Unusual multi-step sequential Au(III)/Au(II) processes of gold(III) quinoxalinoporphyrins in acidic non-aqueous media

The electrochemistry of gold(III) mono- and bis-quinoxalinoporphyrins was examined in CH(2)Cl(2) or PhCN containing 0.1 M tetra-n-butylammonium perchlorate (TBAP) before and after the addition of trifluoroacetic acid to solution. The investigated porphyrins are represented as Au(PQ)PF(6) and Au(QPQ)PF(6), where P is the dianion of the 5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)porphyrin and Q is a quinoxaline group fused to a β,β'-pyrrolic position of the porphyrin macrocycle; in Au(QPQ)PF(6) there is a linear arrangement where the quinoxalines are fused to pyrrolic positions that are opposite each other. The porphyrin without the fused quinoxaline groups, Au(P)PF(6), was also investigated under the same solution conditions. In the absence of acid, all three gold(III) porphyrins undergo a single reversible Au(III)/Au(II) process leading to the formation of a Au(II) porphyrin which can be further reduced at more negative potentials to give stepwise the Au(II) porphyrin π-anion radical and dianion, respectively. However, in the presence of acid, the initial Au(III)/Au(II) processes of Au(PQ)PF(6) and Au(QPQ)PF(6) are followed by an internal electron transfer and protonation to regenerate new Au(III) porphyrins assigned as Au(III)(PQH)(+) and Au(III)(QPQH)(+). Both protonated gold(III) quinoxalinoporphyrins then undergo a second Au(III)/Au(II) process at more negative potentials. The electrogenerated monoprotonated monoquinoxalinoporphyrin, Au(II)(PQH), is then further reduced to its π-anion radical and dianion forms, but this is not the case for the monoprotonated bis-quinoxalinoporphyrin, Au(II)(QPQH), which accepts a second proton and is rapidly converted to Au(III)(HQPQH)(+) before undergoing a third Au(III)/Au(II) process to produce Au(II)(HQPQH) as a final product. Thus, Au(P)PF(6) undergoes one metal-centered reduction while Au(PQ)PF(6) and Au(QPQ)PF(6) exhibit two and three Au(III)/Au(II) processes, respectively. These unusual multistep sequential Au(III)/Au(II) processes were monitored by thin-layer spectroelectrochemistry and a reduction/oxidation mechanism for Au(PQ)PF(6) and Au(QPQ)PF(6) in acidic media is proposed.     

Mechanism of trivalent gold reduction and reactivity of transient divalent and monovalent gold ions studied by gamma and pulse radiolysis

The detailed kinetics of the multistep mechanism of the Au(III) ion reduction into gold clusters have been investigated by radiation chemistry methods in 2-propanol. In particular, a discussion on the steady state radiolysis dose-dependence of the yields concludes to a comproportionation reaction of nascent gold atoms Au(0) with excess Au(III) ions into Au(II) and Au(I). This reaction should be achieved through Au(III) consumption before the coalescence of atoms Au(0) into gold clusters may occur. Then gold clusters catalyze the reduction of Au(I) by 2-propanol. It was also found that a long-lived Au(II) dimer, (Au(II))(2), was transiently formed according to the quantitative analysis of time-resolved absorbance signals obtained by pulse radiolysis. Then the disproportionation of Au(II) is intramolecular in the dimer instead of intermolecular, as usually reported. The yields, reaction rate constants, time-resolved spectra, and molar extinction coefficients are reported for the successive one-electron reduction steps, involving especially the transient species, such as Au(II), (Au(II))(2), and Au(I). The processes are discussed in comparison with other solvents and other metal ions.     

