直拉法LiNbO3单晶体中的旋转生长条纹

使晶体转轴与温场对称轴不一致,则在晶体弯月面内会产生随时间变化的正弦波式的温度分布。建立了晶体转速、温度起伏、表面生长条纹和内部生长条纹间的一一对应关系,从而在晶体中有意识地引入了其周期可以任意调节的旋转生长条纹。 关键词：     

纳米硅薄膜的光致发光特性

用等离子体增强化学汽相淀积法系统制备了发光纳米硅(nc-Si∶H)薄膜.讨论了晶粒尺寸和表面结构对光致发光(PL)谱的影响.用量子限制-发光中心模型解释了nc-Si∶H的PL.研究了PL谱的温度特性.温度从10K上升到250K，PL峰值红移了54meV，且PL强度衰减了两个数量级. 关键词：     

双侧截断数据的中位数回归(英文)

在很多实际应用中,个体寿命时间可能被同时左截断与右截断.本文在左右截断变量都能被观察到的假设下,提出了一种半参数推断方法,来分析协变量对于相应寿命时间或其某种变换的中位数的影响,并讨论了所得估计量的渐近性质.此外,本文还提供了一种基于经验似然的回归参数推断方法,并讨论了将这些方法推广到经典双侧截断数据的可能性.一些模拟计算被用于展示这些方法的有效性.     

指令性抽样下总体均值和方差的估计及其应用

指令性抽样下的样本往往不具有代表性,因此仅用它们来推断总体将是不适合的,这篇文章基于观察信息,利用概率统计方法将没有发出调查指令的样本信息补充出来,然后利用观察信息和补充信息一起来对总体进行推断.具体我们给出了总体均值和方差参数估计的迭代公式,并给出它们在经济犯罪调查和流行病调查中的应用.     

求解二次Lagrangian有限元方程的代数两水平方法

基于矩阵图集的粗化算法,构造一种新的插值算子,提出了瀑布型代数两重网格法;然后结合部分几何信息,提出了求解二次Lagrangian有限元方程的代数两水平方法.数值实验表明该算法稳健性强、计算量更少.     

太阳能热气流系统内传热与流动的实验模拟

构建了小尺寸太阳能热气流发电的实验模型,测定了系统的温度随时间和空间的分布,测定了烟囱内的速度随时间的变化关系.实验结果表明:集热棚内温度分布和季节对系统传热与流动特性的影响符合理论分析结果,而由于烟囱较薄,散热较高,在烟囱内的温度降低显著.     

Phase Transition and High Piezoactivity of Sr Doped Lead-Free （Na0.53K0.422Li0.048） （Nb0.89Sb0.06Wa0.05）O3 Ceramics

Lead-free piezoelectric ceramics （Na0.53K0.422Li0.048 ） （Nb0.89Sb0.06 Ta0.05 ）03 （NKLNST） ＋ x tool SrCO3 are prepared by conventional solid state sintering method. The specimens with pure perovskite structure show tetragonal phase at x 〈 0.01, and become pseudo-cubic phase at x 〉 0.02. A lattice parameter discontinuity is found in the specimens with 0.004 〈 x 〈 0.0075, along with a great improvement in piezoactivity. The 0.004 mol SrCO3 added NKLNST ceramics possesses outstanding performances of kp = 0.53, kt = 0.26, and d33=309 pC/N. Moreover, the Sr^2＋ modification inhibits the gra/n growth, decreases the Curie temperature, and induces a diffuse phase transition.     

Effects of Li Substitution and Sintering Temperature on Properties of Bi0.5（Na,K）0.5TiO3 Lead-Free Piezoelectric Ceramics

Bi0.5 （Na0.72K0.28- x Lix ）0.5 TiO3 （BNKLT- 100x） lead-free piezoelectric ceramics are synthesized by conventional solid state sintering techniques. The dielectric and piezoelectric properties of the BNKLT-100x ceramics as a function of Li content are systematically investigated. It is found that not only Li content but also the sintering temperature has a strong effect on the piezoelectric properties of BNKLT. The piezoelectric constant d33 Of BNKLT varies from 120 to 252pC/N in the Li content range from 0.03 to 0.16. In the sintering temperature range from 1080 to 1130℃, the d33 value of BNKLT-6 changes from 200pC/N to 252pC/N. The BNKLT-6 sample sintered at 1100℃ has the highest piezoelectric constant d33 of 252pC/N, with the electromechanical coupling factors kp of 0.32 and kt of 0.44.     

Effect of Aspect Ratio Distribution on Localized Surface Plasmon Resonance Extinction Spectrum of Gold Nanorods

Gold nanorods with different aspect ratios are prepared in micells using a seeded growth method. Their extinction spectra are observed with an UV-visible spectrophotometer and analysed theoretically. It is known that there are two plasmon resonance peaks for gold nanorod corresponding to transverse and longitudinal plasmon resonance respectively. Moreover, the longitudinal plasmon resonance peak shifts to long wavelength when we increase the aspect ratio determined from TEM. Especially, we model the extinction spectrum using Gans' theory and compare it with our experimental result. Considering the aspect radios distribution of gold nanorods, it is found that longitudinal plasmon resonance peak will be wider than the nanorods with single aspect ratio, which is consistent with our experimental result. In addition, the effect of dielectric constant of surrounding medium is considered.     

Photonic Crystal Fibre SERS Sensors Based on Silver Nanoparticle Colloid

A photonic crystal fibre （PCF） surface enhanced Raman scattering （SERS） sensor is developed based on silver nanoparticle colloid. Analyte solution and silver nanoparticles are injected into the air holes of PCF by a simple modified syringe to overcome mass-transport constraints, allowing more silver nanoparticles involved in SERS activity. This sensor offers significant benefit over the conventional SERS sensor with high flexibility, easy manufacture. We demonstrate the detection of 4-mercaptobenzoic acid （4-MBA ） molecules with the injecting way and the common dipping measurement. The injecting way shows obviously better results than the dipping one. Theoretical analysis indicates that this PCF SERS substrate offers enhancement of about 7 orders of magnitude in SERS active area.