT,AIM, and NBO study of the interaction of simple and sulfur-doped graphenes with molecular halogens,CH3OH,CH3SH,H2O,and H2S

Graphene is an important material in adsorption processes because of its high surface. In this work, the interactions between graphene (G), S-doped graphene (SG), and 2S-doped graphene (2SG) with eight small molecules including molecular halogens, CH₃OH, CH₃SH, H₂O, and H₂S were studied using density functional theory calculations. The adsorption energies showed that the SG was the best adsorbent, fluorine was the best adsorbate, and all molecular halogens were adsorbed on graphenes better than the other molecules. Most adsorption processes in the gas phase were exothermic with small positive ΔG _ads. Moreover, the solvent effect on the adsorption process was examined and all ΔH _ads and ΔG _ads values for adsorption processes tended to be more negative in all solvents. Therefore, most adsorption processes in the solvents were thermodynamically favorable. The second order perturbation energies obtained from NBO calculations confirmed that the interactions between molecular halogens and our molecules had more strength than those of other molecules. The Laplacian of ρ values obtained from the AIM calculations indicated that the type of interaction in all our complexes was one of closed shell interaction. The MO results and DOS plots also revealed that sulfur doping could increase the conductivity of graphene and this conductivity was enhanced more when they interacted with molecular halogens.     

Physicochemical Properties and Surface Tension Prediction of Mixed Surfactant Systems: Triton X‐100 with Dodecylpyridinium Bromide and Triton X‐100 with Sodium Dodecylsulfonate

Dependences of the surface tension of aqueous solutions of ionic (dodecylpyridinium bromide, sodium dodecylsulfonate) and nonionic (Triton X‐100) surfactants and their mixtures on total surfactant concentration and solution composition were studied, and the surface tension of the mixed systems were predicted using different Miller's model. It was found that how to select the model for calculation of ω is corresponding to the degree of the deviation from the ideality during the adsorption of mixed surfactants. The compositions of micelles and adsorption layers at air‐solution interface as well as parameters (β^m, β^ads) of headgroup‐headgroup interaction between the molecules of ionic and nonionic surfactants were calculated based on Rubingh model. The parameters (B₁) of chain‐chain interaction between the molecules of ionic and nonionic surfactants were calculated based on Maeda model. The free energy of micellization calculated from the phase separation model (ΔG ₂ ^m ), and by Maeda's method (ΔG ₁ ^m ) agree reasonably well at high content of nonionic surfactant. The excess free energy ΔG _ads ^E and ΔG _m ^E (except α=0.4) for TX‐100/SDSn system are more negative than that TX‐100/DDPB system. These can be probably explained with the EO groups of TX‐100 surfactant carrying partial positive charge.     

Pyridine adsorption on small Nin‐cluster (n = 2,3,4): A study of geometry and electronic structure

Adsorption of pyridine on Ni_n‐clusters (with n = 2,3,4) is studied by quantum chemical calculations at B3LYP/LANL2DZ and B3LYP/6‐311G^** levels. First, Ni_n‐clusters are investigated for accessible structure and electronic states. The lowest electronic state with four unpaired electrons is predicted for Ni₄‐cluster based on geometry and electronic structure, showing that the cluster stability nicely depends on number of unpaired electrons. Correction for basis set superposition error of metal‐metal bond is appreciable and has increasing effect on cluster binding energy. Next, adsorption of pyridine in planar and vertical adsorption modes is investigated on rhombus Ni₄‐cluster. The vertical mode is found (at B3LYP/6‐311G^** level) as the most favorable adsorption mode. Adsorption energy (ΔE_ads) depends on cluster size; adsorption on Ni₄‐cluster is most favorable with ΔE_ads = ?207.33 kJ/mol. The natural bond orbital analysis reveals the charge transfer in adsorbate/metal‐cluster. Results of investigations for the Ni₂‐ and Ni₃‐cluster are also presented. © 2012 Wiley Periodicals, Inc.     

