Study on the nanoscale current of ZnO film by photoassisted peak force tunnel atomic force: A novel technique for UV detection

ZnO film-based ultraviolet (UV) detector was fabricated by photoassisted peak force tunnel atomic force (PFTUNA) on fluorine tin oxide (FTO) substrate. The PFTUNA current in dark and in UV light was ~0.1 and 2.0 nA, respectively. The UV sensitivity (photocurrent/dark current) is more than 20. The response time and the recovery time are ~0.12 and 0.32 s, respectively. The UV sensing mechanism is that the holes will transport to the ZnO surface to capture the adsorbed oxygen ions to weaken the depletion layer under UV illumination. The PFTUNA current between the tip and the ZnO film is consistent with the Richardson–Schottky (RS) thermionic emission model.     

酰胺连接的共价有机骨架的制备及其在水中高效光催化性能

光催化是将太阳能转换为化学能的绿色可持续发展途径,有望解决日益严重的能源危机和环境污染问题.在光催化过程中,半导体材料作为光催化剂,负责可见光的捕获、光生载流子的生成和传输以及氧化还原反应,在整个光催化系统中起着决定性的作用.共价有机骨架材料(COFs)是一类新兴的半导体光催化剂,已被证明在可见光诱导的水分解、二氧化碳还原、有机转化反应和水中污染物降解方面具有应用前景.然而,大部分COFs是通过可逆反应构筑的,在水中及苛刻条件下的稳定性差.因此,提升基于COFs的光催化剂在水相中的光催化活性和循环稳定性仍然面临巨大挑战.本文提出了一种新策略,即通过实现多重协同效应,设计和开发2D-COFs作为在水中的高效非均相光催化剂.通过后合成策略将亚胺键连接的2D-COFs氧化,制备了两种具有丰富三嗪结构单元的以酰胺键连接的2D-COFs(命名为COF-JLU18和COF-JLU19).结果表明,COF-JLU18和COF-JLU19具有高比表面积和孔体积,其比表面积分别为1156和541 m2/g;COF-JLU19具有比相似拓扑结构的亚胺COF-JLU17更好的水蒸气吸附性能.此外,COF-JLU19表现出了极高的化学稳定性,在水中、盐酸和氢氧化钠溶液中浸泡两天,其结构和结晶性均没有发生明显变化.由此可见,酰胺键不仅可以增加材料骨架的亲水性,还能够提高COFs对水的稳定性.本文制备的酰胺键连接的COF-JLU19材料,在光降解罗丹明B水溶液(RhB)反应中可以获得高达0.69 min?1的光降解速率常数,活性明显优于其他光催化剂,如C3N4等.COF-JLU19具有较好的催化活性主要归因于以下两方面:一方面,良好的亲水性和固有孔隙率之间的协同效应可以增强COFs在水中对染料的吸附能力,使其光催化活性得到有效提升;另一方面,高的结晶度和优秀的稳定性使酰胺键连接的COFs在多相光催化中实现稳定循环利用.为了扩展COFs的应用前景,本文还制备了一种基于酰胺键连接COFs的静电纺丝膜,在以太阳光为光源的光降解罗丹明B水溶液实验中表现出较高的光催化活性和重复使用性.综上,本文提出的多重协同效应为基于COFs的高效光催化剂的设计提供了一种有效策略.     

可见光响应的CO3(PO4)2/Ag3PO4纳米复合光催化剂的制备及表征

采用简单的化学偏聚法合成出Ag3PO4纳米颗粒、磷酸钴(Co3(PO4)2,CoP)纳米片以及它们两者的纳米复合结构(CoP/Ag3PO4),同时还比较了它们的可见光催化活性.采用场发射扫描电镜(FESEM)、X射线衍射(XRD)、紫外-可见(UV-Vis)吸收光谱以及光致发光谱等手段对其形貌、结构、光学以及可见光催化性能等进行表征.结果表明,CoP/Ag3PO4复合纳米结构的可见光降解甲基橙(MO)的速率和循环稳定性均明显优于其它两种物质.这表明CoP应该起着共催化剂的作用,它能够抑制光生电子与空穴之间的复合,并且提供大量高活性的光生空穴.此外,我们还发现CoP/Ag3PO4降解另一种阳离子型染料——罗丹明B(RhB)的能力则远不如纯Ag3PO4,这可能是与光催化剂的表面性质发生改变有关,造成更低的RhB吸附能力.本文提供了一种廉价制备高效可见光催化剂的新方法.     

