源气体对沉积的a-C∶F∶H薄膜结构的影响

采用微波电子回旋共振等离子体化学气相沉积(MWPECRCVD)方法,使用不同的源气体(CHF3CH4,CHF3C2H2,CHF3C6H6)体系制备了aC∶F∶H薄膜.由于CH4,C2H2,C6H6气体在等离子体中的分解反应不同导致了薄膜的沉积速率和结构上的差异.红外吸收谱的结果表明,用C6H6CHF3作为源气体沉积的薄膜中几乎不含H,而用C2H2CHF3所沉积的薄膜中的含氟量最高,其相应的CF振动峰位向高频方向偏移.薄膜的真空退火结果表明,aC∶F∶H薄膜的热稳定性除了取决于薄膜的CC键浓度外,还与CC键 关键词： 氟化非晶碳膜 电子回旋共振化学气相沉积 红外吸收光谱     

亚细胞器诱导的2,4,6-三硝基甲苯阴离子自由基的ESR研究

本文在无氧条件下利用ESR分别观察了肝脏和晶状体的微粒体及线粒体酶在NADPH存在下还原三硝基甲苯(TNT)的过程,检测到参数为g=2.0048±0.0005,A_对位~N=1.215mT,A~N=0.800±0.010mT,A~H=0.122±0.0206mT的自由基信号,并通过电子计算机对ESR谱的模拟证明该自由基信号为TNT硝基阴离子自由基,根据其超精细分裂常数认为,其不配对电子的电子云密度主要分布在对位硝基上。     

用Talbot效应及云纹干涉法测试镜面反射体曲率和斜率的灵敏度分析

对用Talbot效应及云纹干涉法测试镜面反射体曲率和斜率的灵敏度进行了分析,同时给出了由于光栅稀密对测试的影响和相应的解释。这对从事这项工作或工程上利用此技术测试物体曲率和斜率提供了一个可行的方案。     

电子束装置运行稳定性的测量

 为了验证电子束装置的稳定性,分别对电流波形、电压波形进行了多次测量,对二极管放电时注入腔中电子均匀性进行了探测,最后改变二极管真空度测量了泵浦氩的荧光 谱的稳定性。     

氢化丁苯共聚物结构的核磁共振波谱表征Ⅰ.13C谱带的归属

本文分别用JEOL FX-90Q和Bruker AM-300波谱仪测定了氢化聚丁二烯和氢化丁苯共聚物的¹H,¹³C-NMR谱,得到了分辨率较高的谱图和新的结构信息。借助DEPT技术确定了各谱带的CH或CH₂类型。利用Grant-Paul和Lindeman-Adams介绍的化学位移经验计算公式,考虑苯基对α、β和γ碳原子的影响,计算了各种三单元序列中有关碳原子的化学位移。对脂肪碳部分的28组谱带重新进行了归属。化学位移计算值与实测值基本相符,并得到了不同组成的模型聚合物¹³C-NMR谱的各谱带强度变化规律的验证。     

一种实现光源与光纤耦合的方法

本文介绍了一种用显微镜筒与透镜构成的光学系统来实现光源与光纤耦合的方法。该方法具有光路系统小巧方便、耐用、耦合效率高等优点。     

Frequent oscillation in a nonlinear partial difference equation

This paper is concerned with a class of nonlinear delay partial difference equations with variable coefficients, which may change sign. By making use of frequency measures, some new oscillatory criteria are established. This is the first time oscillation of these partial difference equations is discussed by employing frequency measures.      

Application of coupling methods to the Neumann eigenvalue problem

Summary By using coupling methods, some lower bounds are obtained for the first Neumann eigenvalue on Riemannian manifolds. This method is new and the results improve some known estimates. An example shows that our estimates can be sharp.Research supported in part by the Foundation of Beijing Normal University     

X-ray evidence for the absence of 90°-domains in polycrystalline PbTiO3 thin films with grains below a critical size

3 thin films is systematically studied by using X-ray diffraction (XRD). The PbTiO₃ thin films with different average grain sizes were prepared on various substrates by a sol-gel process. The films on NaCl and fused glass are randomly grain-oriented, while those on (111)Pt/Ti/SiO₂/Si are highly {100} cubic index grain-oriented . It is found from the XRD patterns of the films on NaCl that with decreasing average grain size from 230 to 80 nm, the intensities of high h index (h>l) peaks (hkl), such as (100), (110), (200), (201), (210), (211), etc., decrease rapidly and ultimately disappear, whereas another set of peaks (lkh), including (001), (002), (102), (112), etc., are still intense. This interesting result suggests that at grain size below a certain critical size an increasing number of grains no longer show 90°-domains, which is confirmed by TEM observations. Meanwhile, X-ray evidence of such a grain-size-related absence of 90°-domains is also found for PbTiO₃ films on Pt(111) and fused-glass substrates. The volume fractions of single-domain grains (without 90°-domains) in the films are estimated from their XRD patterns. By combining SEM and TEM investigations, the critical grain size for the formation of 90°-domains is further determined to be near 200 nm. Received: 19 December 1996/Accepted: 24 March 1997     

Development and applications of an on-line thermal neutron prompt-gamma element analysis system

This paper introduces the principles, instrumentation, implementation, and industrial applications of an on-line thermal neutron prompt-gamma element analysis system (using a²⁵²Cf neutron source, Am–Be neutron source, or neutron generator). The energy resolution of the system at the H prompt-gamma full-energy photopeak (2.22325 MeV) is 3.6 keV. The concentration measurement error of Al₂O₃, FeO₃, CaO, and SiO₂ is ±0.3%, ±0.1%, ±0.4%, and ±0.4%, respectively. The system has been tested on-site at both the Shandong and the Zhengzhou Aluminium Works. Our preliminary on-site measurements confirm that the stability, reliability, measurement range, and accuracy of the system can meet the requirements of the aluminium production process. Facilitation of this measurement at aluminium plants is expected to reduce plant costs by over 3 million dollars annually through reduced energy consumption, more rapid qualification of pulps being mixed during the production process, and in reduced labor costs.Other participants of Shandong and Zhenghou Aluminium Works are: Wang Aili, Zengshen, Dei Jianguo and Lu Jinnan, Wang Deyu, Jin Hequan.