Study of nucleation and growth mechanism of the metallic nanodumbbells

We propose a general nucleation and growth model that can explain the mechanism of the formation of CoPt(3)/Au, FePt/Au, and Pt/Au nanodumbbells. Thus, we found that the nucleation event occurs as a result of reduction of Au(+) ions by partially oxidized surface Pt atoms. In cases when Au(3+) is used as a gold precursor, the surface of seeds should be terminated by ions (e.g., Co(2+), Pb(2+)) that can reduce Au(3+) to Au(+) ions, which can further participate in the nucleation of gold domain. Further growth of gold domain is a result of reduction of both Au(3+) and Au(+) by HDA at the surface of gold nuclei. We explain the different ability of CoPt(3), Pt, and FePt seeds to serve as a nucleation center for the reduction of gold and further growth of dumbbells. We report that the efficiency and reproducibility of the formation of CoPt(3)/Au, FePt/Au, and Pt/Au dumbbells can be optimized by the concentration and oxidation states of the surface ions on metallic nanocrystals used as seeds as well as by the type of the gold precursor.     

Structural, electronic, optical, and chiroptical properties of small thiolated gold clusters: the case of Au6 and Au8 cores protected with dimer [Au2(SR)3] and trimer [Au3(SR)4)] motifs

We report results of a theoretical study, based on density functional theory (DFT), on the structural, electronic, optical, and chiroptical properties of small thiolated gold clusters, [Au(n)(SR)(m) (n = 12-15, 16-20; m = 9-12, 12-16)]. Some of these clusters correspond to those recently synthesized with the surfactant-free method. To study the cluster physical properties, we consider two cluster families with Au(6) and Au(8) cores, respectively, covered with dimer [Au(2)(SR)(3)] and trimer [Au(3)(SR)(4)] (CH(3) being the R group) motifs or their combinations. Our DFT calculations show, by comparing the relaxed structures of the [Au(6)[Au(2)(SR)(3)](3)](+), [Au(6)[Au(2)(SR)(3)](2)[Au(3)(SR)(4)]](+), [Au(6)[Au(2)(SR)(3)][Au(3)(SR)(4)](2)](+), and [Au(6)[Au(3)(SR)(4)](3)](+) cationic clusters, that there is an increasing distortion in the Au(6) core as each dimer is replaced by a longer trimer motif. For the clusters in the second family, Au(8)[Au(3)(SR)(4)](4), Au(8)[Au(2)(SR)(3)][Au(3)(SR)(4)](3), Au(8)[Au(2)(SR)(3)](2)[Au(3)(SR)(4)](2), Au(8)[Au(2)(SR)(3)](3)[Au(3)(SR)(4)], and Au(8)[Au(2)(SR)(3)](4), a smaller distortion of the Au(8) core is observed as dimer motifs are substituted by trimer ones. An interesting trend emerging from the present calculations shows that as the number of trimer motifs increases in the protecting layer of both Au(6) and Au(8) cores, the average of the interatomic Au(core)-S distances reduces. This shrinkage in the Au(core)-S distances is correlated with an increase of the cluster HOMO-LUMO (H-L) gap. From these results, it is predicted that a larger number of trimer motifs in the cluster protecting layer would induce larger H-L gaps. By analyzing the electronic transitions that characterize the optical absorption and circular dichroism spectra of the clusters under study, it is observed that the molecular orbitals involved are composed of comparable proportions of orbitals corresponding to atoms forming the cluster core and the protecting dimer and trimer motifs.     

Anodic dissolution of gold in a solution of 1,3-diaminopropane with the formation of a cathodic deposit and a colloidal solution of Au

The corrosion of a Au anode in a solution of 1,3-diaminopropane (DAP) is studied by means of gravimetry. It is found that the products of corrosion of Au electrode in galvanostatic conditions are reduced on a Pt cathode with the formation of either an electrolytic Au deposit or a colloidal solution of metallic Au, depending on the current strength. The kinetics of the dissolution of Au in the presence of DAP is investigated. The formation of a complex of Au with DAP is observed, and a structure for it is proposed.     

