Copolymerization of ethylene and cyclopentene with bis(β‐enaminoketonato) titanium complexes

The copolymerizations of ethylene and cyclopentene with bis(β‐enaminoketonato) titanium complexes {[(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂; R₁ = CF₃ and R₂ = CH₃ for 1a , R₁ = Ph and R₂ = CF₃ for 1b ; and R₁ = t‐Bu and R₂ = CF₃ for 1c } activated with modified methylaluminoxane (MMAO) as a cocatalyst were investigated. High‐molecular‐weight copolymers with cis‐1,2‐cyclopentene units were obtained. The catalyst activity, cyclopentene incorporation, polymer molecular weight, and polydispersity could be controlled over a wide range through the variation of the catalyst structure and reaction parameters, such as the Al/Ti molar ratio, cyclopentene feed concentration, and polymerization reaction temperature. The complex 1b /MMAO catalyst system exhibited the characteristics of a quasi‐living ethylene polymerization and an ethylene–cyclopentene copolymerization and allowed the synthesis of polyethylene‐block‐poly(ethylene‐co‐cyclopentene) diblock copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1681–1689, 2005     

Ethylene/α‐olefin copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Copolymerizations of ethylene with α‐olefins (i.e., 1‐hexene, 1‐octene, allylbenzene, and 4‐phenyl‐1‐butene) using the bis(β‐enaminoketonato) titanium complexes [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ ( 1a : R₁ = CF₃, R₂ = CH₃; 1b : R₁ = Ph, R₂ = CF₃; and 1c : R₁ = t‐Bu, R₂ = CF₃), activated with modified methylaluminoxane as a cocatalyst, have been investigated. The catalyst activity, comonomer incorporation, and molecular weight, and molecular weight distribution of the polymers produced can be controlled over a wide range by the variation of the catalyst structure, α‐olefin, and reaction parameters such as the comonomer feed concentration. The substituents R₁ and R₂ of the ligands affect considerably both the catalyst activity and comonomer incorporation. Precatalyst 1a exhibits high catalytic activity and produces high‐molecular‐weight copolymers with high α‐olefin insertion. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6323–6330, 2005     

Ethylene polymerizations,and the copolymerizations of ethylene with hexene or norbornene with highly active mono(β‐enaminoketonato) vanadium(III) catalysts

Five novel vanadium(III) complexes [PhN = C(R₂)CHC(R₁)O]VCl₂(THF)₂ ( 4a : R₁ = Ph, R₂ = CF₃; 4b : R₁ = t‐Bu, R₂ = CF₃; 4c : R₁ = CF₃, R₂ = CH₃; 4d : R₁ = Ph, R₂ = CH₃; 4e : R₁ = Ph, R₂ = H) have been synthesized and characterized. On activation with Et₂AlCl, all the complexes, in the presence of ethyl trichloroacetate (ETA) as a promoter, are highly active precatalysts for ethylene polymerization, and produce high molecular weight and linear polymers. Catalyst activities more than 16.8 kg PE/mmol_V h bar and weight‐average molecular weights higher than 173 kg/mol were observed under mild conditions. The copolymerizations of ethylene and norbornene or 1‐hexene with the precatalysts were also explored, which leads to high molecular weight copolymers with high comonomer incorporation. Catalyst activity, comonomer incorporation, and polymer molecular weight as well as polydispersity index can be controlled over a wide range by the variation of precatalyst structure and the reaction parameters such as Al/V molar ratio, comonomer feed concentration, and polymerization temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2038–2048, 2008     

Quasi‐living copolymerization of ethylene with 1‐hexene by heteroligated (salicylaldiminato β‐enaminoketonato) titanium complexes

