Enthalpy of Adsorption and Isotherms for Adsorption of Naphthenic Acid onto Clays

The enthalpies of adsorption and the isotherms for adsorption of naphthenic acid onto Na-montmorillonite, Na-kaolinite, and Na-illite were studied by means of calorimetry and the static method at 298.15 K. The results show that the enthalpies of adsorption and saturated adsorption amounts of naphthenic acid on different clays change in the order Na-montmorillonite > Na-illite > Na-kaolinite. The interaction between naphthenic acid and clays is discussed.     

Large-volume stacking in capillary electrophoresis using pH hysteresis of the electroosmotic flow in a bare fused-silica capillary

For large-volume stacking with the electroosmotic flow pump (LVSEP) in capillary electrophoresis of anionic analytes it is required that the electroosmotic mobility (EOM) should be smaller than the magnitudes of the effective mobilities of the analytes. When a fused-silica capillary is treated with an acidic solution, the silanoate group on the silica surface is neutralized to silanol and the EOM is suppressed. Due to the slow deprotonation equilibrium of the silanol group at an intermediate pH, this reduced EOM can be retained during a number of electrophoresis runs. Using a bare fused-silica capillary preconditioned with 0.01 M HCl, successful LVSEP at pH 6.0 was achieved for weakly acidic compounds with two orders of magnitude enhancements in the concentration sensitivity. The repeatability in migration times of ten analytes stacked by LVSEP in a single day was excellent with the relative standard deviation (RSD) less than 1% (n = 6). The day-to-day repeatability was also excellent with RSD less than 3% (n = 3 x 6) when the capillary was preconditioned each day.     

Compressed CO2-enhanced solubilization of 1-butyl-3-methylimidazolium tetrafluoroborate in reverse micelles of Triton X-100

We carried out the first study about the effect of a compressed gas on the properties of reverse micellar solutions with ionic liquid (IL) polar cores. And the properties of compressed CO2/cyclohexane/1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4])/Triton X-100 (TX-100) system were investigated at 288.2, 293.2, 298.2, 308.2 K and different pressures by using phase behavior measurement, small-angle x-ray scattering, and UV-Vis techniques. The concentration of the surfactant in the solution was 0.3 mol/l (M). It was found that compressed CO2 could enhance solubilization of the IL in the reverse micelles considerably at suitable pressures, and formation of the reverse micelles could be controlled easily by pressure. Increase of CO2 pressure resulted in decrease of the micellar sizes at fixed [bmim][BF4]-to-surfactant molar ratios (w), and the size of the reverse micelles increased with the increase of w values. The polarity of the IL cores increased continuously with increasing w value.     

Sensitive Determination of Felodipine in Human and Dog Plasma by Use of Liquid–Liquid Extraction and LC–ESI–MS–MS

Summary A sensitive and selective liquid chromatographic method coupled with electrospray ionization tandem mass spectrometry (LC–ESI–MS–MS) has been developed for quantification of felodipine in human and dog plasma. Compounds were separated on a 2.0 mm × 150 mm, 5.0 m particle, C₈ column with 1 m m ammonium acetate–acetonitrile, 20:80, pH 6.0, as mobile phase at a flow rate of 200 L min^–1. Nifedipine was used as internal standard. Plasma samples were extracted with diethyl ether, the centrifuged upper layer was evaporated, the residue was reconstituted with mobile phase, and the reconstituted samples were injected. The analytical column lasted for at least 1000 injections. By use of multiple reaction monitoring (MRM) mode in MS–MS felodipine and nifedipine were detected without severe interference from the human or dog plasma matrix. Felodipine produced a protonated precursor ion ([M + H]⁺) at m/z 384 and a corresponding product ion at m/z 338. And internal standard (nifedipine) produced a protonated precursor ion ([M + H]⁺) at m/z 347 and a corresponding product ion at m/z 315. Detection of felodipine in human and dog plasma was accurate and precise, with a limit of quantification of 0.05 ng mL^–1. The method has been successfully applied to preliminary pharmacokinetic study of felodipine in human and dog plasma.     

Structural determination of hexadecanoic lysophosphatidylcholine regioisomers by fast atom bombardment tandem mass spectrometry

The structural determination of sn-1 and sn-2 hexadecanoic lysophosphatidylcholine (LPC) regioisomers was carried out using fast atom bombardment tandem mass spectrometry (FAB-MS/MS). The collision-induced dissociation (CID) of protonated and sodiated molecules produced diverse product ions due mainly to charge remote fragmentations. Based on the information obtained from the CID spectra of protonated and sodiated molecules, sn-1 and sn-2 hexadecanoic LPC isomers could be discriminated. Especially, the abundance ratio of the diagnostic ion pair [m/z 224/226] in the CID spectra of [M + H](+) ions was shown to be greatly different. Moreover, the CID-MS/MS spectra of sodium-adducted molecules for hexadecanoic LPC isomers showed characteristic product ions such as [M + Na - 103](+), [M + Na - 85](+), and [M + Na - 59](+), by which their regio-specificity can be differentiated.     

