Terahertz time-domain spectroscopy as a novel tool for crystallographic analysis in cellulose: the potentiality of being a new standard for evaluating crystallinity

Cellulose - Given that terahertz (THz) radiation responds to intermolecular forces such as hydrogen bonds, THz time-domain spectroscopy (THz-TDS) has expanded possibilities in cellulose research....     

A cosolvent pretreatment: effect of solvent–water on enzymatic hydrolysis of glucan,lignin structure,and dynamics

Cellulose - In this study, a biomass pretreatment strategy with a recyclable cosolvent (toluene sulfonic acid/ethanol) was developed. The low boiling point solvent (78.15 °C),...     

基于微流控技术的细胞水平高通量药物筛选系统的研究进展

药物筛选是新药研发的关键步骤,创新药物的发现需要采用适当的药物作用靶点对大量化合物样品进行筛选。高通量筛选系统能够实现数千个反应同时测试和分析,大大提高了药物筛选的实验规模和效率。其中基于细胞水平的高通量药物筛选系统因为更加接近人体生理条件,成为主要的筛选模式。而目前发展成熟的高通量细胞筛选系统主要基于多孔板,存在细胞培养条件单一、耗时费力、试剂消耗量大等问题,且较难实现复杂的组合药物筛选。微流控技术作为一种在微米尺度通道中操纵和控制微流体的技术,具有微量、高效、高通量和自动化的优点,能较好地克服多孔板筛选系统的不足,为构建细胞高通量药物筛选系统提供了一种高效、可靠的技术手段。微流控系统在细胞培养材料、芯片结构设计和流体控制方面均可灵活变化,能更好地实现对细胞生长微环境的调控和模拟。文章综述了基于微流控技术的细胞水平高通量药物筛选系统的研究进展,按照不同的微流体操控模式,对基于灌注流、液滴和微阵列的3种类型的微流控细胞筛选系统进行了分类介绍,并分别总结了它们的优缺点,最后展望了微流控细胞水平高通量药物筛选系统的发展前景,提出了该领域目前存在的问题以及解决问题的方向。     

Implications of Nitrogen Doping on Geometrical and Electronic Structure of the Fullerene Dimers

Because of its unsaturated bonds, C₆₀ is susceptible to polymerize into dimers. The implications of nitrogen doping on the geometrical and electronic structure of C₆₀ dimers have been ambiguous for years. A quarter‐century after the discovery of azafullerene dimer (C₅₉N)₂, we reported its single crystallographic structure in 2019. Herein, the unambiguous crystal structure information of (C₅₉N)₂ is elucidated specifically, revealing that the inter‐cage C—C single bond length of (C₅₉N)₂ is comparable with that of an ordinary C(sp³)‐C(sp³) single bond, and that the most stable conformer of (C₅₉N)₂ is gauche‐conformer with a dihedral angle of 66°. To amend the structural deviations, geometrical structure of (C₅₉N)₂ is optimized by a B3LYP‐D3BJ function, which is proved to be more consistent with its single crystal structure than those by the commonly used B3LYP function. Moreover, the calculation method is also suitable for other representative fullerene dimers, such as (C₆₀)₂ and its divalent anion. Additionally, the dissociation of (C₅₉N)₂ at 473 K under mass spectrometric conditions suggests the inter‐cage C—C bond is relatively weaker than an ordinary C—C single bond, which can be explained by the interaction energies of inter‐cages.     

金属卤化物钙钛矿光电材料和器件

2009年ABX₃钙钛矿晶型的甲胺铅卤CH₃NH₃PbX₃(X=I、Br、Cl)钙钛矿材料首次应用于太阳能电池,但初始报道效率低、稳定性差。2012年后,可溶液法制备的钙钛矿太阳能电池凭借其吸光系数高、激子结合能低等优点,迅速表现出低成本和高效率的突出优势,并在光电器件等交叉领域具有很强的应用潜力。因此,钙钛矿太阳能电池被Science杂志评为2013年度国际十大科技进展,是化学和材料领域特别是光伏领域新兴的变革性技术之一。钙钛矿太阳能电池材料与器件的发展一直面临大面积、高效率、稳定性和环境友好性等挑战,对应的是钙钛矿晶体可控生长、缺陷钝化、器件优化材料稳定性和铅毒性等科学问题。     

Polymer electrolytes—relaxation and transport properties

Relaxations in polymer electrolytes were studied in poly(ethylene oxide) and epoxidized natural rubbers both filled with lithium perchlorate. Impedance relaxation was investigated over a wide range of salt concentration at room temperature. Imaginary part of impedance as a function of frequency exhibits generally one maximum and one minimum. These two extreme values rule properties in the DC limit. They can be related to transport properties and degree of dissociation. It turns out that DC conductivity is dominantly ruled by transport coefficient.     

圆形薄板二维驻波的研究

在理论上和实验上对圆形薄板二维驻波波节图形(克拉尼图形)进行了研究,通过在极坐标下对圆形薄板的竖向小振动方程进行分离变量,求解出圆形薄板小振动方程在自由边条件下的解析解的简正模式,并进行了数值模拟.发现通过调节圆形薄板上点振动源的位置和频率,可精确控制薄板上出现的克拉尼图形.实验上观察到了仅有圆形波节线,仅有辐射状波节线,以及两种波节线同时存在3种情形,且波节线的数量可严格控制.并在此基础上计算了圆形薄板上二维振动的波矢和波速,以及弹性模量等物理量,且理论结果跟实验符合得很好.     

基于双移位器的FLEXIO模拟SPI总线的设计与实现

针对嵌入式系统设计中专用的串行外设接口SPI数量不能满足要求的问题,提出一种基于双移位器的FlexIO来模拟SPI通信总线的全新方案,首先阐述了FlexIO的硬件架构,然后在分析标准SPI通信协议的基础上,通过对其内部定时器,移位器与芯片引脚的合理配置并结合少量的软件编程设计,最终模拟出拥有全双工,同步功能的SPI通信总线。通过与标准SPI从机通信的实验,表明了用FlexIO模拟的SPI通信总线具有硬件配置灵活,软件需求少且通信可靠的优点,同时也对用它来模拟其他类型的串行通信总线提供了一定的参考价值。     

电容式液氢密度计冷冲击性能试验研究

建立了一套电容式液氢密度计冷冲击试验系统,对新研制的密度计传感器和变送器进行液氢工况下的联合调试,研究其在液氢冲击下的数据采集传输转换性能。从理论分析、系统设计、试验验证、数据分析四方面详细阐述了该试验过程。试验结果表明:密度计在液氢下的信号采集传输特性与理论分析特性基本吻合,输出信号正常,实现了该试验预期效果。