Viscoelastic properties of nanostructured natural rubber/polystyrene interpenetrating polymer networks

The effects of the blend ratio and initiating system on the viscoelastic properties of nanostructured natural rubber/polystyrene‐based interpenetrating polymer networks (IPNs) were investigated in the temperature range of ?80 to 150 °C. The studies were carried out at different frequencies (100, 50, 10, 1, and 0.1 Hz), and their effects on the damping and storage and loss moduli were analyzed. In all cases, tan δ and the storage and loss moduli showed two distinct transitions corresponding to natural rubber and polystyrene phases, which indicated that the system was not miscible on the molecular level. However, a slight inward shift was observed in the IPNs, with respect to the glass‐transition temperatures (T_g's) of the virgin polymers, showing a certain degree of miscibility or intermixing between the two phases. When the frequency increased from 0.1 to 100 Hz, the T_g values showed a positive shift in all cases. In a comparison of the three initiating systems (dicumyl peroxide, benzoyl peroxide, and azobisisobutyronitrile), the dicumyl peroxide system showed the highest modulus. The morphology of the IPNs was analyzed with transmission electron microscopy. The micrographs indicated that the system was nanostructured. An attempt was made to relate the viscoelastic behavior to the morphology of the IPNs. Various models, such as the series, parallel, Halpin–Tsai, Kerner, Coran, Takayanagi, and Davies models, were used to model the viscoelastic data. The area under the linear loss modulus curve was larger than that obtained by group contribution analysis; this showed that the damping was influenced by the phase morphology, dual‐phase continuity, and crosslinking of the phases. Finally, the homogeneity of the system was further evaluated with Cole–Cole analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1680–1696, 2003     

互补型自适应滤波器在心磁信号处理中的应用

将心磁信号从干扰噪声中加以提取并有效地消除噪声干扰是心磁信号处理中尤为重要的环节 .从改进算法的角度出发，提出互补型自适应滤波器结构以实现心磁信号的消噪处理.该滤波器针对心磁这类非平稳信号进行设计，有效地解决了常规自适应滤波器应用于心磁信号处理时收敛速度和稳态误差的矛盾.通过仿真实验和心磁实验结果表明，该算法能有效地消除心磁信号的背景噪声和工频干扰噪声.同时该算法也可用于其他非平稳信号的消噪处理. 关键词： 自适应滤波 心磁图 最小均方误差     

神光Ⅱ上柱形黑腔辐射驱动冲击波

利用神光Ⅱ的八路三倍频激光装置，驱动柱形黑腔产生的x 射线作辐射源驱动台阶铝样品产生冲击波，获得了清晰的冲击波图像，通过冲击波过台阶样 品的时间差获得冲击波速度和压力分别为31.2km/s和17.5×10⁵MPa.采用软x射线能谱 仪通过激光注入孔测量的辐射温度与采用冲击波法测量辐射温度的结果一致. 关键词： 冲击波 辐射驱动 辐射温度     

用单一驱动变量同步混沌与超混沌的一种方法

为减少混沌或超混沌同步过程中所需同步信号的个数以及提高同步的效率，提出了用线性可逆变换的方法重组系统，从而使原来不能同步的系统实现了只用单一信号就可同步的目的-另外，也大大提高系统的同步速率- 关键词： 线性可逆变换 混沌和超混沌同步 最大条件Lyapunov指数     

多目标半定规划的互补弱鞍点和G-鞍点最优性条件

对于含矩阵函数半定约束和多个目标函数的多目标半定规划问题，给出Lagrange函数在弱有效意义下的互补弱鞍点和Geofrrion恰当有效意义下的G-鞍点的定义及其等价定义．然后，在较弱的凸性条件下，利用含矩阵和向量约束的择一性定理，建立多目标半定规划的互补弱鞍点和G-鞍点充分必要条件．     

The effect of Mn substitution on thermoelectric properties of Ca3MnxCo4−xO9 at low temperatures

The effects of partial substitution of Mn for Co on the thermoelectric properties of Ca₃Mn_xCo_4−xO₉ (x=0, 0.03, 0.9), prepared by sol-gel process, were investigated at the temperatures from 380 K down to 5 K. The results indicate that the substitution of Mn for Co results in increase in thermopower at temperatures >∼80 K, and substantial (23-31% at 300 K) decrease in lattice thermal conductivity in the whole temperature range investigated. The temperature behavior of ZT suggests that Ca₃Mn_xCo_4−xO₉ with light Mn substitution would be a promising candidate for high-temperature thermoelectric applications.     

