Synthesis of SnO_2 nanorods from aqueous solution:The effect of preparation conditions on the formed patterns

<正>SnO_2 nanorods were deposited on the Si substrates in an aqueous solution containing both SnCl_4 and CO(NH_2)_2.It is found that different self-assembled patterns of SnO_2 nanorods can be obtained by changing the deposition conditions such as the molar ratio of CO(NH_2)_2 to SnCl_4 and the pretreatment of the substrate.Scattered SnO_2 nanorods,for example,can be changed into flower-like patterns when the molar ratio of CO(NH_2)_2 to SnCl_4 is raised,and well-aligned nanorod arrays can be formed when the pretreatment of the substrate is changed.In addition,some interesting patterns,e.g.tree-like patterns,can also be observed.     

Judd--Ofelt analysis of spectra and experimental evaluation of laser performance of Tm3+ doped Lu2SiO5 crystal

This paper reports that the Tm^3＋：Lu2SiO5 （Tm：LSO） crystal is grown by Czochralski technique. The roomtemperature absorption spectra of Tm：LSO crystal are measured on a b-cut sample with 4 at.% thulium. According to the obtained Judd-Ofelt intensity parameters Ω2=9.3155×10^-20 cm^2, Ω4=8.4103×10^-20 cm^2, Ω6=1.5908×10^-20 cm^2, the fluorescence lifetime is calculated to be 2.03 ms for ^3F4 → ^3H6 transition, and the integrated emission cross section is 5.81×10^-18 cm^2. Room-temperature laser action near 2μm under diode pumping is experimentally evaluated in Tm：LSO. An optical-optical conversion efficiency of 9.1% and a slope efficiency of 16.2% are obtained with continuouswave maximum output power of 0.67 W. The emission wavelengths of Tm：LSO laser are centred around 2.06μm with spectral bandwidth of -13.6 nm.     

Optical biosensor with dispersion compensation

Dispersion limits performance in many optical systems. In surface plasmon resonance (SPR) biosensors, the sensing area is an optical element in which the dispersion depends on the effective refractive index of the biochemical compounds to be measured. We report a method of compensating for wavelength dispersion in SPR biosensors employing two integrated diffractive optical coupling elements in a polymer substrate. The dispersion compensation is achieved over the whole dynamic measurement range and provides a biosensor more robust to wavelength fluctuations than prism-coupler SPR systems. The concept can readily be employed in other types of sensor measuring refractive-index changes.     

Simultaneous Packing and Covering in Three-Dimensional Euclidean Space

It is proved that the simultaneous lattice packing and latticecovering constant of every three-dimensional centrally symmetricconvex body is less than or equal to 7/4. Consequently, forany three-dimensional convex body K there is a correspondinglattice packing in which no extra translate of K can be added.     

fcc solid solution alloy films formed in immiscible Fe-Ag system and their mechanical behaviors

Fe-Ag alloy films were deposited by magnetron sputtering. Fe K edge X-ray absorption near-edge structure (XANES) was performed by synchrotron radiation to evidence the structure of the films. Annealing experiments were carried out to study their stability. The hardness and elastic modulus were measured by nanoindentation. The experimental and calculated XANES spectra both reveal that Fe atoms replace part of Ag atoms and supersaturated fcc Ag (Fe) solid solution alloy films are formed up to 38 at.% Fe. The solid solutions are stable and begin to precipitate at 400 °C The elastic modulus increases with the increase of Fe concentration and satisfies the rule of mixtures. The hardness of the as-deposited alloy film is larger than that calculated based on the rule of mixtures. The mechanism responsible for the enhancement of the hardness is discussed in terms of Labusch model of solid solution hardening.     

Single electron transfer‐living radical polymerization of methyl methacrylate catalyzed by ytterbium powder

Zerovalent ytterbium (Yb) powder is firstly used as a catalyst in single electron transfer‐living radical polymerization of methyl methacrylate initiated by carbon tetrachloride in N, N‐dimethylformamide (DMF) and dimethyl sulfoxide, respectively. Polymerization proceeds in a “living”/controlled way as evidenced by kinetic studies and chain extension results, producing well‐defined polymers with controlled degree of polymerization and narrow molecular weight distribution. The apparent activation energy of polymerization in DMF is accounted to be 36.2 kJ/mol, and the energy of equilibrium state is calculated to be 13.9 kJ/mol. An increase in the concentration of Yb(0) yields a higher monomer conversion. It is observed that polymerization rate experiments a rapid increase in the presence of more polar solvent water, and increasing in the content of H₂O results in an increase in the apparent rate constant of polymerization, and a decrease in the molecular weight distribution. The reaction rate and molecular weight increase along with the decrease of DMF content. The effect of Yb(0) powder content, different ligands and concentration of initiator on the polymerization is also investigated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of main‐chain poly(carbazole)s via CuAAC

The synthesis and characterization of a novel family of main‐chain carbazole‐containing polymers using copper‐catalyzed azide‐alkyne cycloaddition chemistry is reported. The reactions were performed under mild conditions using readily available copper catalysts and ligands, which afforded polymeric products with M_ws up to 18 kDa. Using a range of techniques, the polymers were found to exhibit a glass transition temperature (T_g) of 85 °C, high thermal stability (T_d = 274 °C), and high photoluminescent quantum efficiency (?_f = 0.29; λ_em = 448 nm), which underscore their potential for use in organic light‐emitting diodes or other emissive devices, particularly where efficient blue emission is of value. The approach described offers practical advantages over other synthetic methods used to prepare main‐chain carbazole‐containing polymers, especially with regard to the lack of need for rigorously inert conditions and the absence of byproducts generated during the polymerization reaction. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Parameter-setting-free harmony search algorithm

Various phenomenon-mimicking algorithms, such as genetic algorithm, simulated annealing, tabu search, ant colony optimization, and particle swarm optimization, have their own algorithm parameters. These parameters need to be skillfully assigned in order to obtain good results. It is burdensome, especially to novice users, to assign these parameters. The same is true for the harmony search algorithm which was inspired by music performance. Thus, this study proposes a novel technique to eliminate tedious and experience-requiring parameter assigning efforts. The new parameter-setting-free (PSF) technique which this study suggests contains one additional matrix which contains an operation type (random selection, memory consideration, or pitch adjustment) for every variable in harmony memory. Three examples illustrate that the PSF technique can find good solutions robustly.