Synthesis and electrocatalytic activity of Au/Pt bimetallic nanodendrites for ethanol oxidation in alkaline medium

Gold/Platinum (Au/Pt) bimetallic nanodendrites were successfully synthesized through seeded growth method using preformed Au nanodendrites as seeds and ascorbic acid as reductant. Cyclic voltammograms (CVs) of a series of Au/Pt nanodendrites modified electrodes in 1M KOH solution containing 1M ethanol showed that the electrocatalyst with a molar ratio (Au:Pt) of 3 exhibited the highest peak current density and the lowest onset potential. The peak current density of ethanol electro-oxidation on the Au(3)Pt(1) nanodendrites modified glassy carbon electrode (Au(3)Pt(1) electrode) is about 16, 12.5, and 4.5 times higher than those on the polycrystalline Pt electrode, polycrystalline Au electrode, and Au nanodendrites modified glassy carbon electrode (Au dendrites electrode), respectively. The oxidation peak potential of ethanol electro-oxidation on the Au(3)Pt(1) electrode is about 299 and 276 mV lower than those on the polycrystalline Au electrode and Au dendrites electrode, respectively. These results demonstrated that the Au/Pt bimetallic nanodendrites may find potential application in alkaline direct ethanol fuel cells (ADEFCs).     

Mechanism of gold adsorption by persimmon tannin gel.

Gold adsorption by persimmon tannin (PT) gel from a solution containing hydrogen tetrachloroaurate(III) was examined. A flow-rate examination in a column system indicated the reduction of Au(III) ion to Au(0). XRD patterns clarified the existence of Au(0) on the gel which adsorbed gold. The gel could also adsorb colloidal Au(0) prepared independently. A model consisting of ligand exchange, Au(III) reduction to Au(0), and resulting Au(0) adsorption by PT gel was presented for the gold adsorption mechanism.     

Well-controlled synthesis of Au@Pt nanostructures by gold-nanorod-seeded growth

Pt nanodots were formed on Au nanorods (NRs) by using a simple seed-mediated growth. Their density and distribution on the Au NR can be finely tuned by varying the reaction parameters. At lower Pt/Au ratios, the Pt nanodots mainly appear at endcaps and side edges of the Au rod. At higher Pt/Au ratios, they distribute homogeneously over the whole Au rod. The obtained Pt nanostructure is a single crystal owing to the epitaxial growth of Pt on the Au rod. Due to the unique surface plasmon resonance (SPR) features of the Au NRs, the Au core/Pt shell (Au@Pt) nanostructures also exhibit well-defined and red-shifted longitudinal SPR bands in the visible and near-infrared region. The position and intensity can be regulated by the thickness and amount of the Pt shell. At a thinner Pt thickness, the Au@Pt NRs show higher dielectric sensitivity than the corresponding Au NRs. It thus opens up the potential of Pt nanostructures for SPR-based sensing.     

Synthesis of core/shell nanoparticles of Au/CdSe via Au-Cd bialloy precursor

We present a novel method for the preparation of ultrasmall Au/CdSe core/shell particles. Au-Cd bialloy particles of 4.7 nm diameter were prepared as the precursor. The Cd component in the precursor reacted with the Se source at a temperature of 205 degrees C and was heated to 250 degrees C, leading to formation of a Au/CdSe core/shell structure. The sizes of Au/CdSe nanoparticles have a narrow distribution with an average size of 6.0 nm and Au core of 2.2 nm diameter. The X-ray diffraction pattern and the images of the high-resolution electron transmission microscopy show that the Au cores and the CdSe shells of Au/CdSe core/shell nanoparticles are both well crystallized, and the CdSe shells are in a cubic phase. The absorption spectrum of the Au/CdSe nanoparticles combines the absorption behaviors of the Au cores and the CdSe shells.     