A simple low-vacuum environmental cell.

The environmental cell device discussed in this paper provides a modest low-vacuum scanning electron microscopy (SEM) capability to a standard SEM without requiring additional pumping. This environmental cell confines a volume of low vacuum in contact with the sample surface using a container that has an aperture for admitting the primary electron beam. The aperture is large enough to permit a limited field of view of the sample, and small enough to limit the outflow of gas into the SEM chamber to that which can be accommodated by the standard SEM pumping system. This environmental cell also functions as a gaseous detector device.     

Weaving hadamard matrices with maximum excess and classes with small excess

Weaving is a matrix construction developed in 1990 for the purpose of obtaining new weighing matrices. Hadamard matrices obtained by weaving have the same orders as those obtained using the Kronecker product, but weaving affords greater control over the internal structure of matrices constructed, leading to many new Hadamard equivalence classes among these known orders. It is known that different classes of Hadamard matrices may have different maximum excess. We explain why those classes with smaller excess may be of interest, apply the method of weaving to explore this question, and obtain constructions for new Hadamard matrices with maximum excess in their respective classes. With this method, we are also able to construct Hadamard matrices of near‐maximal excess with ease, in orders too large for other by‐hand constructions to be of much value. We obtain new lower bounds for the maximum excess among Hadamard matrices in some orders by constructing candidates for the largest excess. For example, we construct a Hadamard matrix with excess 1408 in order 128, larger than all previously known values. We obtain classes of Hadamard matrices of order 96 with maximum excess 912 and 920, which demonstrates that the maximum excess for classes of that order may assume at least three different values. Since the excess of a woven Hadamard matrix is determined by the row sums of the matrices used to weave it, we also investigate the properties of row sums of Hadamard matrices and give lists of them in small orders. © 2004 Wiley Periodicals, Inc. J Combin Designs 12: 233–255, 2004.     

Low noise double pass L-band erbium-doped fiber amplifier

A new double pass long wavelength band erbium-doped fiber amplifier with enhanced noise figure characteristics is demonstrated. The noise figure is improved by about 2.6 dB with the incorporation of broadband conventional-band fiber Bragg grating (FBG) in between the two segments of erbium-doped fiber. By incorporating both the pre-amplifier and the FBG, the noise figure is further improved, which varies from 4.0 to 5.0 dB in the flat gain region from 1570 to 1600 nm. The gain varies from 32.0 to 33.4 dB within this region. The new amplifier with high gain and low noise figure can be useful as an inline amplifier in a wavelength division multiplexing transmission system.     

4英寸热氧化硅衬底上磁性隧道结的微制备

就如何在4英寸热氧化硅衬底上沉积高质量的磁性隧道结纳米多层薄膜材料和如何利用光刻方法微加工制备均匀性较好的磁性隧道结方面做了初步研究，并对磁性隧 道结的磁电性质及其工作特性进行了初步测量和讨论.利用现有的光刻设备和工艺条 件在4英寸热氧化硅衬底上直接制备出的磁性隧道结，其结电阻与面积的积 矢的绝对误差在10% 以内，隧穿磁电阻的绝对误差在7% 以内，样品的磁性隧道结性质具有较好的均匀性和一致性，可以满足研制磁随机存储器存储单元演示器件的基本要求. 关键词： 磁性隧道结 隧穿磁电阻 磁随机存储器 4英寸热氧化硅衬底