Channelled Porous TiO2 Synthesized with a Water‐in‐Oil Microemulsion

Porous titanium dioxide synthesized with a bicontinuous surfactant template is a promising method that leads to a high active surface area electrode. The template used is based on a water/isooctane/dioctyl sodium sulfosuccinate salt together with lecithin. Several parameters were varied during the synthesis to understand and optimize channel formation mechanisms. The material is patterned in stacked conical channels, widening towards the centre of the grains. The active surface area increased by 116 % when the concentration of alkoxide precursors was decreased and increased by 241 % when the template formation temperature was decreased to 10 °C. Increasing the oil phase viscosity tends to widen the pore aperture, thus decreasing the overall active surface area. Changing the phase proportions alters the microemulsion integrity and disrupts channel formation.     

Single‐Crystal‐like Nanoporous Spinel Oxides: A Strategy for Synthesis of Nanoporous Metal Oxides Utilizing Metal‐Cyanide Hybrid Coordination Polymers

Development of a new method to synthesize nanoporous metal oxides with highly crystallized frameworks is of great interest because of their wide use in practical applications. Here we demonstrate a thermal decomposition of metal‐cyanide hybrid coordination polymers (CPs) to prepare nanoporous metal oxides. During the thermal treatment, the organic units (carbon and nitrogen) are completely removed, and only metal contents are retained to prepare nanoporous metal oxides. The original nanocube shapes are well‐retained even after the thermal treatment. When both Fe and Co atoms are contained in the precursors, nanoporous Fe?Co oxide with a highly oriented crystalline framework is obtained. On the other hand, when nanoporous Co oxide and Fe oxide are obtained from Co‐ and Fe‐contacting precursors, their frameworks are amorphous and/or poorly crystallized. Single‐crystal‐like nanoporous Fe?Co oxide shows a stable magnetic property at room temperature compared to poly‐crystalline metal oxides. We further extend this concept to prepare nanoporous metal oxides with hollow interiors. Core‐shell heterostructures consisting of different metal‐cyanide hybrid CPs are prepared first. Then the cores are dissolved by chemical etching using a hydrochloric acid solution (i.e., the cores are used as sacrificial templates), leading to the formation of hollow interiors in the nanocubes. These hollow nanocubes are also successfully converted to nanoporous metal oxides with hollow interiors by thermal treatment. The present approach is entirely different from the surfactant‐templating approaches that traditionally have been utilized for the preparation of mesoporous metal oxides. We believe the present work proves a new way to synthesize nanoporous metal oxides with controlled crystalline frameworks and architectures.     

Mesoporous Silica Particles as Topologically Crosslinking Fillers for Poly(N‐isopropylacrylamide) Hydrogels

Here it is demonstrated that mesoporous silicas (MPSs) can be used as effective “topological crosslinkers” for poly(N‐isopropylacrylamide) (PNIPA) hydrogels to improve the mechanical property. Three‐dimensional bicontinuous mesporous silica is found to effectively reinforce the PNIPA hydrogels, as compared to nonporous silica and two‐dimensional hexagonally ordered mesoporous silica.     

Well‐Defined Iron Complexes as Efficient Catalysts for “Green” Atom‐Transfer Radical Polymerization of Styrene,Methyl Methacrylate,and Butyl Acrylate with Low Catalyst Loadings and Catalyst Recycling

Environmentally friendly iron(II) catalysts for atom‐transfer radical polymerization (ATRP) were synthesized by careful selection of the nitrogen substituents of N,N,N‐trialkylated‐1,4,9‐triazacyclononane (R₃TACN) ligands. Two types of structures were confirmed by crystallography: “[(R₃TACN)FeX₂]” complexes with relatively small R groups have ionic and dinuclear structures including a [(R₃TACN)Fe(μ‐X)₃Fe(R₃TACN)]⁺ moiety, whereas those with more bulky R groups are neutral and mononuclear. The twelve [(R₃TACN)FeX₂]_n complexes that were synthesized were subjected to bulk ATRP of styrene, methyl methacrylate (MMA), and butyl acrylate (BA). Among the iron complexes examined, [{(cyclopentyl)₃TACN}FeBr₂] ( 4 b ) was the best catalyst for the well‐controlled ATRP of all three monomers. This species allowed easy catalyst separation and recycling, a lowering of the catalyst concentration needed for the reaction, and the absence of additional reducing reagents. The lowest catalyst loading was accomplished in the ATRP of MMA with 4 b (59 ppm of Fe based on the charged monomer). Catalyst recycling in ATRP with low catalyst loadings was also successful. The ATRP of styrene with 4 b (117 ppm Fe atom) was followed by precipitation from methanol to give polystyrene that contained residual iron below the calculated detection limit (0.28 ppm). Mechanisms that involve equilibria between the multinuclear and mononuclear species were also examined.     

