高温高压Li3N-hBN体系cBN转变的热力学分析

以经典热力学第二定律ΔG<0为依据,分析了静态高温高压触媒法合成立方氮化硼(cBN)过程中发生的可能反应.考虑温度和压强对反应物相体积的影响,计算了六方氮化硼(Li3N-hBN)体系中hBN+Li3N→Li3BN2,h BN→cBN及Li3BN2→Li3N+cBN反应在高温高压条件下的ΔG.结果证实,Li3BN2由Li3N与hBN在高温高压(T>1300 K,P>3.0 GPa)条件下反应得到,在cBN的合成(T=1600～1800 K,P=4.6～6.0 GPa)条件下,hBN和Li3BN2都有向cBN转化的倾向,但由hBN向cBN直接转变的反应自由能比Li3BN2分解生成cBN的反应自由能更负,反应的可能性更大.探讨了高温高压条件下立方氮化硼的转变机理。     

多孔炭载聚钴酞菁修饰电极用于苯二酚的电催化及检测

以二氧化硅纳米球为模板,通过葡萄糖的水热聚合反应制备了具有三维结构的多孔炭(PC)。采用电化学聚合方法将单体钴酞菁聚合在多孔炭修饰的玻碳电极(PC/GC)表面,制备了多孔炭载聚钴酞菁的修饰电极(Co-TAPc/PC/GC)。通过循环伏安法(CV)研究了间苯二酚、邻苯二酚和对苯二酚在此修饰电极的电化学响应。结果表明,相对于裸玻碳电极、多孔炭或聚钴酞菁单独修饰的电极,该修饰电极对3种同分异构体的酚类物质均有更好的电催化活性。利用计时安培技术,该修饰电极对间苯二酚、邻苯二酚及对苯二酚分别在5.0×10-6～5.0×10-4 mol/L,6.0×10-6～2.5×10-4 mol/L和2.0×10-6～8.0×10-4 mol/L范围内具有较好的线性响应。此修饰电极具有制备简单、响应灵敏、稳定性好等优点。     

Effect of Plasma Treatment on the Structures and Properties of Konjac Glucomannan Film

To understand the effect of plasma treatment on the Konjac glucomannan film, the nitrogen plasma was injected into the film by ion beam injection machine in this study. The structures and properties of Konjac glucomannan film after plasma treatment were analyzed by Infrared spectroscopy, Raman spectrum, X-ray, ect. The result showed that nitrogen groups appeared in the KGM molecular chain and part of this chain fractured, and the number of hydrogen bonds increased after the treatment of plasma. The form of KGM molecule remained amorphous non-crystalline state, but the crystalline region was increased and became more ordered. The mechanical property of tensile strength and breaking elongation was improved, while the WVP was decreased. The nitrogen groups were grafted on the KGM molecular chain after plasma treatment, which led to the improvement of the properties of KGM film.     

N-杂环卡宾催化合成取代γ-丁内酯研究进展

取代γ-丁内酯是一类非常重要的精细化学品。N-杂环卡宾(NHC)催化α,β-不饱和醛发生共轭极性反转后,与芳香醛、三氟甲基酮、酮酸酯或邻二酮等发生环化反应可一步生成不同取代的γ-丁内酯化合物。该方法具有原子经济性高、路径简捷、反应条件温和等明显的优势。本文主要结合笔者课题组的研究方向,从不同催化剂前体和不同反应底物两方面进行分类,介绍近年来NHC催化合成取代γ-丁内酯的方法及其研究进展,归纳总结了不同催化体系的优缺点,并在此基础上展望了NHC催化合成取代γ-丁内酯反应的发展趋势和应用前景。     

Synthesis of 1,3-dithiolane-containing nitromethene compounds and their biological activity as insecticides

1,3-Dithiolane-containing nitromethylene derivatives, as candidates for screening as neonicotinoid insecticides, were synthesized by reaction of compound (4) with 1,2-ethanedithiol. Compounds 7a–g were obtained via Mannich reaction of (E)-1-((1,3-dithiolan-2-yl)methyl)-2-(nitromethylene)imidazolidine (6), primary amines and formaldehyde. The synthesized compounds were identified by ¹H NMR, IR spectroscopy and elemental analysis. Preliminary bioassays indicated that most of the compounds had moderate insecticidal activity against Aphis craccivora. The relationship between molecular structure and biological activity is discussed.     

