包覆重钙粉为填充剂的橡胶加工及性能

重钙粉作为填充剂被广泛应用于橡胶加工过程,但由于其表面具有极性,分散性较差,导致与橡胶材料界面结合较差,影响了橡胶产品的抗拉强度、断裂伸长率等力学性能。 本文采用沉淀法,在CaCl₂-H₂O-NH₃-CO₂体系中生成碳酸钙直接结晶于重钙粉颗粒表面,实现对重钙粉的表面包覆,将n(CaCl₂)：n(重钙粉)=1：100、5：100、10：100的包覆重钙粉填充到天然橡胶和再生胶中,橡胶的力学性能与填充未包覆重钙粉的橡胶相比有了一定的提升。 通过比较,在填充量较大(8.5%、15%)时,包覆重钙粉橡胶产品在硬度、定伸应力等力学性能上要好于轻钙粉橡胶产品;在填充量(5%、8.5%)时,包覆重钙粉橡胶产品的抗拉强度、断裂伸长率接近于白炭黑,硬度高于白炭黑橡胶产品。     

蛋白芯片法同时检测食品中克伦特罗与莱克多巴胺的残留量

建立了食品中克伦特罗和莱克多巴胺残留含量同时检测的微阵列蛋白芯片法。结果显示:克伦特罗的线性范围为0.07～1.2 ng/g;莱克多巴胺的线性范围为0.05～0.8 ng/g。猪肉、猪肝中上述两种物质的加标回收率为74%～132%,相对标准偏差均小于10%。将所建立的方法与HPLC-MS方法进行对比,两者检测结果一致。该方法简单、快速、通量高,可用于实际样品中克伦特罗和莱克多巴胺残留量的检测。     

芦丁合钴与DNA相互作用研究

合成了芦丁合钴配合物,通过元素分析、ICP、IR1、H NMR和TG-DTA等手段进行了表征,确定其分子式为[Co3(R t)2(H2O)12](CH3COO)2;运用电化学、吸收光谱、荧光发射光谱等方法研究了配合物与小牛胸腺DNA(CT DNA)的作用机理,并计算了键合常数为2.15×104L.mol-1,实验结果表明芦丁合钴与CT DNA以嵌入模式结合。     

Ni的掺入对复合氧化物LaFeO3的结构及性质的影响

合成子Ｎｉ替代铁酸稀土复合氧化物ＬａＦ３１－ｘＮｉｘＯ３（ｘ＝０．１－０．６），对样品进行了ＸＲＤ、ＩＲ及Ｍｏｓｓｂａｕｅｒ谱测试，结果表明：ｘ＝０＼１，０＼２，０＼３的样品为正交相，ｘ＝０．５，０．６的样品为菱方相；伴随相结构从正交向菱方结构的转变，ＩＲ谱上Ｆｅ（Ｎｉ）－Ｏ键伸振动谱带向高频移动近２０ｃｍ＾－１，Ｍｏｓｓｂａｕｅｒ谱测试表明Ｆｅ均处于＋３自旋态，Ｎｉ离子以＋３价进入晶格。     

Highly Enantioselective Phenylacetylene Addition to Benzaldehyde Catalyzed by Chiral Tridentate Ligand

Development of new or improved methods for the asymmetric preparation of chiral propargylic alcohols has gained considerable significance during the past years because they are useful building blocks for the synthesis of many biologically active compounds and natural products.[1] A series of chiral tridentate ligands were conveniently synthesized from amino acids with good yields (Scheme 1).[2] A preliminary study of the enantioselective alkynylation of benzaldehyde catalyzed by this chiral tridentate ligand was carried out and up to 83% ee of chiral propargyl alcohols was obtained (Table 1 ). A further investigation of the tridentate ligand is currently underway.     

