A study on melt grafting of maleic anhydride onto low‐density polyethylene and its blend with polyamide 6

Graft copolymerization of low‐density polyethylene (LDPE) with a maleic anhydride (MAH) was performed using intermeshing corotating twin‐screw extruder in the presence of benzoyl peroxide (BPO). The LDPE/polyamide 6 (PA6) and LDPE‐g‐MAH/PA6 blends were prepared in a corotating twin‐screw extruder. The melt viscosity of the grafted LDPE was measured by a capillary rheometer. The grafted copolymer was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microcopy (SEM). The influence of the variation in temperature, BPO and MAH concentration, and temperature on the grafting degree and on the melt viscosity was studied. The grafting degree increased appreciably up to about 0.45 phr and then decreased continuously with an increasing BPO concentration. According to the FTIR analysis, it was found that the amount of grafted MAH on the LDPE chains was ～5.1%. Thermal analysis showed that melting temperature of the graft copolymers decreases with increasing grafting degree. In addition to this, loss modulus (E″) of the copolymers first increased little with increasing grafting and then obviously decreased with increasing grafting degree. Furthermore, the results revealed that the tensile strength of the blends increased linearly with increasing PA6 content. The results of SEM and mechanical test showed that the blends have good interfacial adhesion and good stability of the phase structure, which is reflected in the mechanical properties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 267–275, 2010     

Squeezed flow and heat transfer over a porous surface for viscous fluid

Flow and heat transfer over a permeable sensor surface placed in a squeezing channel is analyzed. A constant transpiration through the sensor surface is assumed. Locally non-similar momentum and energy equations are solved by three different methods, against the transpiration parameter τ, for different values of the squeezing parameter b, and Prandtl number Pr. From the investigation, it is found that when the channel being squeezed, the skin-friction reduces but the heat transfer coefficient increases. Increase in the value of the squeezing parameter onsets reverse flow at the sensor surface when fluid is being injected and the affect is enhanced with the increase of injection through the surface. It is further observed that increase of suction of fluid through the sensor thins the thermal and the momentum boundary layer regions, whereas injection of fluid leads to thickening of both the thermal and the momentum boundary layer regions. Heat transfer from the surface of the sensor increases with the increase of the value of Pr for the entire range of surface mass-flux parameter τ. M. A. Hossain is on leave of absence from University of Dhaka.     

Analytic method for solving coupled nonlinear Schroedinger equations with oscillating terms describing polarized soliton oscillations

Using a variational method, a new model of the nonlinear propagation of optical solitons generated from semiconductor lasers through lossy elliptically low birefringent fiber, is presented within the framework of a system of coupled nonlinear Schroedinger (CNLS) equations with oscillating terms. This analytic model demonstrates polarized soliton oscillations in a lossy elliptically low birefringent optical fiber.     

Landau damping of ion-acoustic waves with simultaneous effects of non-extensivity and non-thermality in the presence of hybrid Cairns-Tsallis distributed electrons

The dispersion properties and Landau damping rate of ion-acoustic waves (IAWs) with the hybrid Cairns-Tsallis distributed (CTD) electrons and Maxwellian ions are investigated using the plasma kinetic model based on Vlasov-Poisson's equations. For both super-extensive (q < 1) and sub-extensive (q > 1) plasmas, the dielectric response function, real frequency, and Landau damping rate of IAWs are derived. By taking the effect of θ_{i, e} (ion-to-electron temperature ratio) into account, it is found that with the increase of ion temperature, the real frequency and wave dispersion effects increase as well (for both super-extensive and sub-extensive cases). Exploring the properties of the Landau damping rate of IAWs with the simultaneous presence of non-thermal parameter α and non-extensive parameter q, a comparison of numerical and analytical results is presented. It is found that in different ranges of θ_{e, i} (electron-to-ion temperature ratio), on decreasing the values of the non-extensive parameter and increasing values of the non-thermal parameter, the weak damping rate is observed (vice versa) in super-extensive or super-thermal plasma, although the trend of the damping rate in sub-thermal plasma is similar (as in the case of super-thermal plasma) but is less weak. It is further revealed that the damping rate of IAWs in thermal plasmas (Maxwellian) is stronger than the damping rate of IAWs in the case of non-thermal plasmas (CTD). The current study is applicable to provide deep insight and further allow the exploration of electrostatic plasma modes in different space and laboratory plasma environments where the hybrid CTD plasma exists.     

