磷化镍晶体结构的密度泛函理论研究

运用密度泛函理论系统地研究了已知的磷化镍晶体如Ni3P、 Ni12P5、 Ni2P、 Ni5P4、 NiP、 NiP2 和 NiP3等的结构、成键以及相关的热力学稳定性，对于结构简易化合物（Ni2P和NiP3）的弹性行为进行了预测。这些数据有助于更好的理解磷化镍的催化活性。     

ANPZ的合成及ANPZ·DMSO(1∶1)晶体结构

富氮杂环化合物被认为是理想的高威力含能材料,因为这些化合物大多具有高的分子密度、低易损性和正的生成焓[1]。2,6-二氨基-3,5-二硝基吡嗪(ANPZ)是一种富氮杂环含能材料,也是合成新型高能钝感含能材料2,6-二氨基-3,5-二硝基吡嗪-1-氧化物(LLM-105)的前体。美国DuPont公司的Do     

一种新型的表面声波阻抗传感器及其在液相体系中的应用

一种新型的表面声波阻抗传感器及其在液相体系中的应用姚守拙，陈康，刘德忠，聂利华（湖南大学化学化工系，长沙，４１００８２）关键词表面声波，阻抗传感器，液相应用表面声波传感器（ＳＡＷＳ）具有较高的灵敏度和检测精度，已广泛应用于气体微量组分分析、色谱检测和...     

Piezoelectric Fiber－optic Spectroelectrochemistry──A New Technique of Spectroelectrochemistry in Combination With Piezoelectric Quartz Crystal Detection

ＰｉｅｚｏｅｌｅｃｔｒｉｃＦｉｂｅｒ－ｏｐｔｉｃＳｐｅｃｔｒｏｅｌｅｃｔｒｏｃｈｅｍｉｓｔｒｙ──ＡＮｅｗＴｅｃｈｎｉｑｕｅｏｆＳｐｅｃｔｒｏｅｌｅｃｔｒｏｃｈｅｍｉｓｔｒｙｉｎＣｏｍｂｉｎａｔｉｏｎＷｉｔｈＰｉｅｚｏｅｌｅｃｔｒｉｃＱｕａｒｔｚＣｒ...     

Piezoelectric transmission spectroelectrochemistry with a normal piezoelectric quartz crystal as an optically-transparent electrode

Piezoelectric transmission spectroelectrochemistry (PTSEC), i.e., the combination of electrochemistry and spectroelectrochemistry (SEC) with electrochemical quartz crystal microbalance (EQCM) technique is reported by using a normal piezoelectric quartz crystal (PQC) as an optically-transparent electrode (OTE). A theoretical relationship between the PQC response and the spectroelectrochemical response is derived and used to estimate the apparent molar absorptivity of the absorbing species deposited on the OTE on the PQC surface. The complex of copper with aspartic acid is used to test this new PQC-SEC technique. Results show that the combination of three such diverse techniques provides a very useful methodology for studying electrode processes and electrode surface characteristics in situ.     

Determination of Ultratrace Amounts of Copper(Ⅱ) in Water Samples by Electrothermal Atomic Absorption Spectrometry After Cloud Point Extraction

A novel approach was developed for the determination of ultratrace amounts of copper in water samples by using electrothermal atomic absorption spectrometry (ETAAS) after cloud point extraction (CPE). 1-( 2-Pyridylazo)-2-naphthol was used as the chelating reagent and Triton X-114 as the micellar-forming surfactant. CPE was conducted in a pH 8.0 medium at 40 ℃ for 10 min. After the separation of the phases by centrifugation, the surfactant-rich phase was diluted with 1 mL of a methanol solution of 0. 1 mol/L HNO3. Then 20 μL of the diluted surfactant-rich phase was injected into the graphite furnace for atomization in the absence of any matrix modifier. Various experimental conditions that affect the extraction and atomization processes were optimized. A detection limit of 5 ng/L was obtained after preconcentration. The linear dynamic range of the copper mass concentration was found to be 0-2.0ng/mL, and the relative standard deviation was found to be less than 3.1% for a sample containing 1.0 ng/mL Cu(Ⅱ). This developed method was successfully applied to the determination of ultratrace amounts of Cu in drinking water, tap water, and seawater samples.     

偏氟乙烯/三氟氯乙烯交替共聚物在TATB表面吸附的分子动力学模拟

采用COMPASS力场和NVT正则系综的动力学模拟方法, 搭建了聚合度分别为10, 50和100的偏氟乙烯(VDF)/三氟氯乙烯(CTFE)交替共聚物, 对交替共聚物在1,3,5-三氨基-2,4,6-三硝基苯(TATB)的(0,0,1)晶面上的吸附和结构进行了分子动力学(MD)模拟. 结果表明, 在300～320 K温区, 聚合度为100的VDF/CTFE交替共聚物链对TATB晶体有理想的表面活性和吸附能力, 以train型构象平铺于TATB表面. 通过对聚合度为10的交替共聚物的多链体系在TATB表面吸附的MD模拟, 表明了VDF/CTFE交替共聚物具有非凝聚吸附的高表面活性特征. 对搭建的乙酸乙酯溶剂化的聚合度为50的VDF/CTFE交替共聚物在TATB晶体表面吸附的模拟, 实验证明了溶剂小分子能够降低共聚物链的吸附能力, 且链以tail型构象吸附于TATB表面.     

离子液体相转移催化环己醇氧化制备环己酮

以不同种类的离子液体作为相转移催化剂,用双氧水作为氧化剂,Na2WO4·2H2O为催化剂,在适当的反应条件下,能有效进行相转移催化环己醇氧化制备环己酮.实验结果表明,采用酸性离子液体[C16mim]HSO4和[C14mim]HSO4相转移催化合成环己酮,可提高环己酮的产率,具有反应条件温和、操作简便、需用时间短、相转移催化剂可以循环使用等优点.在反应温度为90℃,反应时间为50min条件下,环己醇的转化率高达100%,选择性99%以上.     

[Ru(phen)2dppz]2+二聚及对DNA键合性质的影响

研究发现, [Ru(phen)2dppz]2+表现出非常强的自聚合倾向, 并显著影响DNA的键合性质, 有关方面的研究应引起科研工作者的足够重视.     

Fe3O4磁性纳米粒子的超声包金及其表征

超声条件下, 在乙醇分散的3-氨丙基三乙氧基硅烷(APTES)功能化的磁性Fe₃O₄纳米粒子和四氯合金酸的混合溶液中滴加柠檬酸钠, 成功地制备了磁性Fe₃O₄/Au复合纳米粒子. 采用X射线粉末衍射仪(XRD)、紫外吸收可见光谱(UV-Vis)、带有电子能谱仪(EDS)的扫描电子显微镜(SEM)、透射电子显微镜(TEM)、光电子能谱(XPS)、超导量子干涉仪(SQUID)等方法, 对复合粒子的形态、结构、组成以及磁学性质进行了表征. 结果表明: 在此条件下制得的复合粒子粒径在30 nm左右, 室温下磁化强度可达63 emu/g.