A series of heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH = N(C₆F₅)] [PhN = C(R₁)CHC(R₂)O]TiCl₂ [ 3a : R₁ = CF₃, R₂ = ^tBu; 3b : R₁ = Me, R₂ = CF₃; 3c : R₁ = CF₃, R₂ = Ph; 3d : R₁ = CF₃, R₂ = C₆H₄Ph(p ); 3e : R₁ = CF₃, R₂ = C₆H₄Ph(o ); 3f : R = CF₃, R₂ = C₆H₄Cl(p ); 3g : R₁ = CF₃; R₂ = C₆H₃Cl₂(2,5); 3h : R₁ = CF₃, R₂ = C₆H₄Me(p )] were investigated as catalysts for ethylene (co)polymerization. In the presence of modified methylaluminoxane as a cocatalyst, these complexes showed activities about 50%–1000% and 10%–100% higher than their corresponding bis(β‐enaminoketonato) titanium complexes for ethylene homo‐ and ethylene/1‐hexene copolymerization, respectively. They produced high or moderate molecular weight copolymers with 1‐hexene incorporations about 10%–200% higher than their homoligated counterpart pentafluorinated FI‐Ti complex. Among them, complex 3b displayed the highest activity [2.06 × 10⁶ g/mol_Ti?h], affording copolymers with the highest 1‐hexene incorporations of 34.8 mol% under mild conditions. Moreover, catalyst 3h with electron‐donating group not only exhibited much higher 1‐hexene incorporations (9.0 mol% vs. 3.2 mol%) than pentafluorinated FI‐Ti complex but also generated copolymers with similar narrow molecular weight distributions (M _w/M _n = 1.20–1.26). When the 1‐hexene concentration in the feed was about 2.0 mol/L and the hexene incorporation of resultant polymer was about 9.0 mol%, a quasi‐living copolymerization behavior could be achieved. ¹H and ¹³C NMR spectroscopic analysis of their resulting copolymers demonstrated the possible copolymerization mechanism, which was related with the chain initiation, monomer insertion style, chain transfer and termination during the polymerization process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2787–2797     

Facile,efficient functionalization of polyethylene via regioselective copolymerization of ethylene with cyclic dienes

The copolymerizations of ethylene with cyclic dienes [dicyclopentadiene (DCPD) and 2,5‐norbornadiene (NBD)] using bis(β‐enaminoketonato)titanium complexes [PhN = C(R₂)CHC(R₁)O]₂TiCl₂ ( 1a : R₁ = CF₃, R₂ = CH₃; 1b : R₁ = t‐Bu, R₂ = CF₃; 1c : R₁ = Ph, R₂ = CF₃) have been investigated. In the presence of modified methylaluminoxane, these complexes exhibited high catalytic activities in the copolymerization of ethylene with DCPD or NBD, affording high molecular weight copolymers with unimodal molecular weight distributions. ¹H and ¹³C‐NMR spectra reveal ethylene/DCPD copolymerizations by catalysts 1a – c proceeds through the enchainment of norbornene ring. Catalysts 1a and 1c showed a tendency to afford alternating copolymers. More noticeably, catalysts 1b and 1c bearing bulky substituents on the ligands promote ethylene/NBD copolymerization without crosslinking, affording the copolymer containing intracyclic double bonds. The NBD incorporation as high as 27.2 mol % has been achieved by catalyst 1c . Moreover, the microstructures of the copolymers were further confirmed by the measurement of reactivity ratios and dyad monomer sequences as well as mean sequence lengths. The intracyclic double bonds of ethylene/DCPD or ethylene/NBD copolymers can be fully converted into polar groups such as epoxy, amine, silane, and hydroxyl groups under mild conditions. Convenient synthesis of hydroxylated polyethylene can be provided for the first time through the ring opening reaction of epoxide. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1764–1772, 2010     

