丙烯选择氧化铋钼铁复氧化物催化剂组成,结构及性能的研究

采用XRD、Raman、XPS及催化剂性能评价等手段,考察了Bi_3(FeO_4)(MoO_4)_2和Fe_2(MoO_4)_3分别存在及两者共存时对Bi-Mo复氧化物体系催化性能的影响.结果表明,这两种含Fe物种的存在都有助于改善Bi-Mo系复氧化物催化剂对丙烯选择氧化反应的催化性能.但两者在作用机理上有所不同.Fe_2(MoO_4)_3本身无催化活性,但在反应条件下可部分还原为FeMoO_4形成Fe~(3+)/Fe~(2+)氧化还原对;且其地结构上与α-Bi_2(MoO_4)_3相匹配,这些因素都有助于促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生,从而提高催化性能.Bi_3(FeO_4)(MoO_4)_2在反应条件下也可形成Fe~(3+)/Fe~(2+)氧化还原对,但由于其Fe~(3-)所处的化学环境与Fe_2(MoO_4)_3很不相同,且Fe的含量也不及Fe_2(MoO_4)_3,因此它在促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生等方面的性能较差,但它对提高催化剂表面的活性中心(Bi-Mo对)数目有贡献.     

Mo－Cu－S原子簇化合物［Mo_2Cu_6S_6（SCMe_3）_2（O）_

基于标题簇合物的快原子质谱研究，提出该二簇合物在质谱过程中的可能断裂途径及其簇骼转换的相关性。     

Alkylation of benzene with 1-hexene in acidic ionic liquid systems: Et3NHCl-FeCl3and Et3NHCl-AlCl3ionic liquids

Summary The alkylation of benzene with 1-hexene has been investigated in different triethylamine hydrochloride-ferric chloride (Et₃NHCl-FeCl₃) and triethylamine hydrochloride-aluminium chloride (Et₃NHCl-AlCl₃) ionic liquids. Both high catalyst activity and monoalkylation selectivity were observed for these two type of ionic liquids. Systems prepared by modification with HCl in Et₃NHCl-FeCl₃ionic liquids prove to be very suitable solvents and catalysts for the reaction. When employing Et₃NHCl-AlCl₃ionic liquids as catalysts, the reaction takes place in biphasic mode with facile catalyst separation and catalyst recycling.     

繁峙煤镜质组的生烃特征与热解产物生成动力学研究

本文利用付立叶红外光谱（ＦＴＩＲ），热解气相色谱（Ｐｙ－ＧＣ）及热解气相色谱质谱（Ｐｙ－ＧＣ－ＭＳ）联用技术等分析手段，探讨了我国山西繁峙煤镜质组的生烃特征，鉴定了如气体烃、正构脂肪烃、苯酚、单环芳烃以及甲氧基酚类等热解产物６７种化合物。用相继等温热解法一级反应动力学模型，求取了热解产物如气体组分（Ｃ１￣Ｃ６）、轻烃（Ｃ７￣Ｃ１４）、重烃（Ｃ１５￣Ｃ３０）、正构脂肪烃（ｎＣｉ）、烷基芳烃、苯酚等的     

气相色谱质谱联用仪与微机的数据传输和处理

报道了一种用于气相色谱质谱联用仪和微机之间实现数据传输和处理的方法。方法可更有效地利用质谱仪采集的数据，解决了工作站处理数据的局限性。经数据格式转换，原始数据可以在微机上实现色谱峰再现，从而为色谱条件的优化和定量数据处理创造了条件。     

A novel trilinear decomposition algorithm： Three-dimension non-negative matrix factorization

Non-negative matrix factorization(NMF)is a technique for dimensionality reduction by placing non-negativity constraints onthe matrix.Based on the PARAFAC model,NMF was extended for three-dimension data decomposition.The three-dimension non-negative matrix factorization(NMF3)algorithm,which was concise and easy to implement,was given in this paper.The NMF3algorithm implementation was based on elements but not on vectors.It could decompose a data array directly without unfolding,which was not similar to that the traditional algorithms do.It has been applied to the simulated data array decomposition andobtained reasonable results.It showed that NMF3 could be introduced for curve resolution in chemometrics.     

Thermal Behaviour and Decomposition Kinetics for Two Palladium(II) Complexes with 1-aminopyrene and its Derivative

The thermal decomposition studies for two palladium(II) complexes Pd(apyr)₂Cl₂ and Pd(pmpa)Cl₂ (apyr=1–aminopyrene and pmpa=N–(2–pyridylmethylene)–1–pyrenylamine) were carried out in pure nitrogen using TG-DTG techniques. The non-isothermal kinetic parameters for the two complexes were evaluated employing the method suggested by Málek, esták, Koga et al. Based on the above results, thermal behaviour of the complexes were carefully discussed, which showed that not only the parameters value, but also the decomposition pattern and mechanism for complex 1 are different from complex 2.This revised version was published online in November 2005 with corrections to the Cover Date.     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.