The oxygen reduction reaction at silver electrodes in high chloride media and the implications for silver nanoparticle toxicity

The oxygen reduction reaction (ORR) at neutral pH in various aqueous chloride-containing solutions was investigated voltammetrically. In particular, the ORR was performed in high chloride containing aqueous media including authentic and synthetic seawater under oxygen saturated conditions and compared with that in aqueous nitrate and perchlorate media. The experimental voltammograms revealed a two-electron process forming hydrogen peroxide in low chloride media. In contrast, high concentration chloride solutions, including both synthetic and authentic seawater showed an increase of overpotential, accompanied by a splitting of the voltammetric peak into two one-electron features indicating the formation of superoxide in the first step and its release from the silver-solution interface. The implications for silver nanoparticle toxicology are discussed given the markedly greater toxicity of superoxide over peroxide and the high levels of chloride in biological media as well as in seawater.

Superoxide produced at silver electrode in seawater.     

Remarkably enhanced capacitance of ordered polyaniline nanowires tailored by stepwise electrochemical deposition

A stepwise deposition method was employed to create ordered polyaniline (PANI) nanowires with remarkably enhanced capacitance. Cyclic voltammetry, AC impedance, and galvanostatic charge/discharge cycling were employed to investigate the electrochemical performance of the PANI electrodes. The PANI-deposited electrode exhibits much higher capacitance than those prepared by one-step deposition method, which were mainly contributed from the unique nano structure of PANI and the increased biological, economical, and technical surface areas. The superior capacitive behaviors of the nano PANI electrodes show great potential in preparation of high efficient electrochemical capacitors or rechargeable batteries.     

Detection of environmental chemicals by SPR assay using branched cyclodextrin as sensor ligand

We obtained the association constants Ka of estrogen (E2) and environmental chemicals by the surface plasmon resonance (SPR) assay using the immobilized mono-6-O-α-maltosyl-β-CD (G₂βCD) compared with the immobilized β-CD and the immobilized estrogen receptor (ER). The association behavior of G₂βCD was shown as a ER model compound. The calibration curve was determined by the initial rate of association depending on the various concentrations, and the minimum detectable concentrations in the order of parts per billion were calculated. The SPR assay has advantages that the pre-treatment of the sample is not necessary and the immobilized ligand is stable and useful for the repeated measurement.     

Na3Fe(C2O4)3·5H2O的热解过程和FAB-MS断裂规律

以红外光谱法为主要手段，原位“跟踪”测定铁（Ⅲ）与乙二酸形成的配合物Ｎａ３Ｆｅ（Ｃ２Ｏ４）３．５Ｈ２Ｏ的热解过程，分析了气、固相热解产物。并以色谱分析、差热－热重分析和Ｘ－射线粉末衍射法定性、定量地验证其结果。测定了该配合物快原子轰击质谱，提出了断裂规律。铁的二元羧酸配合物的质谱尚属首见。     

CoMoK／γ—Al2O3水煤气变换催化剂的硫化及反硫化

以Ｈ２Ｓ和ＣＳ２作硫化剂，用ＰＰＳ和ＴＰＤＳ方法研究了水煤气变换催化剂ＣｏＭｏＫ／γ－Ａｌ２Ｏ３的硫化及反硫化过程。用Ｈ２Ｓ／Ｈ２硫化时，只发现Ｈ２Ｓ的消耗和Ｈ２Ｏ的生成，用ＣＳ２／Ｈ２硫化时，只发现Ｈ２Ｓ的消耗和Ｈ２Ｏ的生成。用ＣＳ２／Ｈ２硫化时，首先生成ＣＯ２，然后是ＣＨ４，Ｈ２Ｏ和Ｈ２Ｓ，ＴＰＧ实验表明催化剂表面上积炭，造成催化剂和活性降低，但积炭在水煤变换反应进行了逐渐除法。ＴＰＤＳ实验表     