Copolymerization behavior of titanium imidazolin‐2‐iminato complexes

Monocyclopentadienyl titanium imidazolin‐2‐iminato complexes [Cp′Ti(L)X₂] 1a (Cp′ = cyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), 1b (X = CH₃); 2 (Cp′ = cyclopentadienyl, L = 1,3‐diisopropylimidazolin‐2‐imide, X = Cl); 3 (Cp′ = tert‐butylcyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), upon activation with methylaluminoxane (MAO) were active for the polymerization of ethylene and propylene and the copolymerization of ethylene and 1‐hexene. Catalysts derived from imidazolin‐2‐iminato tropidinyl titanium complex 4 = [(Trop)Ti(L)Cl₂] (Trop = tropidinyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide) were much less active. Narrow polydispersities were observed for ethylene and propylene polymerization, but the copolymerization of ethylene/hexene led to bimodal molecular weight distributions. The productivity of catalysts derived from the dialkyl complex 1b activated with [Ph₃C][B(C₆F₅)₄] or B(C₆F₅)₃ were less active for ethylene/hexene copolymerization but yielded ethylene/hexene copolymers of narrower molecular weight distributions than those derived from 1a/MAO. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6064–6070, 2008     

Sulfonic acids as water‐soluble initiators for cationic polymerization in aqueous media with Yb(OTf)3

Aqueous sulfonic acids (HOSO₂R; R = CH₃, Ph‐p‐CH₃, and Ph‐p‐NO₂), coupled with a water‐tolerant Lewis acid, ytterbium triflate [Yb(OTf)₃; OTf =  OSO₂CF₃], initiate the cationic suspension polymerization of p‐methoxystyrene (pMOS) in heterogeneous aqueous media. They induce controlled polymerization of pMOS at 30 °C, and the molecular weights of the polymers (weight‐average molecular weight/number‐average molecular weight ∼ 1.7) increase with conversion. These suspension polymerizations are initiated by the entry of sulfonic acid from the aqueous phase into the organic phase and proceed via reversible activation of the sulfonyl terminus by the Lewis acid. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2728–2733, 2000     

Cyclocopolymerization of 1,4‐pentadiene with ethene in the presence of group‐4 metallocenes

The behaviors of rac‐[CH₂(3‐tert‐butyl‐1‐indenyl)₂]ZrCl₂ ( 1 ) and Cp₂ZrCl₂ ( 2 ) activated by methylaluminoxane in ethene/1,4‐pentadiene copolymerization are compared. In the presence of 1 , inserted methylene‐1,3‐cyclobutane units, a large number of crosslinks, and a small number of methylene‐1,3‐cyclohexane units are obtained. Differently, a polyethene containing only 1,3‐cyclohexane rings is achieved with 2 as the catalytic precursor. Polymer microstructures are compared with those obtained with 1 and 2 in ethene/1,6‐heptadiene copolymerization, which leads only to polyethene containing cyclohexane rings. A tentative rationalization of the experimental data is reported. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5525–5532, 2006     

Design of maleimide monomer for higher level of alternating sequence in radical copolymerization with styrene

This work deals with design of maleimide monomer toward more precise control of alternating sequence for radical copolymerization with styrene. Crucial in this study is sequence analysis by MALDI‐TOF‐MS for resultant copolymers that was obtained via ruthenium‐catalyzed living radical copolymerization with a malonate‐based alkyl halide initiator showing selective initiation ability. The copolymers of a simple N‐alkyl maleimide [e.g., N‐ethyl maleimide (EMI)] with styrene gave complicated peak patterns for the MALDI‐TOF‐MS spectra indicating low degree of alternating sequence, in contrary to expectation from the reactivity ratios (almost zero). A simple substitution of methyl group (CH₃) of EMI with trifluoromethyl (CF₃: CF₃‐MI) made the peak patterns much simpler giving the copolymer with higher alternating sequence. More interestingly, the peak interval of the copolymer at earlier polymerization stage was equal to sum of the molecular weights of CF₃‐MI and styrene, suggesting possibility of the pair propagation of the monomers. Indeed, ¹H NMR analyses of the mixture of maleimide with styrene suggested stronger interaction of CF₃‐MI than EMI. Based on the results, maleimide derivatives carrying a substituent‐designable electron‐withdrawing group [ROC(?O)N–: R = substituent] were newly designed toward incorporation of functional side chains. They also gave higher alternating sequence for the copolymerization with styrene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 367–375     