稀释蒸汽中Na+及积炭对甲醇制丙烯催化剂性能影响

考察了稀释蒸汽中Na⁺及积炭对甲醇制丙烯(MTP)催化剂物理化学性质和催化性能影响, 及离子交换后催化性能. 采用X射线衍射(XRD)、扫描电镜(SEM)、X射线荧光(XRF)光谱、N₂吸附-脱附、程序升温氨脱附(NH3-TPD)和热重(TG)分析等方法对失活和再生催化剂进行了表征, 并在101325 Pa、470℃ 和甲醇空速(WHSV)为1.0-3.0 h^-1的反应条件下, 采用连续流动固定床微型反应器考察其催化甲醇制丙烯性能. 结果表明: MTP反应970 h后的催化剂晶体结构和形貌没有受到明显破坏, 但稀释蒸汽中Na⁺极易扩散至催化剂表面,部分取代H质子的位置, 从而使催化剂酸性逐渐下降而中毒失活; 另外, MTP催化剂表面的积炭导致分子筛微孔堵塞是造成其失活的主要原因, 可通过烧炭再生过程消除, 而水蒸汽脱铝对催化剂性能的影响缓慢但更严重. 用再生和离子交换处理后, Na⁺中毒催化剂MTP反应性能基本完全恢复. 在470 h反应过程中, 甲醇转化率保持在99%以上, 丙烯选择性大于46%, 且随着反应时间的延长, 丙烯选择性逐渐升高、乙烯选择性逐渐下降.     

AgGa(S1-xSex)2固溶体的电子结构和光学性质

采用基于赝势平面波基组的密度泛函理论方法, 对一系列具有黄铜矿结构的AgGa(S_1-xSe_x)₂固溶体的构型、电子结构、线性和二阶非线性光学性质进行了系统研究. 结果表明, 各固溶体具有类似的能带结构, 体系带隙随x值增加而逐渐减小. 当所引入的Hartree-Fock交换项贡献为22.56%时, 对应的杂化PBE泛函得到的带隙值与实验结果相近. 固溶体的各种光学性质, 包括折射率、双折射率、反射率、吸收系数和二阶倍频系数等均随着组成的改变呈现出有规律的变化趋势, 变化范围介于AgGaS₂和AgGaSe₂二者之间. 因此, 利用固溶体光学性质的变化规律, 可从中寻找出具有特定光学性能的晶体材料.     

Ca0.8-2x(YbxTb0.1Na0.1+x)2xWO4近红外下转换荧光粉水热合成及发光性质

一种在近红外光谱(NIR)区域高效的量子剪裁现象已在Ca0.8-2x(Ybx Tb0.1Na0.1+x)2x WO4(x=0～0.2)荧光粉中得到证实,该量子剪裁通过吸收紫外线光子发射近红外光子,能量传递包括两个协同过程,分别是WO42-基团到Yb3+离子和WO42-基团到Tb3+离子再到Yb3+离子,Yb3+离子的掺杂浓度对荧光粉在可见光和近红外光谱的发光,荧光寿命和量子效率的影响已进行了详细的研究。经计算,量子效率最大达到135.7%。铽与镱共掺钨酸钙的近红外量子剪裁,通过吸收太阳光谱的1个紫外光子到2个1 000 nm光子(2倍光子数增加)的下转化机制实现高效率硅太阳能电池的途径。     

组氨酸、组胺醇和组胺钴(Ⅱ)配合物氧合性能的比较研究

本文用UV-Vis光谱和氧电极法对结构相似的His-Co、Hio-Co、Hit-Co 3组配合物氧合性能进行了对比研究。由配合物光谱随pH变化的A-pH曲线,可知3组配合物均在pH 6.0以后开始发生氧合反应,在pH 6.0～10.0的范围内His-Co有2种氧合物种生成,其他2组配合物均只有1种氧合配合物生成。用等摩尔比法对氧合配合物的组成比进行了测定,得知Co∶His与Co∶Hio的配位比为1∶2,而Co∶Hit为1∶3;在室温水溶液中和pH 7的条件下,用UV-Vis在波长384 nm下分别考察了3组配合物的氧合性能和它们的抗老化能力,结果表明3组配合物在室温水溶液中均可发生氧合反应,但氧合性能有很大差异,His-Co经过110 h累计560次可逆循环,仍然具有5%氧合性能,而Hio、Hit分别经过59次/54 h、5次/10.2 h循环后氧合性能衰减至5%。3组配合物的抗老化能力的大小顺序为:His-Co>>Hio-Co>Hit-Co。研究结果初步说明:三配位原子配体配合物的可逆吸氧性能好于二配位原子配体的配合物,氨基酸配合物优于氨基醇配合物。     

Highly selective trifluoroacetic ester/ketone metathesis: an efficient approach to trifluoromethyl ketones and esters

A highly selective and atom efficient ‘trifluoroacetic ester/ketone metathesis’ has been sincerely witnessed. Enolizable alkyl (at least two non-hydrogen atoms) aryl ketones were found to react readily with ethyl trifluoroacetate under the promotion of NaH to afford trifluoroacetic ester/ketone exchange products, trifluoromethyl ketones (TFMKs), and aromatic acid esters, which were quite different from the general Claisen condensation products, 1,3-diketones. The outcome of the reaction between ketone and ethyl trifluoroacetate is strongly related to the structures of substrates, the steric congestion caused by alkyl group is in favor of the C–C bond cleavage. DFT investigation further disclosed that the metathesis reaction was a kinetically favored pathway. Using only a slight excess of cheap trifluoromethylation reagent, simple operation and mild conditions make it a practical method for preparation of TFMKs on large scale, as well as a new choice of converting aryl alkyl ketones to aromatic acid esters.