A Novel Substrate for in situ Synthesis of Oligonucleotides： Hydrolyzed Microporous Polyamide-6 Membrane

A novel substrate for in situ synthesis of oligonucleotide was prepared by hydrolyzing microporous polyamide-6 membranes in a 0.01mol/L NaOH/(H2O-CH3OH) mixture medium. The formation of amines (NH2) on the surface was proved by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). The treated membrane was applied for in situ synthesis of oligonucleotide and a single step coupling efficiency determined by ultraviolet (UV) spectra was above 98%.     

溶剂热合成具有纳米孔结构的γ-Al2O3

0引言γ-Al2O3又称活性氧化铝,一般具有较高的比表面积,在工业生产中被广泛用作吸附剂和催化剂载体[1],尤其是可作为负载贵金属催化剂的载体[2￣4]。纳米级的γ-Al2O3由于颗粒粒径小而在其颗粒表面形成了丰富的失配键和欠氧键,以此制成多孔薄膜作为催化剂及催化剂载体,其性能比目前使用的同类产品性能要优越许多[5]。但纳米级的γ-Al2O3也存在一些缺点,如由于纳米颗粒的表面能较高导致了颗粒的团聚较严重,分散性较差;由于γ-Al2O3活性较高,所以其高温热稳定性不太好,这些缺点极大地限制了γ-Al2O3的应用范围。因此合成具有良好分散性和…     

苦杏仁挥发油化学成分的微波-同时蒸馏萃取GC-MS分析

报道了用微波照射－同时蒸馏萃取法提取苦杏仁挥发性物质，测得苦杏仁挥发油的含量为4.5%（ω），利用GC－MS法分离确认出18种化学成分，用峰面积归一化法通过化学工作站数据处理系统得出各化学成分在挥发油中的相对含量；其中主要成分为苯甲醛，占总挥发油的89.1%；又用加成分解法分离出苯甲醛，并用IR、EI－MS法对其进行分析鉴定加以确认。     

Catalytic asymmetric borane reduction of prochiral ketones using chiral camphor-derived mercapto-alcohols

Easily available D-(+)-camphor-derived chiral mercapto-alcohols 2 and 3 were employed for catalytic asymmetric borane reduction of aromatic ketones. Moderate enantioselectivities with e.e. 20.2-72.1% were obtained with 10 mol% catalyst. Opposite asymmetric induction was achieved when mercapto-alcohols 2 and 3 were used.     

薄层层析法测定纤维素材料水解液中混合糖的研究

提出了用薄层层析测定纤维素材料水解液混合糖中单糖和各种多糖的含量，以硅胶G为固体吸附剂，以玻璃为支撑物，制成薄层析。以V正丁醇：V37％乙酸：V水＝3：2：2为展开剂，以苯胺－草酸为显色剂，分离效果良好，可完成定性和定量分析任务。     

MELTING AND CRYSTALLIZATION BEHAVIOR OFAN AROMATIC POLY (AZOMETHINE ETHER) WITH NON-LINEARLY SHAPED MOLECULAR CONFORMATIONS

The melting and crystallization behavior have been investigated for an aromatic poly(azomethine ether) with non-linearly shaped molecular conformations. This polymer wasfound to undergo multiple melting processes and its phase transition behavior wasinfluenced sensitively by the thermal history of sample. A significant difference between thepolymer chain aggregation abilities of samples cooled from the different states wasobserved. The possible molecular morphology and aggregation models for describing thestructures of this polymer were proposed and discussed. The crystallization behavior of thesamples cooled from the partially isotropic state and the influence of cooling rate on it havealso been examined with DSC.     

AB_3型超支化聚(酰胺-酯)的合成及缩聚动力学研究

采用丁二酸酐、三羟甲基氨基甲烷为主要原料 ,在冰水浴条件下 ,合成AB3型单体 ,然后进行熔融缩聚制得超支化聚 (酰胺 酯 ) ,没有出现凝胶现象 .采用Fourier变换红外谱仪 (FTIR)、粘度测试、端基分析等方法对其结构、特性粘数进行了表征 .同时对AB3型超支化聚 (酰胺 酯 )的缩聚反应动力学进行了研究 ,得出了130℃、14 0℃和 15 0℃时的缩聚反应速率常数 ,并进一步得出了缩聚反应活化能 .实验结果证明缩聚过程为自催化过程 ,且为三级反应     

STUDY ON THE DETERMINATION OF TRACE Fe（III） BY THIN LAYER RESIN PHASE SPECTROPHOTOMETRY

A method to determine Fe（Ⅲ） by thin layer resin phase spectrophotometry has been developed in this paper. The colored complex formed by Fe（Ⅲ） and 1,2-benzendiol is concentrated on the 717^# resin, then Fe（Ⅲ） can be determined directly by making thin layer. The method is sensitive with a apparent molar absorption of 4.8×10^4L/mol.cm, which is 16 times higher than that of liquid phase spectrophotornetry, most coexisting ions do not influence the determination. The detection limit for Fe（Ⅲ） is 1.47μg/L with the precision of 3.3% [n=6, 7μg/50mL Fe（Ⅲ）]. The calibration curve is linear in the range of 0-25μg/50mL. The preposed method was applied to the determination of Fe（Ⅲ） in water sample with satisfactory results.     

液相OH•, NO3•和SO4•-与二甲基硫反应机理

利用激光闪光光解技术研究了液相二甲基硫(DMS)与OH^•, NO₃^•和SO₄^•-自由基的微观反应机理. 实验结果表明: 在pH 5～9时, OH^•氧化DMS生成DMSOH^•, DMSOH^•会与DMS反应生成(DMS)₂⁺; 而NO₃^•和SO₄^•-;会直接氧化DMS生成DMS^＋, 生成的DMS^＋会与DMS反应生成(DMS)₂⁺.(DMS)₂⁺与氧气的反应很慢, 它的衰减受pH影响较大.     

新型螺旋状一维超分子链配合物的晶体结构(英)

The crystal structure of quasi-one-dimensional compound Ni[S₂CPyrd]₂ (Pyrd=pyrrolidine) has been determined by X-ray diffraction technique. It crystallizes in the monoclinic system, space group P2₁/c, with lattice parameters a=0.631 6(1) nm, b=0.746 5(2) nm, c=1.576 5(4) nm, β=106.08(3)°, and Z=2. The nickel atom had a square-planar geometry. The most prominent feature in the crystal structure is that the bis(pyrrolidinedithiocarbamato) nickel(Ⅱ) forms a well-separated stacking column along the a-axis through supramolecular interaction, and they are uniformly spaced to give a helical one-dimensional chain structure. CCDC: 220648.