Novel amorphous perfluorocopolymeric system: Copolymers of perfluoro‐2‐methylene‐1,3‐dioxolane derivatives

Perfluorotetrahydro‐2‐methylene‐furo[3,4‐d][1,3]dioxole (monomer I ) and perfluoro‐2‐methylene‐4‐methoxymethyl‐1,3‐dioxolane (monomer II ) are soluble in perfluorinated or partially fluorinated solvents and readily polymerize in solution or in bulk when initiated by a free‐radical initiator, perfluorodibenzoyl peroxide. The copolymerization parameters have been determined with in situ ¹⁹F NMR measurements. The copolymerization reactivity ratios are r _I = 1.80 and r _II = 0.80 in 1,1,2‐trichlorotrifluoroethane at 41 °C and r _I = 0.97 and r _II = 0.85 for the bulk polymerization. These data show that this copolymerization pair has a good copolymerization tendency and yields nearly ideal random copolymers. The copolymers have only one glass‐transition temperature from 101 to 168 °C, depending on the copolymer compositions. Melting endotherms have not been observed in their differential scanning calorimetry traces, and this indicates that all the copolymers with different compositions are completely amorphous. These copolymers are thermally stable (the initial decomposition temperatures are higher than 350 °C under an N₂ atmosphere) and have low refractive indices and high optical transparency from UV to near‐infrared. Copolymer films prepared by casting were flexible and tough. These properties make the copolymers ideal candidates as optical and electrical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1613–1618, 2006     

Novel multifunctional polymeric materials with predominant cis microstructures derived from α‐norbornenyl macromonomer and stable macroinitiator via ring‐opening metathesis polymerization and atom transfer radical polymerization

Novel star‐like polymeric materials with high cis content could be obtained by using α‐norbornenyl macromonomers and highly stable macroinitiators derived from an active norbornene derivative [5‐(2‐bromo‐2‐methylpropionylaminomethyl)bicyclo[2.2.1]hept‐2‐ene (NBBrMPAM)], which was synthesized by the reaction of norbornene methylene amine and 2‐bromo‐2‐methylpropionyl bromide. The α‐norbornenyl macromonomer (NBPMMA), which is polymethyl methacrylate containing norbornenyl end group, was prepared by atom transfer radical polymerization (ATRP) using NBBrMPAM as an initiator. Star‐like polynorbornene with high cis microstructure (cis/trans = 72/28) was obtained directly by ring‐opening metathesis polymerization of NBPMMA macromonomer having number molecular weight (Mn ) as low as 6.39 × 10³. Random ring‐opening metathesis copolymerization of NBPMMA and norbornene derivative containing carbazole group (NBCbz) was carried out at 25 °C by using Ru catalyst [(Cy₃P)₂Cl₂Ru = CHPh, Cy = cyclohexyl, Ph = phenyl]. High cis (cis/trans = 63/37) organo‐soluble star‐like random poly(NBPMMA‐co‐NBCbz) was successfully obtained with high number‐average molecular weight (Mn ) of 4.76 × 10⁴ and molecular weight distribution polydispersity index of 1.78. Organo‐soluble comb‐shaped copolymers with MMA could be successfully obtained using ATRP macroinitiator [poly(HNBBrMPAM)] in diluted macroinitiator solution with a concentration less than 3.64 × 10^?2 mol.L^?1. This is the first ever attempt to prepare novel star‐like organo‐soluble polymeric materials with high cis microstructure via the combination of ring‐opening metathesis polymerization and ATRP. Multimodification could be considered to be carried out by using the functional bromo group at the end of side chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3382–3392, 2006     

Preparation of poly(aryleneethynylene)–type copolymers containing flexible linking methylene units. Optical properties of the copolymers suggesting occurrence of energy transfer between π–conjugated local units