Morphological changes in the cellulose and lignin components of biomass occur at different stages during steam pretreatment

Morphological changes to the different components of lignocellulosic biomass were observed as they occurred during steam pretreatment by placing a pressure reaction cell in a neutron beam and collecting time-resolved neutron scattering data. Changes to cellulose morphology occurred mainly in the heating phase, whereas changes in lignin morphology occurred mainly in the holding and cooling phases. During the heating stage, water is irreversibly expelled from cellulose microfibrils as the elementary fibrils coalesce. During the holding phase lignin aggregates begin to appear and they increase in size most noticeably during the cooling phase. This experiment demonstrates the unique information that in situ small angle neutron scattering studies of pretreatment can provide. This approach could be useful in optimizing the heating, holding and cooling stages of pretreatments to allow the exact size and nature of lignin aggregates to be controlled in order to enhance enzyme accessibility to cellulose and therefore the efficiency of biomass conversion.     

Diversity of potential hydrogen bonds in cellulose I revealed by molecular dynamics simulation

We have performed molecular dynamics calculations using a revised version of the Gromos56A_carbo force field to understand the consequences of the different potential hydrogen bonding patterns on the structural stability and thermal behavior of the I_α and I_β forms of native cellulose. For each allomorph, we considered three patterns of hydrogen bonds: two patterns obtained from neutron diffraction data refinement and a regular mixture of the two. Upon annealing, the hydrogen bonding schemes of cellulose I_β, irrespective of the starting structure, re-arranged into the main hydrogen bond pattern experimentally observed (pattern A). On the other hand, the I_α structures, irrespective of the starting hydrogen bonding pattern, converged to a non-experimental structure where the adjacent chains are shifted along the chain direction by 0.12 nm in the hydrogen-bonded plane, and the hydroxymethyl group conformation alternates between gt and tg along the chain. The exotic structure in I_α might be a consequence of a deficiency in force field parameters and/or potential molecular arrangement in less crystalline cellulose.     

Self‐Replication and Amplification of Enantiomeric Excess of Chiral Multifunctionalized Large Molecules by Asymmetric Autocatalysis

Self‐replication of large chiral molecular architectures is one of the great challenges and interests in synthetic, systems, and prebiotic chemistry. Described herein is a new chemical system in which large chiral multifunctionalized molecules possess asymmetric autocatalytic self‐replicating and self‐improving abilities, that is, improvement of their enantioenrichment in addition to the diastereomeric ratio. The large chiral multifunctionalized molecules catalyze the production of themselves with the same structure, including the chirality of newly formed asymmetric carbon atoms, in the reaction of the corresponding achiral aldehydes and reagent. The chirality of the large multifunctionalized molecules controlled the enantioselectivity of the reaction in a highly selective manner to construct multiple asymmetric stereogenic centers in a single reaction.     

Electrical Network of Single‐Crystalline Metal Oxide Nanoclusters Wired by π‐Molecules

In a mixed‐valence polyoxometalate, electrons are usually delocalized within the cluster anion because of low level of inter‐cluster interaction. Herein, we report the structure and electrical properties of a single crystal in which mixed‐valence polyoxometalates were electrically wired by cationic π‐molecules of tetrathiafulvalene substituted with pyridinium. Electron‐transport characteristics are suggested to represent electron hopping through strong interactions between cluster and cationic π‐molecules.