Solid Phase Catalytic Oxidation of Alcohols by Polymer Supported Rare Earth Catalysts

Oxidation of alcohols to the corresponding aldehydes or ketones is one of the most fundamental reactions in organic chemistry [1,2]. Some of the products of the oxidation exhibit an important role in the organic synthesis as well as pharmaceutical synthesis. In most reactions, the lanthanide complexes show satisfied catalytic activities for some compounds. Furthermore, there has been increasing interest in the lanthanide complexes and several reports have appeared in the literature [3, 4]. But the exploitation of these complexes for the oxidation of some organic substrates has been limited. Here we reported a method for the preparation and the catalytic properties as well as the recycling of lanthanide complexes in oxidation of alcohols.The synthetic procedure for the polymer supported lanthanide complexes is shown as following(scheme 1):●-NH2+CICH2COOH(C2Hs)3N→●-NHCH2COOHM=Ce(Ⅲ), Tb(Ⅲ), Sm(Ⅲ)scheme 1The oxidation of benzyl alcohol was carried out in the presence of iodosylbenzene by the polymer supported Ce(Ⅲ), Tb(Ⅲ) and Sm(Ⅲ) catalysts at 80℃ for 4.0h, the yields of benz-aldehyde are as following (table 1):Table 1 Oxidation of benzyl alcohol with the supported catalysts**Reaction condition: benzyl alcohol 0.1 mmol, iodosylbenzene 0.15mmol,catalyst 0.2mg, 80℃ for 4.0h in 1,2-dichloroethane.It can be seen from the table that the Tb(Ⅲ) complex shows higher catalytic activity for the oxidation of benzyl alcohol. Further investigation is now being carded on to optimize the results.     

可分解均衡函数均衡力度分析

证明了惩罚力度越大的均衡函数得到的变权向量构建的变权决策模型越偏于保守;而激励力度越大的均衡函数得到的变权决策模型越偏于乐观,这些结果与均衡函数的原始含义是一致的.最后,详细分析了几类常见的可分解均衡函数的惩罚力度和激励力度随着参数的变化情况.     

化学模拟在反应堆水化学课程中的应用

高温高压化学反应对反应堆设备的可靠性、反应堆性能的控制、核电站运行的安全持久性等具有重要影响，但相关实验难以在高校教学中开展。借助PHREEQC程序及最新热力学数据，建立了反应堆一回路硼酸-氢氧化锂添加配比、腐蚀沉淀物产生及二回路pH控制方案的化学反应模型。运用化学模拟来教学，促进了学生对所学知识的理解与掌握，丰富了现代教学方法。相关模型对核电企业的培训也具有一定参考价值。     

New method to solve electromagnetic parabolic equation

This paper puts forward a new method to solve the electromagnetic parabolic equation （EMPE） by taking the vertically-layered inhomogeneous characteristics of the atmospheric refractive index into account. First, the Fourier transform and the convo- lution theorem are employed, and the second-order partial differential equation, i.e., the EMPE, in the height space is transformed into first-order constant coefficient differential equations in the frequency space. Then, by use of the lower triangular characteristics of the coefficient matrix, the numerical solutions are designed. Through constructing ana- lytical solutions to the EMPE, the feasibility of the new method is validated. Finally, the numerical solutions to the new method are compared with those of the commonly used split-step Fourier algorithm.     

碳化硅量子点荧光标记技术及其生物学应用

通过一步法完成SiC量子点的合成和表面改性,并对其微观结构、光学性质和理化性质进行了表征,结果表明该量子点半径小于激子波尔半径,导致了量子限制效应现象而产生光致发光,通过对其红外光谱的分析发现碳化硅量子点表面既已耦合了巯基,因此该量子点可以作为量子点标记技术中又一种新型的标记材料,然后用SiC量子水相溶液对有、无根皮苷环境下的串珠镰刀菌进行标记并长时程荧光成像,同时让已成功标记的该菌侵染苹果植株幼苗,试验表明,根皮苷能够促进串珠镰刀菌的生长,主要表现在菌落成长的速度和数量上,进一步研究发现,串珠镰刀菌生长态势随周围环境中根皮苷含量的增加而更趋旺盛,此外串珠镰刀菌对苹果幼苗侵染的动态示踪过程表明幼苗的第一感染部位为根毛区.