Octadecyltrichlorosilane adsorption kinetics on Si(100)/SiO2 surface: contact angle,AFM, FTIR and XPS analysis

Octadecyltrichlorosilane (OTS) adsorption kinetics on Si(100)/SiO₂ surface has been studied as a function of concentration by sequential and nonsequential dipping techniques. The contact angle technique is used to evaluate growth kinetics and thermal stability and to determine critical surface tension of the OTS layer. Atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy and X‐ray photoelectron spectroscopy (XPS) are used to confirm OTS adsorption. Langmuir isotherms are employed to analyze the kinetics data to obtain adsorption and desorption rate constants (k_a & k_d) as well as Gibbs free energy, (ΔG_ads). These parameters, k_a, k_d and ΔG_ads(y) are found to depend exponentially (y = y₀ + A.exp(?x/t)) on the OTS concentration (x). The OTS layers are found to be thermally stable up to a temperature of 230 °C and the critical surface tension obtained from the Zisman plot is found to be ～19.8 dynes/cm. OTS monolayer coverage obtained by AFM measurement agrees quite closely with that obtained from contact angle measurements. FTIR and XPS results confirm OTS adsorption. Copyright © 2006 John Wiley & Sons, Ltd.     

Adsorption behavior of water soluble polymers with lower critical solution temperature

The adsorption behavior of hydroxylpropyl cellulose (HPC), ethyl hydroxylethyl cellulose (EHEC) and poly-vinylalcohol (PVA) polymers, which have a lower critical solution temperature (LCST), have been studied in comparison with the behavior of hydroxylethyl cellulose (HEC) with no LCST. The saturated amount of adsorption (A _s ) for the polymers with LCST depended significantly on the adsorption temperature and theA _s , e. g., for HPC obtained at the LCST, the amount was 1.5 times as large as the value at room temperature. The highA _s values obtained at the LCST were maintained over a long period at room temperature, and the dense adsorption layer formed on the latex particles at the LCST showed a strong protective action against flocculation. Furthermore, the effect of the surface nature of the adsorbent on the polymer adsorption at the LCST has been investigated using six kinds of synthetic latices with different surface natures. It was found that the hydrophobic interaction between the polymer and the adsorbent plays an important role in inducing the adsorption, and the trend of increasing the hydrophilic character of the latex surface prevents the formation of the adsorption layer of the polymer.     

A study of the surface analysis of some water‐soluble polymers by inverse gas chromatography

The surface characterization of 2‐(dimethylamino)ethylmethacrylate (DMA) and 2‐(N‐morpholino)ethylmethacrylate (MEMA) homopolymers and DMA–MEMA diblock copolymer was studied using inverse‐gas chromatography (IGC). The analyzed surface properties of (co)polymers were the dispersive component of the surface energy ( ) and the acid–base characters of (co)polymer surfaces. The specific free energy (ΔG^sp), enthalpy (ΔH^sp), and entropy (ΔS^sp) of adsorption of polar probes on (co)polymers were calculated. The values of ΔH^sp were correlated with both the donor and the modified acceptor numbers (AN) of the probes to quantify the acidic K_A and the basic K_D parameters of (co)polymer surfaces. The values obtained for the K_A and K_D parameters indicated basic characters for the surface of (co)polymers. The dispersive component values of the surface energy and the acid–base surface parameters of the DMA–MEMA diblock copolymer surface were found to be between those homopolymers as expected. Copyright © 2008 John Wiley & Sons, Ltd.     

Kinetics and thermodynamics of anionic polymerization of 2-methoxy-2-oxo-1,3,2-dioxaphosphorinane

Kinetic activation parameters and thermodynamic functions describing the reversible anionic polymerization of 2-methoxy-2-oxo-1,3,2-dioxaphosphorinane (1,3-propylene methyl phosphate) were determined. Enthalpy and entropy of the anionic propagation ? depropagation equilibrium were found to be close to those found previously by the present authors for the cationic polymerization, while the activation parameters of propagation and depropagation differ substantially for both processes and reflect the differences in the involved mechanisms. Thus, data for anionic polymerization (and cationic polymerization in parentheses) are: ΔH_1s° = ?0.7 kcal/mole (?1.1); ΔS_1s° = ?2.8 cal/mole-deg (?5.4); ΔH_p^? = 26.7 kcal/mole, and ΔS_p^? = ?6.1 cal/mole-deg. The polymers obtained have low degrees of polymerization (DP _n ≤ 10) because of the extensive chain transfer, leaving cyclic end groups in macromolecules. The presence, structure and concentration of the end groups have been determined by ¹H-, ³¹P-, and ¹³C-NMR spectra.     

