手性锌卟啉对咪唑类客体分子识别的构象研究

Chiral recognition is an attractive subject in the area of host-guest chemistry. Conformation study is performed to understand chiral recognition of zinc(Ⅱ) porphyrin with imidazole derivatives on a molecular level. The molecular recognition of three novel chiral zinc porphyrin(1-3) with four types of imidazole derivatives was studied. The conformation searching of this host-guest system was studied by using simulated annealing method on the basis of Tripos force field. The different minimal energy conformation of imidazole combind with porphyrin was studied. The quantum chemistry calculation was performed to calculate the single-point energies of the host-guest system. The minimal energy conformation of ZnT(o-BocAla)APP (3)-Im showed that Im attaching from the single-side chain of the host had the reasonable configuration than that from the three-side chain. The former also had the lower energy than the latter. And the quantum chemistry calculation results of orbital energy, ΔE_L-H, and atomic net charge revealed the same way. The results illumate that combination oriention of the host-guest system is the single chain of the hosts.     

N-烷基壳聚糖玻璃化转变温度的研究

采用差示扫描量热(DSC)法和热释电流(TSC)法研究了N-烷基壳聚糖的玻璃化转变行为. DSC法中采用二次扫描以消除溶剂和热历史的影响, 并利用物理老化方法来增强N-烷基壳聚糖在DSC曲线上的玻璃化转变区域的热焓吸热峰, 以克服DSC法的不灵敏性. 两种研究方法的结果一致表明, 三种N-烷基壳聚糖的玻璃化转变均发生在110～150 ℃温区内；取代的柔性烷基越大, 玻璃化转变温度(Tg)越低；但N-甲基壳聚糖例外, 其Tg略高于壳聚糖, 空间阻碍在这里起决定的作用.     

电感耦合等离子体原子发射光谱法测定工业废水中铅、镉、铬和砷

采用电感耦合等离子体原子发射光谱(ICP-AES)法同时测定工业废水中铅、镉、铬和砷。对仪器的工作参数和被测元素的分析谱线进行了优化和选择。方法的检出限依次为0.008,0.002,0.007,0.015 mg.L-1。在质量浓度为0.489 mg.L-1(Pb),0.086 6 mg.L-1(Cd),0.231 mg.L-1(Cr)及0.395 mg.L-1(As)的水平上按试验方法测定8次,作了精密度试验,测得相对标准偏差值依次为1.71%,1.22%,0.95%及1.40%。在两个废水样品的基础上作了加标回收试验,所得结果在95.4%~104.6%之间。     

手性Salen金属配合物与咪唑类客体分子识别的研究

用光谱滴定法研究了手性Salen金属配合物(SalenFe~(III), SalenCo~(II))与 四种咪唑类客体在CH_2Cl_2中的分子识别行为，发现手性Salen金属配合物与咪唑 ，N－甲基咪唑，2－甲基咪唑的配位数为2，与克霉唑的配位数为1。各识别体系缔 合常数的顺序对SalenFe~(III)为: K(Im) > K(2-MeIm) > K(N-MeIm) > K(GMZ)， 对SalenCo~(II)为：K(Im) > K(2-MeIm) > K(N-MeIm)。测定的识别反应的△ _rG_m~0, △_rH_m~0, △_rS_m~0表明此类识别反应为放热、熵减少的过程，反应 体系存在焓－熵补偿关系。采用分子力学和量子化学方法进行的理论研究对实验结 果作出了合理的解释。     

Influence of Fe2O3 and V2O5 on Crystalline Structure of Mg-Al Spinel Synthesized by Waste Aluminum Slag

Mg-Al spinel is synthesized by using industrial waste-residue and basic magnesium carbonate in the aluminum factory as the main raw materials. The influence of V2O5 and Fe2O3 mineralizers on the structure, cell parameters and microscopic morphology of synthesized Mg-Al spinel has been discussed. The Mg-Al spinel is characterized by using XRD, SEM and relevant analytical software, such as Philips plus, Rietveld quantification and so on. The experimental results show that certain amounts of V2O5 and Fe2O3 are beneficial to the formation of Mg-Al spinel, and the optimum addition of V2O5 and Fe2O3 is respectively 2wt% and 3wt%. V2O5 has few effects on cell parameters of Mg-Al spinel; but Fe2O3 can form solid solution with Mg-Al spinel in which Mg-Fe spinel can also dissolve to form continuous solid solution. Therefore, with the increase of Fe2O3 content, the cell parameters of Mg-Al approximately present linear increase.     

