基于高斯伪谱方法的混沌系统最优控制

针对混沌系统最优控制问题,提出一种基于高斯伪谱方法的数值求解新算法. 首先在勒让德-高斯点上构造Lagrange插值多项式并近似表示混沌系统最优控制中的状态变量和控制变量;接着将连续空间的最优控制问题转化为非线性规划问题;然后通过序列二次规划（SQP）算法获得最优解;最后对三个典型混沌系统的仿真实验结果表明,新方法能有效和快速地实现混沌系统的最优控制. 关键词： 混沌系统 最优控制 高斯伪谱法 非线性规划     

基于伴随同化方法的空间飞行器轨道估计

基于空间几何原理提出了一个双星无源定位方案,方案中包括两个观测坐标系和一个基础坐标系.每个观测坐标系中分别存在一条由观测卫星发出指向目标飞行器的射线,考虑到实际观测中存在各种误差,任意两颗观测卫星对目标飞行器的定位方向一般不在同一个平面内(即为异面直线),假定两条异面直线的公垂线段的中点(相交的情况下为交点)是目标飞行器所在的位置,而公垂线段的长度表征两颗卫星的观测误差.利用空间飞行器的观测数据计算了飞行器在基础坐标系中的位置坐标并进行了误差估计.利用一个基于伴随同化方法的数值模型估计了空间飞行器主动段的轨道.正向模型用来模拟飞行器的运动过程,伴随模型用来优化参数.通过同化空间飞行器在基础坐标系下的观测数据得到了空间飞行器的轨道.设计了数值实验以检验该模型的合理性,实验结果表明了双星无源定位系统的正确性,通过同化卫星对飞行器的观测数据,该伴随同化模型可以对空间飞行器的轨道进行成功估计.     

First-principles study on the geometric and electronic structures and phase transition of PbZr1-xTixO3 solid solutions

With first-principles virtual-crystal approximation calculations, we systematically investigate the geometric and elec- tronic structures as well as the phase transition of lead zirconate titanate (PbZr1-xTixO3 or PZT) as a function of Ti content for the whole range of 0 ≤ x Ti ≤ 1. It can be found that, with the increase of the Ti content, the PbZr1-xTixO3 solid solu- tions undergo a rhombohedral-to-tetragonal phase transition, which is consistent with the experimental results. In addition, we also show the evolution in geometric and electronic structures of rhombohedral and tetragonal PbZr1-x TixO3 with the increasing content of Ti.     

Dielectric loss of half-doped manganite Lao.sCao.sMnO3＊

The dielectric loss tanfi of half-doped manganite Lao.sCao.sMnO3 is investigated using Green＇s function technique. The Lao.sCao.sMnO3 is described by the Kondo-lattice model in the double exchange limit, taking into account the Jahn- Teller distortion and the super-exchange interaction between the localized electrons. It is found that the intensity of tans decreases with increasing [e]TI, V, and U. It is also observed that the transition temperature Tp rises as l eJTI and U increase. It is worth noting that Tp remains unchanged and the strength of tans increases with increasing g. The calculated dielectric loss results are explained theoretically, and these behaviors are in qualitative agreement with the experimental results.     

Stationary Fluid Dynamic Behaviour of V-Shaped Diffuser/Nozzle Elements for Valveless Micropump

A novel type of V-shaped （isosceles triangle cross-section） diffuser/nozzle element is proposed for use for valveless micropump. Stationary fluid dynamic behaviour of V-shaped diffuser/nozzle elements in a valveless micropump is investigated by experiment and simulation. Both the results agree well with each other when the Reynolds number is higher than 100 and the pressure loss coefficient ratio of micropump nearly always keeps a constant. For a single V-shaped diffuser, the general trends of variation of pressure loss coefficient with opening angle and Reynolds number are opposite in small and large angles. Compared with conical and flat-wall diffusers, V-shaped diffuser shows the smallest pressure loss when the Reynolds number is 200.     