Dicyclohepta[ijkl,uvwx]rubicene with Two Pentagons and Two Heptagons as a Stable and Planar Non-benzenoid Nanographene

Polycyclic aromatic hydrocarbons with hexagons/pentagons or hexagons/heptagons have been intensively investigated in recent years, but those with simultaneous presence of hexagons, pentagons and heptagons remain rare. In this paper, we report dicyclohepta[ijkl,uvwx]rubicene ( DHR ), a non-benzenoid isomer of dibenzo[bc,kl]coronene with two pentagons and two heptagons. We developed an efficient and scalable synthetic method for DHR by using Scholl reaction and dehydrogenation. Crystal structure of DHR shows that the benzenoid rings, two pentagons and two heptagons are coplanar. The bond lengths analysis and the ICSS(1)zz and LOL-π calculations indicate that the incorporation of two formal azulene moieties has an effect on the conjugated structure. The π-electrons of benzenoid and pentagon rings are more delocalized. Cyclic voltammetry studies indicate that DHR shows multiple oxidation and reduction potentials. Interestingly, DHR exhibits unusual S₀ to S₂ absorption and abnormal anti-Kasha S₂ to S₀ emission. Moreover, crystals of DHR exhibit semiconducting behaviour with hole mobility up to 0.082 cm² V⁻¹ s⁻¹.     

高平均功率固体激光及其大气传输

固体激光器是一种具有重要应用背景的高功率激光器,对包括激光波长、光束发射口径、发射功率、光束质量等在内的激光器参数的选择进行了分析,研究了大气介质的光学性质、激光大气传输效应以及激光辐射与靶目标的耦合机制与耦合效率等因素的影响.相关结果表明100 kW的固体激光器的综合效能可与2～3倍平均输出功率的DF化学激光器相当,这说明高平均功率固体激光器是一种具有潜在优势和良好发展前景的高功率激光器.     

用电子探针对广西金牙微细粒金矿金赋存状态的研究

微细粒金赋存状态的研究，对搞清此类金矿的成因，指导这类金矿的勘探、开采和选冶有着重要意义，本文报道了用电子探针对广西金牙微细粒金矿的矿石进行了观察分析，首次在金牙金矿床含金矿化物表面发现了含铂汞金矿、汞金矿、铂金太航自然金，并确定出它们的尺度。     

Development of the Technique for Fabricating Submicron Moire Gratings on Metal Materials Using Focused Ion Beam Milling

A focused gallium ion （Ga＋） beam is used to fabricate micro/submicron spacing gratings on the surface of porous NiTi shape memory alloy （SMA ）. The crossing type of gratings with double-frequency （25001/mm and 50001/mm） using the focused ion beam （FIB） milling are successfully produced in a combination mode or superposition mode. Based on the double-frequency gratings, high-quality scanning electron microscopy （SEM） Moird patterns are obtained to study the micro-scale deformation of porous NiTi SMA. The grating fabrication technique is discussed in detail. The experimental results verify the feasibility of fabricating high frequency grating on metal surface using FIB milling.     

芴2,7位取代的9,9’-二芳基螺芴类化合物的合成及性能

设计并合成了一系列以三苯胺为核,芴衍生物为外围基团的有机蓝光小分子,该合成通过Suzuki反应在9-芳基芴的2位和(或)7位引入相同或不同取代基作为模块,并利用Friedel-Crafts反应将4-甲基三苯胺与这一系列模块结合.用NMR,MS和元素分析进行结构表征.荧光测试结果表明该类化合物溶液的荧光发射波长范围在442～466 nm之间,属蓝光发射.电化学测试显示该类材料的HOMO能级位于-5.15～-5.19 eV之间.差示扫描量热仪与热重分析得出化合物的玻璃化转变温度在166℃以上,热分解温度高于398℃,表明该类材料具有良好的热稳定性.     

Propagation of elastic wave in nanoporous material with distributed cylindrical nanoholes

The effective propagation constants of plane longitudinal and shear waves in nanoporous material with random distributed parallel cylindrical nanoholes are studied. The surface elastic theory is used to consider the surface stress effects and to derive the nontraditional boundary condition on the surface of nanoholes. The plane wave expansion method is used to obtain the scattering waves from the single nanohole. The multiple scattering effects are taken into consideration by summing the scat- tered waves from all scatterers and performing the configuration averaging of random distributed scatterers. The effective propagation constants of coherent waves along with the associated dynamic effective elastic modulus are numerically evaluat- ed. The influences of surface stress are discussed based on the numerical results.