We have combined the molecular imprinting and the layer-by-layer assembly techniques to obtain molecularly imprint polymers (MIPs) for the electrochemical determination of p-nitrophenol (p-NPh). Silica microspheres functionalized with thiol groups and gold nanoparticles (Au-NPs) were assembled on a gold electrode surface layer by layer. The electrode was then immersed into a solution of pyrrole and p-NPh (the template), and electropolymerization led to the creation of a polymer-modified surface. After the removal of the silica spheres and the template, electrochemical impedance spectroscopy and differential pulse voltammetry (DPV) were employed to characterize the surface. The results demonstrated the successful fabrication of macroporous MIPs embedded with Au-NPs on the gold electrode. The effects of monomer concentration and scan rate on the performance of the electrode were optimized. Excellent recognition capacity is found for p-NPh over chemically similar species. The DPV peak current is linearly related to concentration of p-NPh in the 0.1 μM to 1.4 mM range, with a 0.1 μM limit of detection (at S/N?=?3).
Figure
Molecularly imprinted polymers (MIPs) and nanomaterials were combined to prepare a novel macroporous structured MIPs based electrochemical sensor for the investigation of an environmental pollutant, p-nitrophenol (p-NPh). The sensor exhibited a fast binding dynamics, good specific adsorption capacities, and high selective recognition to p-NPh. 相似文献
We have combined the molecular imprinting and the layer-by-layer assembly techniques to obtain molecularly imprint polymers (MIPs) for the electrochemical determination of p-nitrophenol (p-NPh). Silica microspheres functionalized with thiol groups and gold nanoparticles (Au-NPs) were assembled on a gold electrode surface layer by layer. The electrode was then immersed into a solution of pyrrole and p-NPh (the template), and electropolymerization led to the creation of a polymer-modified surface. After the removal of the silica spheres and the template, electrochemical impedance spectroscopy and differential pulse voltammetry (DPV) were employed to characterize the surface. The results demonstrated the successful fabrication of macroporous MIPs embedded with Au-NPs on the gold electrode. The effects of monomer concentration and scan rate on the performance of the electrode were optimized. Excellent recognition capacity is found for p-NPh over chemically similar species. The DPV peak current is linearly related to concentration of p-NPh in the 0.1 μM to 1.4 mM range, with a 0.1 μM limit of detection (at S/N = 3).
Mono-dispersed oxide and hydroxide nanoparticles have been synthesized through the solvothermal process in alcohol-water mixtures. The products were characterized by powder x-ray diffraction (XRD) and scanning electron microscopy (SEM). Plate-like nanoparticles are obtained for Bi2O2.33, Fe2O3, and Cd(OH)2, and spherical nanoparticles are obtained for SnO2. The growth mechanism for the mono-dispersed nanoparticles has been preliminarily discussed. 相似文献
This paper presents a Monte Carlo code to get response spectrum of ions for the Neutron Depth Profiling (NDP) technique called Monte Carlo NDP (MC-NDP) that simulates the behavior of ions transmitted through a sample matrix and generates the energy spectrum for a specified detector. The MC-NDP model is based on the Ziegler–Biersack–Littmark Model, but incorporates the advantages of TRIM and CORTEO. The Impulse Approximation method is used to determine the flight length with the indexical interpolation method rather than the Magic algorithm for the scattering angle between ions and nucleus. This makes MC-NDP more efficient and convenient to simulate entire ion histories by a Monte Carlo approach. MC-NDP’s results agree well with both TRIM results and the experimental data. 相似文献
Two hydrophilic conjugated polymers, PmP‐NOH and PmP36F‐NOH, with polar diethanolamine on the side chains and main chain structures of poly(meta‐phenylene) and poly(meta‐phenylene‐alt‐3,6‐fluorene), respectively, are successfully synthesized. The films of PmP‐NOH and PmP36F‐NOH show absorption edges at 340 and 343 nm, respectively. The calculated optical bandgaps of the two polymers are 3.65 and 3.62 eV, respectively, the largest ones so far reported for hydrophilic conjugated polymers. PmP‐NOH and PmP36F‐NOH also possess deep‐lying highest occupied molecular orbital levels of −6.19 and −6.15 eV, respectively. Inserting PmP‐NOH and PmP36F‐NOH as a cathode interlayer in inverted polymer solar cells with a PTB7/PC71BM blend as the active layer, high power conversion efficiencies of 8.58% and 8.33%, respectively, are achieved, demonstrating that the two hydrophilic polymers are excellent interlayers for efficient inverted polymer solar cells.
Kinetics and Catalysis - Using a modified deposition-precipitation method, a series of Au–Mo/ZSM-5 catalysts with different Au loadings were prepared. The XRD, nitrogen adsorption-desorption,... 相似文献
We report a 1.8 μm two-section distributed Bragg reflector laser using butt-jointed In Ga As P bulk material as the waveguide core layer. The threshold current is 17 m A and the output power is 8 m W on average. The threshold current, output power, and emitting wavelength dependences on temperature are measured. The obtained wavelength tuning range is 10 nm. This device has potential applications in simultaneous multiple-gas detection. 相似文献