Nitrogen Dioxide Sensing Properties and Mechanism of Copper Phthalocyanine Film

Copper phthalocyanine film, a p-type organic semiconductor, is synthesized by vacuum sublimation and its surface morphology is characterized by SEM. A silicon-based copper phthalocyanine film gas sensor for NO2 detection is fabricated by MEMS technology. The results show that the resistance and sensitivity of copper phthalocyanine film decrease obviously as the NO2 concentration increases from Oppm to lOOppm. However, the sensitivity nearly keeps a constant of O. 158 between 30 ppm and 70 ppm. The best working temperature of the gas sensor is 90℃ for NO2 gas concentrations of lOppm, 20ppm and 30ppm, which is much lower than that of general metal oxide gas sensor.     

新型红色发光材料La3PO7∶Eu^3＋的合成及发光性质研究

用固相法合成了La3PO7∶Eu3 ,用X射线衍射仪测定了其晶体结构,室温下用Hitachi F-4500测定了其光致发光性质。结果表明合成的La3PO7∶Eu3 属单斜相结构,Eu3 在单斜结构的La3PO7基质中占据非对称性格位。在254 nm光激发下,La3PO7∶Eu3 发射出较强的红光,表明Eu3 的5D0→7F2跃迁强度远大于5D0→7F1的跃迁强度,其色坐标和Y2O3∶Eu3 的色坐标位置相近。另外,还研究了Eu3 在体相La3PO7材料中的猝灭浓度,发现当掺杂Eu3 浓度增大到7.6 mol%时,出现浓度猝灭。     

新型红色发光材料La3PO7:Eu3+的合成及发光性质研究

用固相法合成了La3PO7:Eu3+,用X射线衍射仪测定了其晶体结构,室温下用Hitachi F-4500测定了其光致发光性质.结果表明合成的La3PO7:Eu3+属单斜相结构,Eu3+在单斜结构的La3PO7基质中占据非对称性格位.在254 nm光激发下,La3PO7:Eu3+发射出较强的红光,表明Eu3+的5D0→7F2跃迁强度远大于5D0→7F1的跃迁强度,其色坐标和Y2O3:Eu3+的色坐标位置相近.另外,还研究了Eu3+在体相La3PO7材料中的猝灭浓度,发现当掺杂Eu3+浓度增大到7.6 mol%时,出现浓度猝灭.     

Mn掺杂ZnO稀磁半导体材料的制备和磁性研究

采用共沉淀方法制备了名义组分为Zn_1-xMn_xO(x=0.001,0.005,0.007,0.01)的Mn掺杂的ZnO基稀磁半导体材料,并研究了在大气气氛下经过不同温度退火后样品的结构和磁性的变化.结果表明：样品在600℃的大气条件下退火后, 仍为单一的六方纤锌矿结构的ZnO颗粒材料;当样品经过800℃退火后,Mn掺杂量为0.007,0.01的样品中除了ZnO纤锌矿结构外还观察到ZnMnO₃第二相的存在.磁性测量表明,大气条件下600℃退火后的样品,呈现出室温铁磁性;而800℃退火后的样品,其室温铁磁性显著减弱,并表现为明显的顺磁性.结合对样品的光致发光谱的分析,认为合成样品的室温铁磁性是由于Mn离子对ZnO中的Zn离子的替代形成的. 关键词： ZnO 掺杂 稀磁半导体 铁磁性     

全合成法光纤预制棒制造研究

介绍了一种全新的全合成法G.655和G.656光纤制造工艺,详细分析了该工艺中芯层折射率差Δ0、芯层厚度a、第二包层的折射率差Δ2、第二包层的厚度c2等结构参量与光纤光学性能的关系.结果表明,制造该两种光纤时,Δ0应在0.012 0～0.015 5之间,Δ2应在0.014 0～0.023 0之间,a应在2.8～3.2 μm之间,c2应在满足截止波长的要求下尽可能小.