杂多酸催化H_2O/THF或乙醚中三组分一锅煮合成α-胺基膦酸酯(英文)

发现杂多酸是在水/四氢呋喃或乙醚中三组分一锅煮高产率合成α-胺基膦酸酯的有效催化剂.研究了催化剂用量、反应溶剂、醛和胺的结构对反应的影响.     

Growth of Sb(2)E(3) (E = S, Se) polygonal tubular crystals via a novel solvent-relief-self-seeding process

A novel solvent-relief-self-seeding (SRSS) process was applied to grow bulk polygonal tubular single crystals of Sb(2)E(3) (E = S, Se), using SbCl(3) and chalcogen elements E (E = S, Se) as the raw materials at 180 degrees C for 7 days in ethanol solution. The products were characterized by various techniques, including X-ray powder diffraction (XRD), scanning electronic microscope (SEM), transmission electronic microscope (TEM), electronic diffraction (ED), and X-ray photoelectron spectra (XPS). The calculated electrical resistivities of the tubular single crystals in the range 20-320 K were of the order of 10(5)-10(6) Omega cm for Sb(2)S(3) and 10(3)-10(4) Omega cm for Sb(2)Se(3), respectively. The studies of the optical properties revealed that the materials formed had a band gap of 1.72 eV for Sb(2)S(3) and 1.82 eV for Sb(2)Se(3), respectively. The optimal reaction conditions for the growth of bulk tubular single crystals were that the temperature was not lower than 180 degrees C and the reaction time was not shorter than 7 days. The possible growth mechanism of tubular crystals was also discussed.     

γ-[SiW10O36]8-夹心型稀土元素单取代多酸化合物的合成与表征

利用缺位填充法合成了12个γ-[SiW10O36]8-夹心型稀土元素单取代多酸化合物K13[Ln(SiW10O36)2]·nH2O(Ln=La3+,Ce3+,Pr3+,Nd3+,Sm3+,Eu3+,Gd3+,Tb3+,Dy3+,Ho3+,Er3+,Yb3+).通过元素分析确定其组成,由红外光谱、紫外-可见吸收光谱、循环伏安及室温磁化率测定结果确认稀土离子与γ-[SiW10O36]8-相配位;183WNMR及荧光光谱结果则表明,稀土离子处于2个γ-[SiW10O36]8-构成的八配位环境中,标题化合物具有夹心型D2d对称性结构.     

Versatile cobalt complexes for initiating immortal ring‐opening polymerization (ROP) of lactide (LA), mediating living radical polymerization of t‐butyl acrylate (tBA) and catalyzing copolymerization of LA and tBA by combination of ROP and organometallic‐mediated radical polymerization

Low‐cost, highly active and versatile amino‐bis(phenolate) cobalt complexes are developed. The cobalt complexes can control living polymerization of different categories of monomers including lactide (LA) by immortal ring‐opening polymerization in argon and even in air and acrylate via living radical polymerization (LRP). The cobalt‐based catalysts were used for copolymerization of LA and acrylate. The immortal polymerization of LA using the cobalt complexes as initiators proceeds in argon and even in air and without the requirement for extensive drying techniques or inert atmosphere whilst retaining end‐group fidelity. The cobalt complexes are used to mediate LRP of t‐butyl acrylate (tBA) in methanol. The block copolymerization of LA and tBA catalyzed by single‐site cobalt organometallic catalyst is also reported for the first time. This cobalt system offers a versatile and green way to produce homopolymers and block copolymers.     