Corrosion inhibition of mild steel by highly stable polydentate schiff base derived from 1,3- propanediamine in aqueous acidic solution

Recently, the hydrolysis of Schiff bases under experimental conditions gives suspicion for their corrosion inhibition performance. The current study employs a stable Schiff base namely, 2,2′-{propane-1,3-diylbis[azanylylidene (E) methanylylidene]}bis(6-methoxyphenol) (LPD) as corrosion inhibitor for mild steel (MS) in 1 M HCl solution. The presence of the characteristic peak of the imine group in UV-visible spectra was taken as an indicator for LPD stability in acidic media. The inhibition action was examined using electrochemical techniques including potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) besides gravimetric measurement. The inhibition efficiency reached 95.93 % for 0.75 mM LPD after 24 h of immersion at 25 °C. This high efficiency is owing to the presence of the characteristic imine group and other heteroatoms and π- electrons of the aromatic benzene rings. The mechanism of inhibition depends on adsorption phenomena on mild steel surface which obeys Langmuir isotherm model. The calculated values of adsorption equilibrium constant (K_ads), adsorption free energy ΔG_ads, adsorption enthalpy ΔH_ads and adsorption entropy ΔS_ads indicated spontaneous exothermic adsorption process of both physical and chemical nature. By rising temperature, the inhibition efficiency of LPD was decreased. The calculated activation energy was increased as the concentration of LPD increased. LPD was considered as a mixed-type inhibitor as indicated from PDP measurements. The obtained surface morphology and composition analysis using SEM/EDS, AFM and FTIR techniques ensures the high efficiency of LPD as corrosion inhibitor.     

Synthesis of OMS Materials and Investigation of Their Acceptor–Donor Characteristics

Three ordered mesoporous siliceous (OMS) materials known as MCM41s—unmodified MCM-41C16 (“C16”), and two MCM41s with different surface functionalities: MCM-41C16-SH (“C16-SH”) and MCM-41C16-NH₂ (“C16-NH₂”)—were synthesized and studied by inverse gas chromatography in order to determine their acceptor–donor properties. The specific retention volumes of nonpolar and polar probes that were chromatographed on these ordered mesoporous silica adsorbents were evaluated under infinite dilution conditions. Two methods were employed to calculate the standard free energy of adsorption, ΔG _ads, of each chromatographed probe on the basis its specific retention volume. These ΔG _ads values were then employed to estimate the van der Waals contribution and the specific contribution of the free surface energy for each MCM41. DN values (donor numbers, based on the Gutmann scale) and AN* values (acceptor numbers, based on the Riddle–Fowkes scale) were employed to determine the values of parameters that characterize the ability of the MCM41s to act as electron acceptors (parameter: K _A) and donors (parameter: K _D). Considering the different compositions of the probes, each of which has different acceptor–donor properties, a new chromatographic test to supplement the Grob test is suggested.     

Modeling the effect of molecular architecture of comb polymers on the behavior of Al2O3 dispersions using charge/composition factors (CCF)

In this work, we study the effect of periodicity and PEO side-chain length in four PMAA-PEO (sodium salt) comb polymers with known molecular architecture on Al₂O₃ colloidal dispersions in DI water. We introduce here charge composition factors (CCF) representing charge density of the comb polymers defined as (number of charged units in a repeating unit)/(molecular weight of a repeating unit). We find, for the first time to our knowledge, that the CCF can be used along with dispersant dosage to obtain explicit functions predicting the conductivity of the dispersants in solution, the zeta potential behavior during dispersant titrations, and the isoelectric point (IEP) of the dispersions. In addition, the dosage normalized by the CCF provides a basis for comparison for the dispersants to elucidate the trends found in adsorption and potentiometric titrations. Thus, the CCF can be used as a tool for the design of improved and new comb polymer molecular architectures.     