A real-time monitoring approach for bivariate event data

Early detection of changes in the frequency of events is an important task in many fields, such as disease surveillance, monitoring of high-quality processes, reliability monitoring, and public health. This article focuses on detecting changes in multivariate event data by monitoring the time-between-events (TBE). Existing multivariate TBE charts are limited because they only signal after an event occurred for each of the individual processes. This results in delays (i.e., long time-to-signal), especially when we are interested in detecting a change in one or a few processes with different rates. We propose a bivariate TBE chart, which can signal in real-time. We derive analytical expressions for the control limits and average time-to-signal performance, conduct a performance evaluation and compare our chart to an existing method. Our findings showed that our method is an effective approach for monitoring bivariate TBE data and has better detection ability than the existing method under transient shifts and is more generally applicable. A significant benefit of our method is that it signals in real-time and that the control limits are based on analytical expressions. The proposed method is implemented on two real-life datasets from reliability and health surveillance.     

A Functionalized Ag2S Molecular Architecture: Facile Assembly of the Atomically Precise Ferrocene‐Decorated Nanocluster [Ag74S19(dppp)6(fc(C{O}OCH2CH2S)2)18]

A ferrocene‐based dithiol 1,1′‐[fc(C{O}OCH₂CH₂SH)₂] has been prepared and treated with a Ag^I salt to form the stable dithiolate compound [fc(C{O}OCH₂CH₂SAg)₂]_n (fc=[Fe(η⁵‐C₅H₄)₂]). This is used as a reagent for the preparation of the nanocluster [Ag₇₄S₁₉(dppp)₆(fc(C{O}OCH₂CH₂S)₂)₁₈] which was obtained in good yield (dppp=1,3‐bis(diphenylphosphino)propane).     

β-Octafluorinated tetrakis(ethoxycarbonyl)porphyrin

Tetrakis(alloxycarbonyl)porphyrin and its β-octafluoro-substituted derivatives were synthesized via Lindsey method and transformed to their zinc complexes.Single crystal X-ray structures of corresponding Zn(Ⅱ) porphyrins revealed that β-octafluorination will give more compactness of porphyrin moieties in the crystal structure owing to the hydrogen bonding interactions involving β-fluorine atoms.An unusual six-coordinated Zn(Ⅱ) was found via intramolecular coordination of oxygen atom of meso-substituents with central Zn(Ⅱ).     

Synthesis,Characterization, and Photoluminescence Properties of Silver(I) Metal‐Organic Polymers with Nanochannels Based on 2‐Sulfoterephthalic Acid and Di(pyridin‐2‐yl)amine Ligands

Two new silver(I) 3D coordination polymers, namely [Ag₃(2‐stp)(dpa)]_n ( 1 ) and {[Ag₂(2‐stp)(H₂O)]?Hdpa}_n ( 2 ) (2‐NaH₂stp=sodium 2,5‐dicarboxysulfonate, dpa=di(pyridine‐2‐yl)amine) were synthesized. The complexes were characterized by elemental analysis, FT‐IR spectra, thermogravimetric analyses (TGA), and single‐crystal X‐ray diffraction. In complex 1 , three neighboring Ag ions are bridged by N‐ and O‐atom, forming a 3D coordination network. The molecular structure of 2 is cation? anion species, forming 3D host? guest supramolecular network with the [Hdpa]⁺ cations encapsulated in the nanochannels. The photoluminescence properties of the complexes were also investigated in the solid state at room temperature.     

Radioactivity of plutonium isotopes, <Superscript>137</Superscript>Cs and their ratio in sediment,seawater and biota from the east coast of Peninsular Malaysia

This study with sampling expeditions of marine sediment, seawater and biota were performed at 30 stations within Malaysian Exclusive Economic Zone (EEZ). A total of >400 samples were collected to determine the activity concentration of anthropogenic radionuclides (^239+240Pu, ¹³⁷Cs) and their activity ratio (^239+240Pu/¹³⁷Cs) in sediments, seawater and biota. The purpose of this study was to determine the concentration levels for these radionuclides and to evaluate any occurrence of radioactive contamination. Sediment cores were obtained using multicorer device, while water samples via co-precipitation techniques and biota was purchased from local fishermen. The activity concentrations of ^239+240Pu in sediment, seawater and biota were ranged 0.21–0.45 Bq/kg dry wt., 2.33–7.95 mBq/m³ and <0.008 Bq/kg fresh wt., respectively. Meanwhile, the values of ¹³⁷Cs were ranged <1.00–2.71 Bq/kg dry wt. in sediment, 3.40–5.89 Bq/m³ in seawater and <0.05–0.41 Bq/kg fresh wt. in biota, respectively. Activity ratios of ^239+240Pu to ¹³⁷Cs obtained seem to confirm that these artificial radioactivities were mainly due to global nuclear fallout.