气相色谱-质谱法检测白酒和黄酒中18种邻苯二甲酸酯类增塑剂

建立了白酒和黄酒中增塑剂的液液萃取法提取,气相色谱-质谱法检测技术,内标法定量。考察了基质效应,萃取方法等主要条件,并最终确定正己烷为提取溶剂的液液萃取技术,并且提取过程中加入NaCl和H2O。在优化的条件下,18种增塑剂均具有较好的线性相关性,线性相关系数均大于0.9978,白酒和黄酒的添加回收率、相对标准偏差分别为75.7%~97.5%、2.3%~6.7%和74.8%~96.0%、1.9%~7.1%;检出限均小于0.05 mg/kg。方法可为酒中增塑剂检测的标准方法的建立提供参考。     

The relation between chemical structure of dicarboxylic dihydrazide compounds and nucleation effect in isotactic polypropylene

Journal of Thermal Analysis and Calorimetry - A series of dicarboxylic dihydrazide compounds (DCDH-R-n) were prepared and used as nucleating agents for isotactic polypropylene (iPP). To investigate...     

染料敏化太阳能电池对电极La2Mo2O7复合MWCNTs非Pt催化剂的制备与性能

通过高温固相法对醋酸镧（C₆H₉O₆La·xH₂O）与高钼酸铵（（NH₄）₆Mo₇O₂₄·4H₂O）在一定条件下热解制备非Pt催化剂La₂Mo₂O₇（La₂O₃-2MoO₂）。进一步采用2种方法将La₂Mo₂O₇与多壁碳纳米管（MWCNTs）进行复合,一种是将La₂Mo₂O₇喷涂到MWCNTs表层之上得到La₂Mo₂O₇/MWCNTs,另一种是将两者均匀混合掺杂得到La₂Mo₂O₇@MWCNTs,再将上述2种复合材料应用于染料敏化太阳能电池对电极进行相应研究。通过扫描电子显微镜（SEM）表征了复合催化材料的微观形貌,X射线衍射（XRD）确定了微观结构。采用电流密度-光电压曲线、循环伏安,交流阻抗以及塔菲尔极化分析了材料的光电性能。实验结果表明在电解液I₃^-/I^-中,基于La₂Mo₂O₇/MWCNTs与La₂Mo₂O₇@MWCNTs的对电极,相同的条件下在光电池中获得的光电转换效率分别为6.09%和4.84%,明显高于MWCNTs的3.94%和La₂Mo₂O₇的0.87%。电极性能的提高可归因于La₂Mo₂O₇复合催化剂相对大的比表面积和高导电性。     

高质量NaNdF4六方棱柱纳米棒的水热形貌控制合成及发光性质

采用水热法在温和的条件下合成了具有规则外形的六方棱柱状NaNdF₄纳米棒。X射线衍射（XRD）分析表明：产物为纯六方相NaNdF₄,场发射扫描电镜（SEM）分析表明产物形貌为棱柱状纳米棒,长约为550nm,棒的端部呈规则六边形,边长约为85nm。高分辨透射电子显微镜（HRTEM）和选区电子衍射（SD）显示所得样品为良好的单晶。NaNdF₄晶体的生长动力学过程表明：螯合剂（EDTA-Na₂）与稀土金属离子间的螯合作用受pH值影响,导致成核速度变化,进而影响NaNdF₄纳米晶的最终尺寸和形貌。室温下的NaNdF₄纳米棒的发光峰位于红外光范围（λ=892,1058,和1342nm）,其最强发射峰位于1058nm,对应于Nd³⁺的⁴F_3/2→⁴I_11/2f-f跃迁。     

改性Y型分子筛对FCC汽油脱硫性能的研究

采用液相离子交换法制备了Cu(I)Y、NiY、CeY分子筛,利用XRD、ICP/MS、N₂吸附脱附等技术对其物化性质进行了表征,使用固定床技术和色谱-硫化学发光检测(SCD)偶联技术系统考查了改性Y分子筛对FCC汽油的选择性吸附脱硫性能,着重探讨了FCC汽油选择性吸附脱硫过程中硫化物的脱除规律。结果表明,不同金属阳离子改性的Y分子筛对FCC汽油中不同硫化物选择性有所不同,对CeY分子筛:2-甲基-5-乙基噻吩<噻吩3硫醇< C₂噻吩<2或3-甲基噻吩<苯并噻吩<3,4-二甲基噻吩≈2,3,4-三甲基噻吩<四氢噻吩,而NiY与Cu(I)Y选择性相同:C₃硫醇<2-甲基-5-乙基噻吩2噻吩<2或3-甲基噻吩<噻吩<苯并噻吩<3,4-二甲基噻吩≈2,3,4-三甲基噻吩<四氢噻吩,改性Y分子筛对噻吩及小分子烷基取代噻吩类硫化物的选择性较差。