Operational comparison of various thermodynamic treatments of organic substance adsorption at the electrode/solution interface

Three isotherms are considered: Frumkin's Bennes' and Mohilner's. The relationship between the interaction parameters in the first two and the adsorbate activity coefficient in the last is discussed. The significance of various standard states for the definition of ΔG° _ads is analysed. The operational derivation of ΔG°_ads in the three cases and the relationship between the resulting three quantities are illustrated. The isotherms have been used to describe the adsorption of 1,4-dioxane on a polarized Hg electrode. The analysis has been carried out both at constant potential and constant charge. The picture emerging in each of the three cases is discussed in the light of the results obtained in the other two. It is concluded that the three approaches give the same qualitative information about the interfacial behaviour of dioxane, especially as far as the effect of the electric field and the particle-particle lateral interaction are concerned. The usefulness of the Frumkin isotherm for analysing promptly experimental adsorption data is thus maintained. Limitations of the present approach are discussed.     

Effect of Hydrophilic/Hydrophobic Block Ratio and Temperature on the Surface and Associative Properties of Oxyethylene and Oxybutylene Diblock Copolymers in Aqueous Media

Recent development in dispersion science and technology demands block copolymers with a variable block length and composition. To highlight that purpose, the surface active, associative, colloidal, and thermodynamic behavior of three diblock copolymers having different hydrophilic to hydrophobic ratio is reported here. Using surface tension and light scattering measurements, the micellization and adsorption behavior of polyoxyethylene and polyoxybutylene diblock copolymers of the type E_mB_n have been analyzed. Critical micelle concentration (CMC) and related thermodynamic parameters like free energy (ΔG_mic), enthalpy (ΔH_mic), and entropy (ΔS_mic) of micellization were calculated from CMC value using the closed association model. Likewise, the surface active parameters, like surface excess concentration (Γ₂), area per molecule (A₂), and thermodynamic parameters such as free energy (ΔG_ads), enthalpy (ΔH_ads), and entropy (ΔS_ads) of adsorption of polymer at the air/water interface, were also calculated at various temperatures. Static and dynamic light scattering techniques were employed for the determination of the weight-average molar (M_w), association number (N_w), polymer–water interaction (A₂), and micellar size in terms of hydrodynamic radii (R_h) of copolymer micelles. The effect of block length and solution temperature on the surface and micellar properties of these copolymers was also investigated.     

Dependence of the energy of surface-active substances/metal interaction on their ionization potentials. Evaluation of hydrophilicity of metal

The function Δ(ΔG _A ⁰), which is the difference of Gibbs energies characterizing surface-active substance (surfactant, SAS) adsorption at metal/solution and air/solution surfaces, has been introduced. The equation connecting the function Δ(ΔG _A ⁰) with SAS ionization potential has been obtained using the elementary theory of donor-acceptor interactions. Published experimental data on SAS adsorption at mercury, bismuth and gold have been used for Δ(ΔG _A ⁰) calculation. The dependence of Δ(ΔG _A ⁰) on ionization potentials can be described by an equation derived in this work. It has been demonstrated that the value of the hydrophilicity of gold is much higher than the values for mercury and bismuth. The lifetime of SAS molecules at a metal surface has been estimated. The question of the possibility of theoretica l estimation of standard energies ΔG _A ⁰ characterizing SAS adsorption at a metal/solution surface has been discussed. Received: 9 December 1996 / Accepted: 13 January 1997     

The kinetics and thermodynamics of surfactants in solvent sublation

Solvent sublation has been performed on very dilute solutions of one cationic surfactant, hexadecylpyridinium chloride (HPC), and one anionic surfactant, dodecylbenzenesulfonic acid (LBS). Some thermodynamic values were obtained, e.g. molecular areas, A₀, which are 50.0 and 47.7 Ų/molecule, respectively, for HPC and LBS, and free adsorption energies, ΔG°_ads, which are –33.17 and –43.58 kJ mol^–1, respectively, for HPC and LBS. The kinetics were determined for a range of temperatures and gas flow-rates. Although the processes of solvent sublation of the two surfactants obey first-order kinetics, the respective adsorption mechanisms of HPC and LBS in the solvent sublation process were different. The pH and the presence of KCl and ethanol had no effect on the solvent sublation of LBS. The apparent active energy was calculated as 8.11 kJ mol^–1.