Palladium–catalyzed polycondensation between 2,5–diiodo–3–hexylthiophene I–Th(Hex)–I with mixtures of p–diethynylbenzene HCC—Ph—CCH and α,ω–diethynylalkane HCC(CH₂)_lCCH (l = 3 or 8) gives poly(aryleneethynylene) PAE–type copolymers [CC(CH₂)_lCC—Th(Hex)]_m[CC—Ph—CC—Th(Hex)]_n containing the methylene unit. The copolymers have a molecular weight (M_n) of about 1.2 × 10⁴ as determined by GPC (polystyrene standard) and are considered to possess essentially a random sequences in view of the —CC(CH₂)_lCC— and —CC—Ph—CC— units as judged from their UV–visible spectra. By the incorporation of the (CH₂)_l unit, the λ_max position of the corresponding PAE homopolymer [CC—Ph—CC—Th(Hex)]_n is shifted to a shorter wavelength. However, the copolymers give rise to a photoluminescence PL peak essentially agreeing with a PL peak of the homopolymer, suggesting occurrence of energy transfer in the copolymer. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2201–2207, 1998     

Polypropylene and poly(ethylene‐co‐1‐octene) effective synthesis with diamine‐bis(phenolate) complexes: Effect of complex structure on catalyst activity and product microstructure

A series of group 4 metal complexes bearing amine‐bis(phenolate) ligands with the amino side‐arm donor: (μ‐O)[Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)₂ZrCl]₂ ( 1a ), R₂N(CH₂)₂N(CH₂‐2‐O‐3‐R¹‐5‐R²‐C₆H₂)₂TiCl₂ (R = Me, R¹, R² = tBu ( 2a ), R = iPr, R¹, R² = tBu ( 2b ), R = iPr, R¹ = tBu, R² = OMe ( 2c )), and Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)(CH₂‐2‐O‐C₆H₄)TiCl₂ ( 2d ) are used in ethylene and propylene homopolymerization, and ethylene/1‐octene copolymerization. All complexes, upon their activation with Al(iBu)₃/Ph₃CB(C₆F₅)₄, exhibit reasonable catalytic activity for ethylene homo‐ and copolymerization giving linear polyethylene with high to ultra‐high molecular weight (600·× 10³–3600·× 10³ g/mol). The activity of 1a /Al(iBu)₃/Ph₃CB(C₆F₅)₄ shows a positive comonomer effect, leading to over 400% increase of the polymer yield, while the addition of 1‐octene causes a slight reduction of the activity of the complexes 2a‐2d . The complexes with the NMe₂ donor group ( 2a , 2d , 1a ) display a high ability to incorporate a comonomer (up to 9–22 mol%), and the use of a bulkier donor group, N(iPr)₂ ( 2b , 2c ), results in a lower 1‐octene incorporation. All the produced copolymers reveal a broad chemical composition distribution. In addition, the investigated complexes polymerized propylene with the moderate ( 1a , 2a ) to low ( 2b‐2d ) activity, giving polymers with different microstructures, from purely atactic to isotactically enriched (mmmm = 28%). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2467–2476     

Synthesis and enzymatic degradation of 2‐methylene‐1,3‐dioxepane and methyl acrylate copolymers

Copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and methyl acrylate (MA) containing ester units both in the backbone and as pendant groups were synthesized by free‐radical copolymerization. The influence of reaction conditions such as the polymerization time, temperature, initiator concentration, and comonomer feed ratio on the yield, molecular weight, and copolymer composition was investigated. The structure of the copolymers was confirmed by ¹H NMR, ¹³C NMR, and IR spectroscopy. Differential scanning calorimetry indicated that the copolymers had a random structure. An NMR study showed that hydrogen transfer occurred during the copolymerization. The reactivity ratios of the comonomers were r_MDO = 0.0235 and r_MA = 26.535. The enzymatic degradation of the copolymers obtained was carried out in the presence of proteinase K or a crude enzyme extracted from earthworms. The experimental results showed that the higher ester molar percentage in the backbone caused a faster degradation rate. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2898–2904, 2003     