SnO2负载Au和M-Au(M=Pt,Pd)催化剂及其低温催化氧化CO性能

以SnO₂为载体, 采用沉积沉淀法(DP)、共沉淀法(CP)和浸渍法(IM)制备了金负载Au/SnO₂催化剂, 同时采用沉积沉淀法制备了M-Au/SnO₂(M=Pd, Pt)双金属负载催化剂. 通过X射线衍射(XRD)、BET比表面积测定、透射电镜(TEM)和X射线光电子能谱(XPS)等技术对样品进行表征, 并测定其对CO的催化活性. 结果表明: 与CP法和IM 法相比, DP法制备的Au/SnO₂-DP 催化剂, Au 颗粒(<5 nm)较小, 分布均匀; Au/SnO₂-DP 中的Au 是以金属态Au0存在, 而Au/SnO₂-CP 和Au/SnO₂-IM 中, 金以Au⁰和Au³⁺的混合价态存在, 在Au/SnO₂-DP和M-Au/SnO₂中的Au、Pt、Pd和SnO₂之间存在相互作用; Au/SnO₂-DP 催化性能明显优于Au/SnO₂-CP 和Au/SnO₂-IM. Au与Pt 和Pd的双金属复合催化剂催化活性明显提高. 不同方法制备Au/SnO₂催化活性的差别主要是由于Au颗粒大小和Au氧化态的不同而产生. 而M-Au/SnO₂活性提高, 可能是由于Au与Pt 和Pd之间的相互作用.     

金纳米颗粒在不同包裹介质中的超快等离子体动力学

Herein, we prepared four samples, namely gold/poly(sodium-p-styrenesulfonate) (Au/PSS), gold/silicon dioxide (Au/SiO₂), gold/titanium dioxide (Au/TiO₂), and gold/cuprous oxide (Au/Cu₂O) core/shell nanocomposites, to investigate how the surrounding medium affects the ultrafast plasmon dynamics of Au nanoparticles (NPs). We recorded femtosecond transient absorption spectra of Au NPs in Au/PSS, Au/SiO₂, Au/TiO₂, and Au/Cu₂O core/shell nanocomposites at various time delays. We found that the spectral features in the femtosecond transient absorption spectra of Au NPs in Au/TiO₂ and Au/Cu₂O core/shell nanocomposites were dramatically different from those of Au NPs in Au/PSS and Au/SiO₂ core/shell nanocomposites. A comprehensive analysis of the ultrafast plasmon dynamics of Au NPs in the core/shell nanocomposites revealed that following excitation of the resonance plasmon band of Au NPs, the exited electrons could be efficiently transferred into the conduction bands of TiO₂ and Cu₂O in Au/TiO₂ and Au/Cu₂O core/shell nanocomposites.     

Orange luminescence and structural properties of three isostructural halocyclohexylisonitrilegold(I) complexes

The preparation of three isonitrile complexes (CyNC)Au(I)Cl, (CyNC)Au(I)Br, and (CyNC)Au(I)I, along with their structural and spectral characterization, are reported. X-ray crystal structures reveal that these crystallize in the same space group and have closely related structures. The structures involve pleated chains of linear, two-coordinate monomers that are arranged in a head-tail fashion. However, these chains vary significantly in the degree of aurophilic interactions among the individual molecules. Thus, (CyNC)Au(I)Cl forms infinite chains with alternating Au...Au distances of 3.3894(7) and 3.5816(7) A. Within the chains of (CyNC)Au(I)Br, however, the alternation of Au.Au distances is more pronounced so that there are dimers, with an Au.Au distance of 3.4864(9) A, and neighboring gold centers at 3.7036(9) A. In (CyNC)Au(I)I, the gold-gold contacts do not lie within the range of significant aurophilic bonding. The closest Au...Au distance is 3.7182(11) A while every other Au...Au distance is 3.9304(12) A. The steric factor of the X ligand and dipole-dipole interactions between the antiparallel complexes is much more significant than aurophilic interactions in governing the self-association of the complexes in this series. The colorless crystals of each solid display an orange luminescence band with a strikingly large Stokes' shift ( approximately 21000 cm(-)(1), 2.6 eV). However, considerable care had to be taken to ensure that the crystals used for the study of the luminescence were free of a surface impurity that produced a turquoise-green luminescence in (CyNC)Au(I)Cl. The diffuse reflectance spectra for the solids show a similar three-band pattern in the 200-330 nm range.     