Rhenium oxo complexes of a chelating diyne ligand. Synthesis and study of the kinetics of protonation

A series of oxo complexes, Re(O)X(diyne) (X = I, Me, Et), have been prepared from 2,7-nonadiyne and Re(O)I(3)(PPh(3))(2). Addition of B(C(6)F(5))(3) to Re(O)I(2,7-nonadiyne) (5) results in coordination of the oxo ligand to the boron. The protonation of Re(O)(X)(2-butyne)(2) and Re(O)(X)(2,7-nonadiyne)(2) with a variety of acids has been examined. With 5 and HBF(4)/Et(2)O, the ultimate product was [Re(CH(3)CN)(3)(I)(2,7-nonadiyne)](2+) (7). The conversion of 5 to 7 changes the conformation of the diyne ligand from a "chair" to a "boat" and shifts its propargylic protons considerably downfield in the (1)H NMR. The kinetics of the protonation of Re(O)I(2,7-nonadiyne) (5) by CF(3)SO(3)H in CH(3)CN have been monitored by visible spectroscopy, in a stopped-flow apparatus, and by low temperature (1)H NMR. Two second-order rate constants, presumably successive protonations, were observed in the stopped-flow, k(1) = 11.9 M(-)(1) s(-)(1) and k(2) = 3.8 M(-)(1) s(-)(1). Low temperature (1)H NMR spectroscopy indicated that the resulting solution contained a mixture of two doubly protonated intermediates X and Y, each of which slowly formed the product 7 via an acid-independent process.     

气相毛细管柱切割-反吹技术及归一化法分析汽油中的芳烃(英文)

 发展了一种采用毛细管气相柱切割 反吹技术分析汽油中芳烃的方法。利用强极性毛细管预柱将芳烃保留至n C10 的脂肪族化合物之后 ,并将其反吹到非极性毛细管柱中按沸点详细分离分析。该方法使预柱先流出的组分和分析柱流出的组分通过一个微型三通进入同一检测器中 ,因此可用归一化方法定量分析汽油中的芳烃。该方法可在 15min内完成汽油中苯至C10 芳烃的分析 ,结果的相对标准偏差 (RSD)≤ 3% ,切割误差为± 5s时分析结果的RSD≤ 4 %。     

DMF-甲醇体系粘度与核磁共振化学位移的同时关联

提出了一个基于局部组成概念上的核磁共振模型. 利用该模型和以前别人提出的局部组成型粘度方程, 成功地同时关联属于传递性质的粘度数据和属于波谱性质的核磁共振化学位移数据，关联所得到化学位移的平均绝对偏差小于0.0072，粘度的平均绝对偏差小于0.0006 mPa•s，结果表明提出的局部组成模型是合理的.     

Thermal activation of molecularly-wired gold nanoparticles on a substrate as catalyst

The ability to prepare nanostructured metal catalysts requires the ability to control size and interparticle spatial and surface access properties. In this work, we report novel findings of an atomic force microscopic investigation of a controlled thermal activation strategy of gold catalysts nanostructured via molecular wiring or linking on a substrate surface. Gold nanocrystals of approximately 2 nm diameter capped by decanethiolate and wired by 1,9-nonanedithiolate on mica substrates were studied as a model system. By manipulating the activation temperature (200-250 degrees C), the capping/wiring molecules can be removed to produce controllable particle size and interparticle spatial morphology. The electrocatalytic activity of the activated nanostructures toward methanol oxidation, which is of fundamental importance to fuel cell catalysis, has been demonstrated. The novelty of the findings is the viability of a thermal activation strategy of core-shell nanostructured catalysts based on molecularly predefined interparticle spatial properties on a substrate, which upon further investigation may form the basis for spatially controllable nanostructured catalysts.     

Kinetics of the degradation of polystyrene in supercritical acetone

The kinetic analysis of the degradation of polystyrene (PS) in supercritical acetone has been studied using the nonisothermal weight loss technique with heating rates of 3, 5 and 7 °C/min. The weight loss data according to degradation temperature have been analyzed using the integral method based on Arrhenius form to obtain the kinetic parameters such as apparent activation energy and overall reaction order. The kinetic parameters obtained from this work were also compared with those of the thermal degradation of PS in nitrogen atmosphere. From this work, it was found that the activation energies of PS degradation in supercritical acetone were 73.3-200.7 kJ/mol and lower than those of the thermal degradation in nitrogen atmosphere.