Synthesis of functional polyethylene <Emphasis Type="Italic">via</Emphasis> copolymerization of ethylene and substituted allene using bis(<Emphasis Type="Italic">β</Emphasis>-enaminoketonato)titanium catalysts

Novel copolymerization of ethylene with substituted allenes（CH₂=C = CH—R,1:R = n-butyl,2:R =n-octyl） using bis（β-enaminoketonato）titanium catalysts[PhN = C（R₂）CHC（R₁）O]₂TiCl₂（1a:R₁ = CF₃,R₂ = CH₃;1b:R₁ = Ph,R₂ = CF₃） has been investigated.In the presence of modified methylaluminoxane,these catalysts can copolymerize ethylene with substituted allenes,affording copolymers with unimodal molecular weight distributions and homogeneous compositions.By varying the reaction conditions,the comonomer incorporation can be tuned in the range of 0-3.6 mol%.¹H-NMR spectra reveal that the copolymerization proceeds through 1,2-insertion fashion of allene comonomer exclusively,and the regioselective nature maintains under various reaction conditions.The retained intra-chain double bond can be converted into the epoxy group under mild conditions.     

Unconstrained geometry complexes: Ethylene/α‐olefin copolymerizations with a tetramethyldisilyl‐bridged Cp‐amido titanium complex

A new disilyl‐bridged complex, [(N‐tert‐butylamido)(3‐indenyl)tetramethyldisilyl]titanium dichloride ( 3 ), was synthesized and activated with methylaluminoxane (MAO) for propylene homopolymerization and ethylene/propylene and ethylene/1‐hexene copolymerizations. A polypropylene with a slight isotactic enrichment was obtained. The number of regioerrors present in the polypropylene was somewhat smaller than that found in most polypropylenes made from monosilyl‐bridged [(N‐tert‐butylamido)(3‐indenyl)dimethylsilyl]titanium dichloride. The regioerrors detected in the copolymers obtained from 3 /MAO were on the order of the amounts observed in polymers made with the monosilyl‐bridged constrained geometry catalysts. Ethylene copolymers of propylene and 1‐hexene had random sequence distributions and showed significant comonomer incorporation. Because of the presence of regioerrors, a modified method for determining the monomer composition and sequence distribution was developed from the direct measurement of the monomer content from the number of methylene and methine carbons per polymer chain, regardless of propylene inversion. An estimate of the error in the copolymerization reactivity ratio determination for regioirregular ethylene/α‐olefin copolymers was obtained by the calculation of the reactivity ratios from monomer dyad sequences, with consideration given to the contribution of major regioirregular sequences. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3840–3851, 2005     

Cationic copolymerization of ε‐caprolactone and L,L‐lactide by an activated monomer mechanism

The cationic homopolymerization and copolymerization of L,L ‐lactide and ε‐caprolactone in the presence of alcohol have been studied. The rate of homopolymerization of ε‐caprolactone is slightly higher than that of L,L ‐lactide. In the copolymerization, the reverse order of reactivities has been observed, and L,L ‐lactide is preferentially incorporated into the copolymer. Both the homopolymerization and copolymerization proceed by an activated monomer mechanism, and the molecular weights and dispersities are controlled {number‐average degree of polymerization = ([M]₀ ? [M]_t)/[I]₀, where [M]₀ is the initial monomer concentration, [M]_t is the monomer concentration at time t, and [I]₀ is the initial initiator concentration; weight‐average molecular weight/number‐average molecular weight ～1.1–1.3}. An analysis of ¹³C NMR spectra of the copolymers indicates that transesterification is slow in comparison with propagation, and the microstructure of the copolymers is governed by the relative reactivity of the comonomers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7071–7081, 2006     

Controlled copolymerization of vinyl acetate with 1‐alkenes and their fluoro derivatives by degenerative transfer