Size‐Dependent Surface Migration of Au Alloys on Si Nanowires at Different Cooling Rates

Understanding metal alloy migration in metal‐catalyzed nanowires growth is a prerequisite for improving its potential applications in the field of nanodevices. Here, we explored the surface migration of Au alloys in vertically aligned Si nanowires with different cooling rates. We varied the diameter of Au alloys by controlling the thickness of Au film as a catalyst for SiNW growth, and found that the behavior of Au alloys migration is dependent on size of Au alloys. In addition, the size‐dependent migration mechanism of Au alloys was investigated at different cooling rates, which is related to different Au‐Si eutectics.     

金的化学状态对Au／CoCeOx催化剂CO氧化性能的影响

以CoCeOx复合氧化物为载体,采用沉积沉淀法制备了负载型的金催化剂,并通过不同温度的预处理控制Au的化学状态. 使用粉末X射线衍射、高分辨透射电子显微镜、程序升温还原和X射线光电子能谱对催化剂进行了表征,考察了在室温条件下该系列催化剂的一氧化碳氧化性能. 结果表明, Au/CoCeOx催化剂的CO氧化性能与催化剂表面Au 的含量成正比, Au 可能是反应的主要活性物种. 添加水汽对反应有一定的促进作用,但由于Au 不能稳定存在,特别是当催化剂表面Au 的含量过高时,在水汽的作用下Au 迅速发生歧化反应,使得催化剂的性能下降.     

O与O2在Au团簇上吸附的密度泛函理论研究

采用基于密度泛函理论(DFT)的Dmol³程序系统研究了O原子与O₂在 Au₁₉与Au₂₀团簇上的吸附反应行为. 结果表明: O在Au₁₉团簇顶端洞位上的吸附较Au₂₀强; 在侧桥位吸附强度相近. O与O₂在带负电Au团簇上吸附较强, 在正电团簇吸附较弱. 从O―O键长看, 当金团簇带负电时, O―O键长较长, 中性团簇次之, 正电团簇中O―O键长较短, 因而O₂活化程度依次减弱. 电荷布居分析表明, Au团簇带负电时, O与O₂得电子数较中性团簇多, 而团簇带正电时, 得电子数较少. 差分电荷密度(CDD)表明, O₂与Au团簇作用时, 金团簇失电子, O₂的π^*轨道得电子, 使O―O键活化. O₂在Au₁₉^-团簇上解离反应活化能为1.33 eV, 较中性团簇低0.53 eV; 而在Au₁₉⁺上活化能为2.27 eV, 较中性团簇高0.41 eV, 这与O₂在不同电性Au₁₉团簇O―O键活化规律相一致.     

Preparation of Nanoscrolls by Rolling up Graphene Oxide–Polydopamine–Au Sheets using Lyophilization Method

Graphene oxide–polydopamine–Au (GO–PDA–Au) nanoscrolls were prepared by rolling up GO–PDA–Au sheets through a simple lyophilization method. The structure of GO–PDA–Au nanoscrolls and GO–PDA–Au sheets were compared by powder X‐ray diffraction, Raman spectra, transmission electron microscopy, and scanning electron microscopy. The results demonstrated that the heterogeneous GO–PDA–Au nanoscrolls were synthesized successfully. Polydopamine (PDA) attached at the surface of GO sheets served as binding reagents to anchor and disperse Au nanoparticles (NPs). The electrocatalytic activity of methanol with GO–PDA–Au nanoscrolls and GO–PDA–Au sheets as electrodes were conducted. Compared to GO–PDA–Au sheets, GO–PDA–Au nanoscrolls showed better electrocatalytic activity and electrochemical stability owing to their scrolled structure. This article provides a simple and effective method to prepare GO nanoscrolls containing metal NPs that broadens the applications of the graphene‐based materials in optical, magnetic, and catalytic fields.     

