水热法合成Ce0.67Zr0.33O0.2固溶体研究

采用两种不同前驱体通过水热法合成了Ce0.67Zr0.33O0.2固溶体,并通过XRD,BET,TPR等手段考察了样品的相结构,比表面及还原特性.结果表明,在180℃,12 h的水热条件下,以共沉淀产物为前驱体所制得的Ce0.67Zr0.33O0.2固溶体比表面积较高,但存在一定程度的相分离;以凝胶产物为前驱体制得的Ce0.67Zr0.33O0.2固溶体结构更完整,具有良好的还原特性及热稳定性.     

丙烯选择氧化铋钼铁复氧化物催化剂组成,结构及性能的研究

采用XRD、Raman、XPS及催化剂性能评价等手段,考察了Bi_3(FeO_4)(MoO_4)_2和Fe_2(MoO_4)_3分别存在及两者共存时对Bi-Mo复氧化物体系催化性能的影响.结果表明,这两种含Fe物种的存在都有助于改善Bi-Mo系复氧化物催化剂对丙烯选择氧化反应的催化性能.但两者在作用机理上有所不同.Fe_2(MoO_4)_3本身无催化活性,但在反应条件下可部分还原为FeMoO_4形成Fe~(3+)/Fe~(2+)氧化还原对;且其地结构上与α-Bi_2(MoO_4)_3相匹配,这些因素都有助于促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生,从而提高催化性能.Bi_3(FeO_4)(MoO_4)_2在反应条件下也可形成Fe~(3+)/Fe~(2+)氧化还原对,但由于其Fe~(3-)所处的化学环境与Fe_2(MoO_4)_3很不相同,且Fe的含量也不及Fe_2(MoO_4)_3,因此它在促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生等方面的性能较差,但它对提高催化剂表面的活性中心(Bi-Mo对)数目有贡献.     

一种新型的芳基重排反应（Ⅱ）──苯并环己酮中β－芳基的重排

报道了３－芳基四氢合萘－１－酮的烯醇硅醚在氧化碘苯－三氟化硼的协同作用下３－位芳基迁移到２－位，生成２－芳基－３－氟四氢合萘－１－酮的反应。当芳基是Ｐｈ－ｐ－Ｃｌ－Ｐｈ、ｐ－Ｍｅ－Ｐｈ和ｐ－ＭｅＯ－Ｐｈ时，收率分别为８０％、６１％、１０％和５％，并讨论了这一反应的机理。     

液相色谱手性拆分机理的热力学方法研究

手性识别是分子识别的一个重要组成部分。液相色谱手性拆分机理研究有助于色谱条件的优化和新型手性固定相的设计，也有助于理解手性识别机制。本文就线性色谱与非线性色谱条件下手性拆分过程对应热力学参数的推求方法进行了评述，阐述了相关热力学参数的涵义及其在色谱保留及手性拆分机理探讨中的应用，并展望了该领域的研究前景。     

两个含有平行交替链的新型二氰胺配位高聚物: {Mn(dmpz)[N(CN)2]2}2和{Cu(dmpz)[N(CN)2]2}2

Two new dicyanamide coordination polymers, {Mn(dmpz)[N(CN)2]2}2 (1) and {Cu(dmpz)[N(CN)2]2}2 (2)(dmpz=3,5-dimethylpyrazole), were synthesized and characterized by single crystal X-ray diffraction analysis and IR spectroscopy. In 1 and 2 the metal ions have two different coordination modes, where one is coordinated to four dicyanamide anions and two monodentate dmpz molecules to form a slightly distorted octahedral geometry, while the other adopts octahedral geometry, surrounded by four nitrile N atoms and two amide N atoms of the dicyanamide anions. Both complexes contain two alternating chains that are parallel to each other.     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

Effect of drug-loading methods on drug load, encapsulation efficiency and release properties of alginate/poly-L-arginine/chitosan ternary complex microcapsules

The drug-loaded alginate/poly-L-arginine/chitosan ternary complex microcapsules were prepared by mixing method, absorption method and the combined method of mixing and absorption, respectively. The effect of drug-loading methods on drug load, the encapsulation efficiency and the release properties of the complex microcapsules were investigated. The results showed that the absorption process is a dominating factor to greatly increase the drug load of Hb into microcapsules. Upon loading Hb into microcapsules by combined method of mixing and absorption, the drug load (19.9%) is up to the maximum value, and the encapsulation efficiency is 93.8%. Moreover, the drug release is a zero-order kinetics process for the ternary complex microcapsules made by mixing. For the complex microcapsules made by absorption, the drug release is a first-order kinetics. However, for the complex microcapsules made by combining the mixing and the absorption, the drug release obeys a first-order kinetics during the first eighteen hours, changing afterwards to a zero-order kinetics process. Effect of drug-loading methods on drug load and encapsulation efficiency of alginate/poly-L-arginine/chitosan ternary complex microcapsules.     

氧化酶及烷烃氧化

记述了氧化酶在生物催化中的应用. 较之传统的化学反应, 氧化还原生物催化反应有较好的选择性、可控性和经济性, 人们正在积极地寻找这类催化剂. 自然界中被高度还原的烃类品种丰富, 因此催化烷烃末端或近末端氧合反应的酶也相对容易找到. 很多这一类的酶生化特性已作了详细的描述, 烷烃加氧酶催化高附加值反应的潜力已得到了广泛地认可.     

不依赖于统计模型的手性毛细管电泳分离多指标同时优化

考虑到手性毛细管电泳分离机理的复杂性，提出了不依赖于统计模型的二进制编码遗传算法多目标优化策略。根据实验参数的多少及其重要性，采用均匀设计安排完成初步实验。并用Derringer功效函数作为多指标同时优化的评价指标，以取得较高的分离度和较快分离速度；通过对实验参数给予编码，转化为二进制字符串，根据得到的总功效函数值大小进行遗传算法操作，产生新的一组实验条件。重复上述过程直到得到最佳分离条件为止。此方法成功地应用于华法令对映体的毛细管电泳分离条件优化。     

ToF-SIMS analysis of surface-anchored organometallic clusters

ToF-SIMS analysis of the organometallic cluster Os₃(μ-H)(CO)₁₀(μ-SCH₂CH₂SH) chemically attached onto a silver or gold surface, and of the cluster fragment Os₃(μ-H)(CO)₁₀(μ-OSi) on a silica surface, allows for identification of the surface organometallic species, and also gives information on its reactivity.