The degenerative transfer copolymerization of vinyl acetate with ethene and higher 1‐alkenes, as well as their fluoro derivatives (R_fCH?CH₂), under mild conditions was carried out using AIBN as the initiator and ethyl iodoacetate as the control agent. The obtained random copolymers were fairly high in alkene content, with high molecular weights and relatively narrow polydispersities. The quasi‐living nature of the copolymerization allowed the synthesis of a block terpolymer by sequential addition of two different 1‐alkene comonomers to a vinyl acetate copolymerization system. The fluorinated side chains of vinyl acetate/fluoro alkene copolymers segregate toward the air‐side of thin films, resulting in advancing water contact angle as high as 114°. 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3728–3736, 2005     

1:2‐sequence‐regulated radical copolymerization of naturally occurring terpenes with maleimide derivatives in fluorinated alcohol

Naturally occurring bulky terpenes, such as (+)‐ and (–)‐limonene and (–)‐β‐pinene, were quantitatively copolymerized with maleimide (MI) derivatives (i.e., phenyl‐, cyclohexyl‐, ethyl‐, and unsubstituted‐MI) in PhC(CF₃)₂OH solvent via selective 1:2‐alternating propagation governed by the penultimate effect, which resulted in 1:2‐sequence regulated polymers with relatively high glass transition temperatures and optical activities. Similar petroleum‐derived bulky olefins possessing cyclohexenyl, cyclohexyl, or additional α‐methyl substituents were copolymerized with phenylmaleimide via preferential 1:2‐alternating propagation with a slightly lower selectivity. A further decrease in the bulkiness of nonpolar olefins increased the 1:1‐alternating sequence. The copolymerization of limonene and acrylonitrile also proceeded approximately via 1:1‐alternating propagation, in which the penultimate effect was less observable. Furthermore, when methylene chloride was used instead of fluorinated alcohol for the copolymerization of limonene and phenylmaleimide, the length of the sequence of MI units increased. Thus, in addition to the characteristic MI skeleton, the bulky and rather specific structure of either limonene or β‐pinene induces 1:2‐selective propagation via the penultimate effect, whereas the fluoroalcohol diminishes the homopropagation of MI via a hydrogen bonding interaction with the MI unit. RAFT copolymerization of limonene and various MI derivatives in PhC(CF₃)₂OH successfully proceeded to give the end‐to‐end 1:2‐sequence‐regulated copolymer with a selective initiating sequence and predominant capping sequence using an appropriate RAFT agent. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Facile synthesis of blocky styrene(1,3)‐butadiene copolymers having stereoregular monomeric sequences

Half titanocenes (CpCH₂CH₂O)TiCl₂ 1 and (CpCH₂CH₂ OCH₃)TiCl₃ 2 , activated by methylaluminoxane are tested in styrene–1,3‐butadiene copolymerization. The titanocene 1 is able to copolymerize styrene and 1,3‐butadiene, with a facile procedure, to give products with high molecular weight. The analysis of microstructure by ¹³C‐NMR reveals that the styrene homosequences in copolymers are in syndiotactic arrangement, while the butadiene homosequences are, prevailingly, in 1,4‐cis configuration, according with behavior of 1 in the homopolymerizations of styrene and 1,3‐butadiene, respectively. The reactivity ratios of copolymerization are estimated by diad composition analysis. All obtained copolymers have r₁ × r₂ values much larger than 1, indicating blocky nature of homosequences. The structural characterization by wide‐angle X‐ray powder diffraction and differential scanning calorimetry indicates that all copolymers are crystalline, with T_m varying from 171 to 239 °C, depending on the styrene content. The titanocene 2 did not succeed in styrene–1,3‐butadiene copolymerization, giving rise to a blend of homopolymers. Compounds 1 and 2 were also tested in the polymerization of several conjugated dienes, and the obtained results were very useful to rationalize the behavior of both catalysts in the copolymerization of styrene and butadiene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 815–822, 2010