明胶改性聚醚醚酮微载体的制备、表征及性能

微载体因其具有较高的表面积/体积比等优点可以大大提高哺乳动物细胞培养效率,被广泛应用于生物制药和组织工程等领域。 但微载体多为一次性使用,不耐高温,且主要依赖进口,价格昂贵,因而限制了其国内的应用和推广。 聚醚醚酮(PEEK)材料具有良好的生物相容性、化学稳定性及耐高温等特性,是一种优异的微载体材料,但存在熔点高,加工方法单一和生物惰性等缺陷。 本文以浓硫酸为溶剂,乙醇溶液为萃取剂,采用气流辅助滴注/相分离法,将PEEK制备成448 μm左右,尺寸均匀的微球;经氨丙基三乙氧基硅烷(APTES)处理,获得表面氨基化修饰的PEEK微球(PEEK-N);进一步,以N,N'-羰基二咪唑(CDI)为活性中间体,将明胶分子接枝到PEEK-N微球表面,获得表面明胶修饰的PEEK微载体(PEEK-G)。 对材料的物理化学性质、表面接枝量进行表征;并通过体外细胞实验评估其细胞毒性、细胞粘附效率和细胞增殖能力。 结果显示,通过该方法制备成功了3种不同明胶接枝含量的PEEK细胞微载体(PEEK-G1,PEEK-G2,PEEK-G3),其中明胶含量较高的PEEK-G3毒性最低,细胞粘附和增殖效果最理想。     

Suppression of the Charge Density Wave State in Two-Dimensional 1T-TiSe2 by Atmospheric Oxidation

Two-dimensional (2D) metallic transition-metal dichalcogenides (TMDCs), such as 1T-TiSe₂, have recently emerged as unique platforms for exploring their exciting properties of superconductivity and the charge density wave (CDW). 2D 1T-TiSe₂ undergoes rapid oxidation under ambient conditions, significantly affecting its CDW phase-transition behavior. We comprehensively investigate the oxidation process of 2D TiSe₂ by tracking the evolution of the chemical composition and atomic structure with various microscopic and spectroscopic techniques and reveal its unique selenium-assisting oxidation mechanism. Our findings facilitate a better understanding of the chemistry of ultrathin TMDCs crystals, introduce an effective method to passivate their surfaces with capping layers, and thus open a way to further explore the functionality of these materials toward devices.     

Thermodynamic Limit for Directed Polymers and Stationary Solutions of the Burgers Equation

The first goal of this paper is to prove multiple asymptotic results for a time-discrete and space-continuous polymer model of a random walk in a random potential. These results include: existence of deterministic free energy density in the infinite-volume limit for every fixed asymptotic slope, concentration inequalities for free energy implying a bound on its fluctuation exponent, and straightness estimates implying a bound on the transversal fluctuation exponent. The culmination of this program is almost sure existence and uniqueness of polymer measures on one-sided infinite paths with given endpoint and slope, and interpretation of these infinite-volume Gibbs measures as thermodynamic limits. Moreover, we prove that marginals of polymer measures with the same slope and different endpoints are asymptotic to each other. The second goal of the paper is to develop ergodic theory of the Burgers equation with positive viscosity and random kick forcing on the real line without any compactness assumptions. Namely, we prove a one force–one solution principle, using the infinite-volume polymer measures to construct a family of stationary global solutions for this system, and proving that each of those solutions is a one-point pullback attractor on the initial conditions with the same spatial average. This provides a natural extension of the same program realized for the inviscid Burgers equation with the help of action minimizers that can be viewed as zero temperature limits of polymer measures. © 2018 Wiley Periodicals, Inc.     

内爆驱动式超高速发射技术的初步研究

为获得10 km/s左右的超高速发射能力,以内爆发射器为研究对象,利用AUTODYN 2D软件对口径为8 mm的内爆发射器进行有限元仿真分析,获得了典型状态下的弹丸发射速度。研制了口径为8 mm的内爆发射器,并在压缩管中填充5 MPa氦气进行实验,分别获得了0.55 g铝合金弹丸7.95 km/s和0.37 g镁合金弹丸10.28 km/s的发射速度,与有限元仿真计算结果的速度偏差分别为15.3%和3.7%。结果表明,设计的内爆发射器具备10 km/s发射能力,满足空间碎片撞击和防护研究的超高速发射需求。