m-维流形到(m+1)-维流形的零伦浸入的分类

这一节介绍一个引理和有关预备知识.对于拓扑空间 X、Y 而言,我们用[X,Y]表示 X 到 Y 的映射的同伦类组成的集合;[X,Y]'表示 X 到 Y 的保基点的映射的同伦类组成的集合.符号“(?)”表示(根据上下文)群同构或集合间的一一对应.     

表面活性剂对均相沉淀法制备单晶Ce2O(CO3)2￠H2O微粉形貌及 形成机理的影响

在尿素及硝酸铈的混合溶液中分别加入表面活性剂CTAB、 PEG19000、OP-10,利用均相沉淀法合成了不同形貌的CeO2超细前驱体Ce2O(COa)2·H2O,采用X射线衍射及透射电子显微镜等测试手段,对产品的物相和形貌进行了表征．实验结果表明,所得产品均为斜方晶系的单晶Ce2O(CO3)2·H2O,且表面活性剂的加入使晶体的晶化程度明显提高;添加不同的表面活性剂得到不同形貌尺寸的产物: 阳离子型表面活性剂CTAB对Ce2O(CO3)2·H2O晶体的形貌影响不大,所得产物尺寸变小,且分散性得到一定的改善;非离子型表面活性剂对所得产物的形貌影响显著．加入PEG19000和OP-10分别得到了形状排列有序的、尺寸较均匀的、较规则无团聚的微米棒及具有紧密结合中心的发散状的花样微粒．不同形貌前驱体的形成与晶粒形成生长机理的改变有关．     

用于近场集成光学头微透镜器件的灰度掩模技术

讨论了制作适用于近场集成光学头中的凸形、凹形微透镜和折衍射复合微透镜的灰度掩模技术。定性地给出了与几种典型的凸形、凹形微透镜和折衍射复合微透镜对应的灰度掩模版的设计实例 ,以及将它应用于光刻操作的情况 ,为采用灰度掩模技术制作适用于近场集成光学头中的微透镜器件奠定了基础。灰度掩模技术在微透镜器件的制作方面具有重要的应用前景 ,有助于简化制备工艺 ,降低制作成本 ,优化微透镜阵列的结构参数。     

枸橼酸莫沙必利的合成

分别以邻羟基对氨基苯甲醇钠，对氟苯甲醛，邻苯二甲酰亚胺为起始原料，制得3个中间体，用其中2个中间体经偶合，环化后与第3个中间体反应，再经成盐制得产品，其摩尔总收率为31．5％。     

广义凸集的支撑函数

本文讨论了笔者在[1]中提出的伪凸集,拟凸集的支撑函数与障碍锥的性质,并通过这些性质得出了二个闭性准则。     

大规模界约束优化的子空间截断牛顿法

给出了大规模界约束优化的一个子空间截断牛顿法。利用截断牛顿法修正非有效约束所对应的变量，用投影梯度法修正有效约束所对应的变量，文中证明了方法的整体收敛性，并对方法进行了数值试验，且与子空间有限内存拟牛顿法进行了数值比较。     

STUDY ON THE CONFORMATIONAL PROPERTIES OF RIGID POLYELECTROLYTE SPU IN SOLUTION

The conformation and dimension of SPU polyanion have been studied by viscosity and quasi-elastic light scattering methods. The rigidity of SPU is somewhat similar to CMC and its hydrodynamic radius decreases only slowly with increasing concentration of NaCl.     

Effects of Processing Parameters on Microstructure and Properties of Nanoscale ZrC/ZrB2 Multilayered Coatings

ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered coatings possess much higher hardness and greater fracture resistance than monolithic ZrC and ZrB2 coatings. A maximum hardness （41.TCPa） and a critical fracture load （73.7mN） are observed in the multilayer with A = 32 nm deposited at the substrate bias -40 V. Higher residual stress built in the ZrC layer can be released by periodic insertion of ZrB2 into the ZrC layer. A clear multilayered structure with mixed ZrB2（001）, ZrB2 （002） and ZrC （111） orientations should be responsible for the enhanced mechanical properties.     

Effects of target gas in collision-induced dissociation using a double quadrupole mass spectrometer and radiofrequency

Collision-induced dissociation (CID) of polyatomic ions sampled from an rf-powered glow discharge is examined by using three target gases including atomic (Ar and Xe) and molecular species (N2). Collisions with these targets in the first quadrupole of the double quadrupole system result in the loss of discharge species by dissociation, symmetric and asymmetric charge exchange, and scattering, each to varying degrees. These processes are seen to be a function of the relative mass, size... and ionization potentials of the target species, as well as the collision center-of-mass energies. In light of the comparisons, xenon appears to be the best collision target for both CID and charge exchange because of its relatively low ionization potential and high dissociation efficiency of polyatornic species. Evidence for both symmetric and asymmetric charge exchange is presented for Ar and Xe target gases.