Studies on self-pumped phase conjugation in Cu-doped (K0.5Na0.5)0.2(Sr0.61Ba0.39)0.9Nb2O6 crystals

The use of Cu-doped (K_0.5Na_0.5)_0.2(Sr_0.61Ba_0.39)_0.9Nb₂O₆ as self-pumped phase conjugators using internal reflection is reported. Reflectivities as high as 63% at 5145.5 nm and 60% at 632.8 nm were realized. It was found that the photorefractive response changes significantly at different doping concentration. The responses of the crystals to the laser wavelength, incident angle and dopant concentration are studied.     

微分脉冲溶出伏安法同时测定食品中的锌铁锰

在1％乙二胺-0．1mol／L酒石酸钠-pH11．82 Britton—Robinson缓冲溶液体系中用微分脉冲溶出伏安法同时测定锌、铁、锰三种微量元素。它们的峰电位分别为-1184，-1392和-1456mV(vs．Ag/AgCl)；线性范围分别为：0.001—0.015，0．005—0．05和0．04—0．7μg／mL，最低检出浓度分别为0．0007，0．0014和0．0193μg／mL。本法操作简便、准确、灵敏度较高，用于食品中这三种元素的分析，结果令人满意。     

三组元乳化液雾化特性的研究

采用Malvern粒度仪对柴油、甲醇和水三组元乳化液的雾化特性进行了研究。实验发现:对于压力雾化喷嘴来说,本文所涉及的乳化液由于粘度高于纯柴油,因此雾化效果比纯柴油差,而且喷射压力、乳化剂的粘度和乳化液的组份对乳化液的雾化特性具有显著的影响。随着喷射压力的升高,乳化液喷雾粒径将随之减小;若乳化液中柴油的含量(柴油不少于50％)降低,乳化液的雾化粒径将随之增加;若采用高粘度的乳化剂,相应乳化液喷雾的粒径也大。     

医疗和危险废物高温洁净热处理及环境力学

结合2003年中国的突发危害公众健康的事件，分析了医疗、化学战剂及危险废物的分类、特性，比较了各种高温热处理技术的基本要求，方法分类和设备特点，包括：各类焚烧炉、热解炉和等离子体裂解装置．还对前处理工艺要求，尾气处理工艺等进行了分析讨论，讨论了防止二次污染的技术手段，特别介绍了二噁英等高危险性产物的特性．还介绍了发达国家的医疗废物和危险废物的管理、处置和二次污染防治等情况．     

用地面阵列寻找TeV能区γ点源的方法探讨

文中探讨搜寻TeV能区γ点源的方法.讨论利用student变量t判断来自源区及背景区宇宙线事例的统计差别,并由Bayes定理与MonteCarlo模拟相结合计算源区各能段的信号数,推算蟹状星云在TeV能区的γ射线微分能谱     

一种基于闭环优化的新型鲁棒预测控制方法

针对带约束的凸多面体线性不确定模型，提出了一种新型鲁棒预测控制方法，它采用离散化的不确定模型构造最小－最大优化控制问题，并在其中直接引入状态反馈机制，与其他最小－最大预测控制方法相比，这种方法等效于增加了控制序列的长度，为优化问题增加了更多的自由度，从而扩大了可行域，作为最小化目标的是离散化不确定系统在整个预测时域上二次型成本函数的最大值，而不是各预测阶段应成本项的上界之和，从而减少了与最小－最大优化相关的方程个数，有利于降低计算复杂性，文中进一步证明了不确定系统的闭环稳定性取决于优化问题在初始时刻的可行性，并将优化问题转化为线性矩阵不等式形式。最后，以数值仿赵例子验证了方法的有效性。     

北京同步辐射装置3B1B生物光谱实验站

本文介绍北京同步辐射装置（ＢＳＲＦ）３Ｂ１Ｂ光束线、生物光谱实验站和圆二色谱仪的基本情况。报道北京正负电子对撞机（ＢＥＰＣ）同步辐射专用光期间，我们在站测量了１１种手征性生物和药物样品的圆二色（ＣＤ）谱，首次在国内利用同步辐射光获取了Ｄ－苯丙氨酸等样品的ＣＤ谱和Ｄ－及Ｌ－亮氨酸对称的ＣＤ曲线。     

In situ Synthesis of Oligonucleotides on Plasma Treated Polypropylene Microporous Membrane

Polypropylene microporous membranes were treated with plasma in a mixture of N2 and H2 (1:2 in volume). Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and ultra-violet (UV) spectra demonstrated the success of grafting amino groups. The density of the polar amino groups on the membrane surface is about 0.59 μmol/cm^2. The as-treated membranes were successively applied to the in situ synthesis of oligonucleotides and an average coupling yield was more than 98%. The surface feature of the treated membrane is suggested to be responsible for its advantage over a glass slide.     

Ethylene–propylene copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Ethylene–propylene copolymerization, using [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ (R₁ = CF₃, Ph, or t‐Bu; R₂ = CH₃ or CF₃) titanium complexes activated with modified methylaluminoxane as a cocatalyst, was investigated. High‐molecular‐weight ethylene–propylene copolymers with relatively narrow molecular weight distributions and a broad range of chemical compositions were obtained. Substituents R₁ and R₂ influenced the copolymerization behavior, including the copolymerization activity, methylene sequence distribution, molecular weight, and polydispersity. With small steric hindrance at R₁ and R₂, one complex (R₁ = CF₃; R₂ = CH₃) displayed high catalytic activity and produced copolymers with high propylene incorporation but low molecular weight. The microstructures of the copolymers were analyzed with ¹³C NMR to determine the methylene sequence distribution and number‐average sequence lengths of uninterrupted methylene carbons. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5846–5854, 2006     

Double‐hydrophilic block copolymer for encapsulation and two‐way pH change‐induced release of metalloporphyrins

A double hydrophilic block copolymer composed of poly(acrylic acid) (PAA) and poly(4‐vinyl pyridine) (P4VP) was obtained through hydrolysis of diblock copolymer of poly(tert‐butyl acrylate) (PtBA) and P4VP synthesized using atom transfer radical polymerization. Water‐soluble micelles with PAA core and P4VP corona were observed at low (acidic) pH, while micelles with P4VP core and PAA corona were formed at high (basic) pH. Two metalloporphyrins, zinc tetraphenylporphyrin (ZnTPP) and cobalt tetraphenylporphyrin (CoTPP), were used as model compounds to investigate the encapsulation of hydrophobic molecules by both types of micelles. UV–vis spectroscopic measurements indicate that micelles with P4VP core are able to entrap more ZnTPP and CoTPP as a result of the axial coordination between the transition metals and the pyridine groups. The study found that metalloporphyrins encapsulated by the micelles with PAA core could be released on pH increase, while those entrapped by the micelles with P4VP core could be released on pH decrease. This behavior originates from the two‐way pH change‐induced disruption of PAA‐b‐P4VP micelles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1734–1744, 2006