硫化铟锌的改性合成及光催化特性

随着社会经济的高速发展,能源的短缺和生态的破坏引起了人们的关注。近年来,寻找合适的解决方案已成为关注的重点。作为一种绿色环保技术,光催化由于其高效、低成本等优点而成为能源和环境问题的研究热点。在许多光催化材料中,三元硫化物硫化铟锌(ZnIn₂S₄)由于具有可见光响应特性、简单的制备方法和出色的稳定性而表现出巨大的潜力。然而,较高的载流子复合率限制了其光催化性能。近年来,许多研究报道了改性ZnIn₂S₄以提高其光催化性能,在此,本文详细介绍了各种改性研究,包括ZnIn₂S₄单体的合成、半导体化合物的结构、贵金属沉积、碳元素改性、离子掺杂。然后,系统完整地总结了ZnIn₂S₄在光催化、降解有机污染物、去除六价铬、还原CO₂和有机合成等方面表现出的光催化特性和机理。最后,对ZnIn₂S₄的发展前景提出了展望,以期ZnIn₂S₄光催化剂得到更广泛和深入的研究,尽快在实际生产中得到应用。     

(R)-3-乙酸奎宁环基酯的合成

分别以(R)-3-奎宁环醇与乙酸乙酯的酯交换法和(R)-3-奎宁环醇与乙酸酐的乙酸酐法合成了(R)-3-乙酸奎宁环基酯。通过考察原料摩尔比、催化剂用量、反应时间对产品收率的影响探索了合适的合成工艺。结果表明,乙酸酐法得到的产品收率远远高于酯交换法得到的产品收率,收率最高可达86.1%。     

Catalyst-and additive-free selective sulfonylation/cyclization of 1,6-enynes with arylazo sulfones leading to sulfonylated γ-butyrolactams

A convenient and regioselective sulfonylation/cyclization of 1,6-enynes with arylazo sulfones has been developed to access a series of sulfonylated γ-butyrolactams.The present reaction could be efficiently conducted under catalyst-and additive-free conditions,in which C-S and C-C bonds were selectively constructed in one-pot procedure.     

Superresolution imaging of DNA tetrahedral nanostructures in cells by STED method with continuous wave lasers

DNA tetrahedral nanostructures are considered to be uew nanocarriers because they can be precisely controlled and hold excellent penetration ability to the cellular membrane. Although the DNA tetrahedral nanostructure is extensively studied in biology and medicine, its behavior in the cells with nanoscale resolution is not understood clearly. In this letter, we demonstrate superrcsolution fluorescence imaging of the distribution of DNA tetrahedral nanostructures in the cell with a simulated emission depletion （STED） microscope, which is built based on a conventional eonfocal microscope and can t）rovide a resolution of 70 nm.     

Photocatalytic degradation of trichloroethylene over BiOCl under UV irradiation

In this study, BiOCl samples were synthesized under different pH values and characterized by XRD, SEM, UV‐vis DRS, BET, photoelectrochemical measurement and PL. The photocatalytic performances of the as‐prepared samples were evaluated through the decomposition of trichloroethylene (TCE) under UV irradiation. The influences of several parameters such as solution pH and common inorganic anions on TCE removal were investigated. Results indicated that BiOCl‐0.6 exhibited better photocatalytic performance than BiOCl‐6.0 because of its higher migration ability of photo‐induced carrier. The photocatalytic degradation of TCE over BiOCl‐0.6 followed pseudo first‐order kinetics and appeared to be more efficient in acidic solution than in alkaline. TCE was almost completely dechlorinated in 120 minutes. The inhibiting effect of naturally occurring anions was in the order of HCO₃^‐ >SO₄^2‐ >NO₃^‐, while Cl^‐ exhibited a dual effect. Moreover, BiOCl‐0.6 exhibited superior reusability after three cycles of repetition tests.     

Theoretical and Experimental Study of the Diffraction Intensity of Gradient Refractive-Index Lenses

We develop the wave-optics approach for calculating the diffraction distribution of gradient refractiveindex lenses and observing the diffraction pattern of gradient refractive-index lenses in the experiments. The results of our calculation are in good agreement with the experimental results obtained. We show that the diffraction can be regarded as a method to check the quality of the refractive-index distributions of gradient refractive-index lenses.     

Numerical investigation on dynamic characteristics of drilling shaft in deep hole drilling influenced by minimal quantity lubrication

The dynamic characteristics of drilling shaft in deep hole drilling influenced by minimal quantity lubrication (MQL) is investigated. According to the features of the compressible fluid Reynolds equation in oil/air feature, a time-dependent mathematical model is established to describe the pressure distribution of cutting fluid with nonlinearity in MQL deep hole drilling. By introducing the differential transformation approach, the time-dependent pressure equation arising from cutting fluid is solved by the use of direct integral method. The influences of the rotational speed, the transverse displacement ratio, and radial clearance on the hydrodynamic pressure distribution of cutting fluid are obtained. The advantage of this method is to overcome much of the computational cost and has its rapid convergence rate. Furthermore, the nonlinear responses of drilling shaft influenced by MQL are analyzed, and the instability rotational speeds of drilling tool are discussed while the design parameters of drilling shaft system changing.     

High Carbon-Resistance Ni@CeO<Subscript>2</Subscript> Core–Shell Catalysts for Dry Reforming of Methane

Ni@CeO₂ core–shell catalysts were synthesized via a facile surfactant-assisted hydrothermal method and their catalytic performance in the dry reforming of methane (DRM) reaction was evaluated. A variety of techniques including XRD, N₂ adsorption–desorption, SEM, TEM, TPO, TGA were employed to characterize the prepared or spent catalysts. The encapsulation by the CeO₂ shell, on one side, can restrict the sintering and growth of Ni nanoparticles under harsh reaction conditions. On the other side, compared to the conventional shell material of SiO₂, CeO₂ can provide more lattice oxygens and vacancies, which is helpful to suppress coke deposition. Consequently, the Ni@CeO₂ core–shell catalysts exhibited better catalytic activity and stability in the DRM reaction with respect to the referenced Ni@SiO₂ core–shell catalysts and Ni/CeO₂ supported catalysts.