Facile syntheses of monodisperse ultrasmall Au clusters

During our effort to synthesize the tetrahedral Au20 cluster, we found a facile synthetic route to prepare monodisperse suspensions of ultrasmall Au clusters AuN (N < 12) using diphosphine ligands. In our monophasic and single-pot synthesis, a Au precursor ClAu(I)PPh3 (Ph = phenyl) and a bidentate phosphine ligand P(Ph)2(CH2)(M)P(Ph)2 are dissolved in an organic solvent. Au(I) is reduced slowly by a borane-tert-butylamine complex to form Au clusters coordinated by the diphosphine ligand. The Au clusters are characterized by both high-resolution mass spectrometry and UV-vis absorption spectroscopy. We found that the mean cluster size obtained depends on the chain length M of the ligand. In particular, a single monodispersed Au11 cluster is obtained with the P(Ph)2(CH2)3P(Ph)2 ligand, whereas P(Ph)2(CH2)(M)P(Ph)2 ligands with M = 5 and 6 yield Au10 and Au8 clusters. The simplicity of our synthetic method makes it suitable for large-scale production of nearly monodisperse ultrasmall Au clusters. It is suggested that diphosphines provide a set of flexible ligands to allow size-controlled synthesis of Au nanoparticles.     

有序介孔碳CMK-3负载金纳米微粒复合材料的制备和表征

分别采用等体积浸渍-甲醛还原、等体积浸渍-氢气还原及溶胶负载法在介孔碳CMK-3上负载金纳米微粒;利用透射电镜和粉末X射线衍射仪对比分析了采用3种方法得到的复合材料的微结构和相组成;并测定了采用溶胶负载法得到的不同金含量的复合材料的热稳定性.结果表明,所制备的金纳米微粒的尺寸因制备方法不同而呈现明显差异;负载于复合材料中的金纳米微粒具有很好的热稳定性.     

催化剂载体对硼氢化钠在纳米金电极上电氧化行为的影响

分别以中孔炭(MPC)和VXC-72R炭黑作载体,制备了中孔炭载纳米Au粒子(Au/MPC)和VXC-72R炭黑载纳米Au粒子(Au/CB),并将其用作直接硼氢化钠燃料电池阳极电氧化催化剂.分别用X-射线衍射(XRD)、透射电镜(TEM)等比较了不同载体催化剂的结构和形貌.结果表明,纳米Au粒子均为面心立方结构,Au/MPC中纳米Au粒子的粒径为16nm左右比Au/CB中的纳米Au粒子的更小,且均匀分散在载体的表面.用循环伏安曲线和动电位极化曲线等比较了不同载体催化剂的电化学特性.结果表明,Au/CB的电流密度为38.10mA·cm-2,而Au/MPC的电流密度达到42.88mA·cm-2,比Au/CB的电流密度提高了12.5%.     

A key to the storage stability of Au/TiO(2) catalyst

The effect of Au(3+) percentage in Au/TiO(2) on its storage stability at room temperature was studied by varying the drying temperature and storage duration of a deposition-precipitation prepared Au/TiO(2) sample. Carefully-designed room temperature storage in a desiccator, in the dark to exclude any interference of light irradiation, was referenced to the freezing storage (255 K) in a refrigerator. The samples were characterized by well-calibrated H(2)-TPR, TEM and TG measurements. Reduction of Au(3+) ions and agglomeration of metallic Au particles were shown to be the main reasons for the deterioration of Au/TiO(2) during desiccator-storage. Correlating the percentage of Au(3+) ions, determined by H(2)-TPR, with the storage stability of Au/TiO(2) for CO oxidation at 273 K revealed that Au/TiO(2) samples with higher Au(3+) percentages (>90%) were much more stable during the desiccator-storage than those with higher percentages of metallic Au. Residual water in fresh Au/TiO(2) before storage showed a promotional effect on gold reduction and agglomeration during storage. By maximizing the percentage of Au(3+) ions and minimizing the residual water in the fresh sample, the deterioration of the Au/TiO(2) catalyst was successfully avoided during desiccator-storage of up to 150 days in dark. A possible mechanism of Au/TiO(2) deterioration during the desiccator-storage was also discussed.