压力和温度对4-甲基二苯并噻吩和二苯并噻吩加氢脱硫反应的影响

研究了4-甲基二苯并噻吩(4-MDBT)和二苯并噻吩(DBT)在CoMo/γ-Al2O3上的加氢脱硫反应产物分布及其可能的反应网络,通过反应压力和温度对产物分布影响的研究,揭示了加氢脱硫反应的可能机理。研究发现4-MDBT在CoMo/γ-Al2O3上的加氢脱硫反应主要通过直接氢解路径和加氢路径进行,且两者反应速率相当；DBT在 CoMo/γ-Al2O3上的加氢脱硫反应主要通过直接氢解路径进行。4-MDBT分子位于4位的甲基阻碍其在催化剂表面通过硫原子的端连吸附,从而降低了其直接氢解脱硫路径的反应速率,因而也降低了其总的加氢脱硫转化率。反应压力降低,DBT和4-MDBT加氢脱硫反应中加氢路径反应速率明显下降,而其对氢解路径影响较小,但效果却与加氢路径相反,反应压力对4-MDBT转化率的影响大于DBT。反应温度对DBT和4-MDBT加氢脱硫反应中加氢路径和氢解路径都有明显影响,但是对DBT加氢脱硫反应中氢解路径的影响小于加氢路径,而对4-MDBT加氢脱硫反应中氢解路径的影响稍高于加氢路径,4-MDBT分子中甲基的供电子作用有利于相连苯环的加氢反应。     

PREPARATION AND PROPERTIES OF CLAY/POLY(N-ISOPROPYLACRYLAMIDE-co-ACRYL AMIDE)NANOCOMPOSITE HYDROGELS

Polymer hydrogels as a kind of soft materials have attracted increasing scientific and technological interest in past several decades. These materials have been applied widely in many fields [1], such as molecular filter [2,3], superabsorbent [4], and contact lenses [5] etc. However, synthetic polymeric hydrogels are seldom used as mechanical devices due to the lack of mechanical strength. Therefore, it is very imperative to improve their mechanical properties for wider use of polymeric hydrog…     

Analysis and Protection of One Thousand Hand Buddha in Dazu Stone Sculptures

The components of the rock, the pigments, the gold foils and the adhesive of One Thousand Hand Buddha in Dazu stone sculptures, Chongqing, China, have been analyzed by X-ray diffraction (XRD), X-ray fluorescence (XRF), infrared spectroscopy (IR), energy dispersive X-ray analysis (EDX) and fiber optics reflectance spectroscopy (FORS). Furthermore, the weathering and degeneration of One Thousand Hand Buddha have been discussed and the protective methods have been provided. In this work some useful information to study on conservation of stone relics is given.     

噁唑硼烷催化芳醛不对称炔基化反应的量化研究

对手性噁唑硼烷催化芳醛不对称炔基化还原反应的机理进行了量子化学半经验方法研究.研究表明,该反应是放热的，炔基转移是反应的控制步骤，炔基转移的过渡态具有扭曲的椅式结构，还原的主要产物是R-手性醇.     

PEAK IDENTIFICATION FROM INTERACTION INDEX IN REVERSED-PHASE HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY

The interaction index c which was derived from the fundamental retention equationlogk' =a + cC_B in reversed--phase high--performancc liquid chromatography (RP-HPLC) quan-titatively describes the difference in the interaction between solute--strong. solvent andsolute--weak solvent; it has shown to be a constant for a specific solute even when columnsystems with different C18 packings are used. The theoretical basis for peak identificationby using interaction index has been proposed, which was based on the a,c values on stan-dard C18 column by utilizing linear a-a plots on column pairs and the linear relationship be-tween parameters a and c for the structural related compounds. Through the establishmentof parameters a,c data based on the standard C18 column for a certain type of compounds,the retention of thesc compounds on various C18 columns can be predicted. Typical exam-ples have been given to verify the correctness of this method.     

Theoretical Study on the Isomerization Mechanism of Enol Ester from 2-Acyl-1, 3-cyclohexanediones

The present paper employed density function theory to investigate two reaction pathways for isomerization of enol ester proposed by Yang(path a) and the present authors(path a), respectively. The base catalytic effects of solvent triethylamine on these two reactions were also evaluated. It is demonstrated that path B is more preferable than path a due to low barrier height for the rate-determining step.     

烯烃歧化催化剂Bu~4N[Mo(CO)~5Cl]-RAlCl~2活性衰减原因的探讨

考察了影响Bu_4N[Mo(CO)_5Cl]-RAlCl_2烯烃歧化催化剂活性的一些因素和反应过程中的动力学行为,并着重讨论催化剂活性衰减的原因。催化剂失活主要是由于形成的金属卡宾活性物种分解所引起。最后分析了烯烃加入顺序对催化剂活性的影响。     

分子印迹技术制备石油有机硫组分固相萃取剂的研究

用分子印迹技术合成了对石油有机硫组分二苯并噻吩(Dibenzothiophene，DBT)具有高效选择性的分子模板聚合物(Molecularly Imprinted Polymer，MIP)，通过静态吸附的方法研究了不同功能单体和致孔剂及其用量对模板聚合物特异性识别能力的影响．实验表明，以4-乙烯基吡啶(4-VP)为功能单体，在甲苯溶剂中聚合得到的固相萃取剂对DBT具有较大的吸附富集能力和识别特性．其饱和吸附容量达到48．3mg／g．     

发酵液中谷氨酰胺提取新工艺

本文根据谷氨酸和谷氨酰胺的电离常数的差异，采用一种新型的离子交换工艺，通过单根阴离子交换柱，从谷氨酰胺发酵液中提取谷氨酰胺。粗晶溶解液通过阴离子交换柱后，谷氨酰胺最高收率达到83％，谷氨酸去除率90％。该法在显著提高产品收率的同时，还大大减少了酸碱用量。     

Preparation and Characterization of Microencapsulated Hexadecane Used for Thermal Energy Storage

Polyurea microcapsules about 2.5μm in diameter containing phase change material for thermal energy storage application were synthesized and characterized by interfacial polycondensation method with toluene-2,4-diisocyanate and ethylenediamine as monomers in an emulsion system. Hexadecane was used as a phase change material and OP, which is nonionic surfactant, and used as an emulsifier. The chemical structure and thermal behavior of the microcapsules were investigated by FTIR and thermal analysis respectively. The results show encapsulated hexadecane has a good potential as a solar energy storage material.