Y2O3涂层负载Pd整体式催化剂的制备和催化性能

以Y(NO3)3为前驱体制备了Y2O3涂层的堇青石蜂窝陶瓷载体.扫描电子显微镜、X射线能谱和超声波振荡等表征结果表明,Y2O3涂层不但具有良好的抗振荡性和粘结强度,而且具有很强的吸附催化剂活性组分(H2PdCl4)的能力,适合制备负载型Pd催化剂.以甲苯和乙酸乙酯完全燃烧为模型反应考察了催化剂的活性,发现以Y2O3涂层堇青石蜂窝陶瓷为载体的整体式Pd/Y2O3催化剂具有良好的催化活性和热稳定性,甲苯和乙酸乙酯催化燃烧的T99分别为210和300℃;催化剂经900℃焙烧4 h后,T99仅提高20℃,表明催化剂具有很高的热稳定性.催化剂的X射线衍射、拉曼光谱和程序升温还原结果表明,Pd/Y2O3催化剂经低温焙烧时,Y2O3和PdO均高度分散在堇青石蜂窝陶瓷的表面,而高温焙烧使催化剂活性组分PdO晶粒增大,从而导致催化剂活性下降.     

电磁感应在线消化-原子荧光光谱法测定茶水中的砷

利用电磁感应加热原理,研制了在线消化还原、氢化物发生原子荧光法分析装置,实现了茶水中As量的在线测定.对各种实验参数和干扰情况进行了研究.方法的检出限为0.063 μg/L;样品分析精密度(RSD)为2.5%(n=11).     

Y_2O_3－Nb_2O_5－B_2O_3：Eu~（3＋）·Bi~（3＋）的燐光体的晶体结构与光谱性质

采用常规固相反应于１２００℃下制备了具有褐钇铌矿结构的Ｙ２Ｏ３·Ｎｂ２Ｏ５·Ｂ２Ｏ３（Ｙ（０．９３）Ｅｕ（０．０７））２Ｏ３·Ｎｂ２Ｏ５·Ｂ２Ｏ３和（Ｙ（０．９１）Ｅｕ（０．０７）Ｂｉ０．０２））２Ｏ３·Ｎｂ２Ｏ５·Ｂ２Ｏ３等光体，研究了它们的发光性质：结果表明，在２６８ｎｍ紫外光激发下，由于ＮｂＯ４基团于４１０ｎｍ处发生１Ｔ→１Ａ１跃迁，致使Ｙ２Ｏ５·Ｎｂ２Ｏ５·Ｂ２Ｏ３呈现更亮的紫外发射。体系中的Ｂ２Ｏ３可降低反应温度，增强ＮｂＯ４和Ｅｕ（３＋）的发光强度。（Ｙ（０．０９１）Ｅｕ（０．０７）Ｂｉ（０．０２））２Ｏ３·Ｎｂ２Ｏ５·Ｂ２Ｏ３燐光体系中所观察到的ＮｂＯ４→Ｅｕ（３＋）和Ｂｉ（３＋）→Ｅｕ（３＋）的能量传递使红光发射明显增强。     

甲基紫修饰的微晶酚酞分离富集-光度法测定痕量铋(Ⅲ)的研究

建立了以修饰有甲基紫(MV)的微晶酚酞作为固相吸附剂分离富集和测定环境样品中痕量Bi(Ⅲ)的新方法.研究表明,Bi(Ⅲ)与I-、 MV 形成三元离子缔合物[BiI6] (MV)3能定量吸附在微晶酚酞上,在适当条件下,Bi(Ⅲ)能与Co(Ⅱ)、 Ni(Ⅱ)、 Mn(Ⅱ)、 Fe(Ⅱ)、 Al(Ⅲ)、 Zn(Ⅱ)等常见阳离子分离,且基本不受Br-、 SCN-、 SO42-、 NO3-、 Cl-、 ClO4-等阴离子影响.Bi(Ⅲ)的静态吸附容量为0.81 mmol/g,富集因数可达200倍,回收率在97.2%以上,RSD 1.3%～2.2%之间.已应用于环境水样中Bi(Ⅲ)的测定.     

氢气辅助的水中埋弧法制备小直径碳纳米管

用改进的石墨电弧放电方法制备了小直径、高质量的碳纳米管,以水为打弧介质,氢气为保护气体.该方法具有装置简单,电流小,无催化剂,制备出的多壁碳纳米管直径小于10 nm等优点.     

烯烃聚合数学模拟研究与现状

综述了近年来国内外在烯烃聚合微观形态和宏观反应器数学模拟方面取得的研究成果，指出了烯烃聚合过程数学模拟的发展方向。     

Reaction Ergodography and Transition State Analyses of the Addition of AIH_3 to Acetylene

The present paper covers the reaction ergodography for the addition of AlH3 to acetylene investigated by ab initio calculation with RHF/3-21G basis set. The changes in some physical properties along the reaction path (IRC) are presented. The formations of FMOs of the transition state have been analyzed according to the Fukui' s method. On the basis of the perturbation theory and Wolfsborg Helmholtz formula, we calculated the FMO' s energy orders of TS and its formation that shows the HOMO of TS consists of LUMO, HOMO of AlH3 and HOMO of HCCH.     

Controllable self-assembly of parallel gold nanorod clusters by DNA origami

We demonstrate the self-assembly of three types of parallel gold nanorod clusters using a rod-like DNA origami as the template.     

一种新型双亚胺吡啶铁系催化剂的乙烯低聚研究

线性α 烯烃广泛地应用于洗涤剂、增塑剂、润滑油等精细化学品的合成以及作为共单体制备线性低密度聚乙烯 (ＬＬＤＰＥ) .目前工业上主要是应用ＳＨＯＰ法[1] 、Ｃｈｅｖｒｏｎ工艺和Ａｍｏｃｏ工艺[2 ] 通过乙烯低聚制备 .近些年发展起来的新型高活性后过渡金属乙烯低聚催化剂能够高选择性地制备线性α 烯烃[3 ,4] .Ｂｒｏｏｋｈａｒｔ等[4] 的研究表明 ,对于双亚胺吡啶铁系乙烯聚合催化剂而言 ,配体上苯基的邻位取代基位阻减小可以实现乙烯低聚 ,并具有高活性、高选择性以及理想的低聚产物分布 .本文的工作是从配体的空间位阻效应对催化剂…     

Synthesis of Highly Porous Organic/Inorganic Hybrids by Ambient Pressure Sol-Gel Processing

This paper reports the synthesis of highly porous organic/inorganic hybrids by a two-step acid-base catalyzed sol-gel process and ambient pressure drying. In the method organic and inorganic precursors are copolymerized so as to incorporate organic ligands into the solid network. The two-step acid-base catalyzed process was used to prevent phase segregation during the hydrolysis and co-condensation of organic and inorganic precursors. The organic ligands incorporated into the solid gel network modify the surface chemistry. Thus, the wetting angle is significantly increased so that the collapse of the gel network is greatly reduced upon the removal of pore fluid during drying. Organic/inorganic hybrids with BET surface areas above 1250 m2/g, porosities above 75% and pore sizes of 8 nm have been synthesized.