Polymer-Titanium hybrids obtained by radical polymerization and Sol-Gel process

The possibility to prepare hybrids made by poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA) and/or poly(ethyl acrylate) (PEtA) with TiO₂ was studied. The processes of polymer formation-radical polymerization and sol-gel process for inorganic network —were achieved simultaneously. Due to a high reactivity of titanium isopropoxide (TIP) in the sol-gel process, a complexant comonomer, allyl acetoacetate (AlAcAc), was used. Covalent bonds between polymer and inorganic chains were obtained by addition of trialkoxysilane derivates with vinyl (VTES) or methacryloyl (MPTS) groups. The presence of TIP inhibits the radical polymerization of vinyl acetate (VAc). The PVAc-TiO₂ hybrids were produced by the sol-gel process of TIP in the presence of pre-obtained PVAc. Except for VTES and MPTS, trialkoxysilane derivates with methyl (MeTES), octyl (OTES) and phenyl (PTES) groups were used. The thermal stability of hybrids is strongly affected by TiO₂ presence and by the type of trialkoxysilane derivates. The thermal stability of PVAc hybrids decreases in the presence of TiO₂ inorganic network. The glass transition temperature of polymers increases in the presence of the inorganic network.     

Selective Acetylation of Alcohols and Amines with Ethyl Acetate in the Presence of H<Subscript>6</Subscript>[PMo<Subscript>9</Subscript>V<Subscript>3</Subscript>O<Subscript>40</Subscript>] as the Catalyst

Summary. Acetylation of various alcohols and benzyl amine was tested in the presence of H₆[PMo₉V₃O₄₀], a mixed addenda heteropolyacid, in ethyl acetate under reflux condition. Phenols and anilines are not affected under the reaction conditions. Selective transestrification of alcohols can be achieved in the presence of phenol and aniline derivatives using this method.     

The Preparation and Characterization of Highly Dispersed PdO over Alumina for Low‐temperature Combustion of Methane

PdO/Al₂O₃ catalysts prepared by glow discharge plasma treatment followed by thermal calcination show a much higher dispersion and a better catalytic activity for methane combustion at relatively low temperatures. The dispersion of palladium active species by such plasma prepared catalysts is 29.7%, 5.4 times higher than that of conventional catalysts. XPS analysis indicates that a surface enrichment of Pd active species (PdO) has been achieved after plasma treatment. The surface atomic composition of PdO of plasma prepared catalysts reaches 10.5%. XRD characterization also confirms a wellcrystallized PdO phase present on the plasma prepared catalyst. The lightoff temperature of the plasma prepared catalyst is 370°C, 50°C lower than that obtained from the conventional catalyst.     

金属酞菁化合物在TiO2表面的分散研究

Dispersion of copper(Ⅱ) phthalocyanine (CuPc), copper(Ⅱ) phthalocyaninesulfonate (CuPcS) and cobalt(Ⅱ)phthalocyaninetetrasulfonate (CoPcTS) on the surface of titanium dioxide was investigated by XRD, XPS, FT-IR and UV-Vis techniques. Results show that interaction between CuPc and TiO2 was very weak and CuPc was difficult to disperse on the surface of the support. While partly sulfurized CuPcS could be dispersed on the surface of support through sulfo-groups and its dispersion capacity was determined to be 0.085 g CuPcS/g TiO2. Completely sulfurlzed CoPcTS could also be dispersed on the surface of TiO2 as a monolayer and its dispersion capacity was 0.12 g CoPcTS/g TiO2. Interactions of the sulfo-groups as well as the electrons of CoPcTS with the surface of TiO2 could be evidenced by FT-IR characterization. Therefore, it was suggested that CoPcTS molecules be adsorbed on the surface of TiO2 in a flat-lying mode while CuPcS in a slanting one. UV-Vis spectra show that the dispersed CuPcS and CoPcTS molecules exist in both forms of monomers and dimers.