CdS/SiO2复合材料的低频Raman散射研究

对用溶胶凝胶法制备的ＣｄＳ／ＳｉＯ２复合材料进行低频Ｒａｍａｎ散射研究，结果表明可从其低频Ｒａｍａｎ散射峰位计算出ＣｄＳ微晶的粒径，两种不同的低频振动模式由激发光的两种偏振方向加以区分，低频Ｒａｍａｎ散射射的二级散射峰根据实验结果加以指认，所得平均粒径结果与透射电镜观察结果有较好的对应关系，复合材料吸收光谱吸收边蓝移与ＣｄＳ纳米子粒径之间存在着密切的关系，实验证明，样品吸收边能量与ＣｄＳ平均粒径的     

Syntheses and Studies of PEG-b-PNIPA Block Polymers

ＳｙｎｔｈｅｓｅｓａｎｄＳｔｕｄｉｅｓｏｆＰＥＧ┐ｂ┐ＰＮＩＰＡＢｌｏｃｋＰｏｌｙｍｅｒｓＣＡＯＷｅｉ－ｘｉａｏ＊＊ａｎｄＺＨＡＮＧＴａｏ（ＣｏｌｅｇｅｏｆＣｈｅｍｉｓｔｒｙａｎｄＭｏｌｅｃｕｌａｒＥｎｇｉｎｅｒｉｎｇ，ＰｅｋｉｎｇＵｎｉｖｅｒｓｉｔ...     

激发态Ti＋(3d14s2)与丙炔醇气相反应理论研究

用量子化学密度泛函(DFT)方法研究了激发态Ti^＋(3d¹4s²)与丙炔醇(PPA)气相反应的机理. 在B3LYP/DZVP水平上, 优化了反应的两个通道的反应物、中间体、过渡态和产物的几何构型, 并在MP4/[6-311＋G**(C,H,O)＋Lanl2dz (Ti)]水平上计算了各驻点的单点能量. 为了确证过渡态的真实性, 在B3LYP/DZVP水平上进行了内禀坐标(IRC)计算和频率分析, 获得了二重态反应势能面, 确定了反应机理. 研究结果表明生成产物为[C₃H₃O]^＋和Ti—H的通道是主要反应途径.     

第一性原理计算钛酸铅A位掺杂对其负热膨胀性的影响

近年来,实验发现钛酸铅基材料具有负热膨胀性,且其热膨胀程度会受到掺杂元素的影响. 目前所研究的A位掺杂体系中,仅Cd原子掺杂能使钛酸铅负热膨胀性增强. 所以研究A位掺杂钛酸铅,比较Cd原子与其他原子在掺杂钛酸铅时化学键的异同,有助于深刻理解钛酸铅负热膨胀的本质. 本文利用第一性原理,分别优化了Sr、Ba、Cd掺杂钛酸铅的晶格常数,计算了它们的态密度和电荷密度. 结果表明Cd―O键的共价性强于Pb―O键,而Ba―O键和Sr―O键几乎呈离子性,Ba/Sr对Pb的替代削弱了化合物的共价性,降低了自发极化强度. 与实验测量的热膨胀系数对比可以发现,A位原子与氧原子之间的共价性增强,化合物负热膨胀程度升高;若A位原子与氧原子之间的共价性削弱,负热膨胀程度降低. 可见A位原子与氧原子之间的共价性影响了钛酸铅基化合物负热膨胀性.     

高效液相色谱法测定地顶孢霉培养物中的腺苷

建立测定虫草源饲料添加剂地顶孢霉培养物中腺苷含量的高效液相色谱方法。样品经过研碎、超声处理,离心、过滤后上机测定。腺苷的最佳提取条件:以超纯水为浸提液,用超声波浸提,浸提温度为40℃,浸提时间为55 min。使用Waters Spherisorb ODS2柱(150 mm×3.9 mm,5μm),以甲醇-0.01 mol/L磷酸二氢钾混合液(10∶90)为流动相,流量为1.0 mL/min,进样体积为20μL,检测波长为254 nm。腺苷的质量浓度在0.5~100μg/mL范围内与色谱峰面积成良好的线性关系,相关系数为0.9990。样品测定结果的相对标准偏差为1.65%(n=6),3水平加标的平均回收率为98.19%。该方法简便、快捷,可准确测定虫草饲料添加剂地顶孢霉培养物中腺苷的含量。     

离子液体介导CO2化学转化研究进展

The efficient utilization of carbon dioxide (CO₂) as a C1 feedstock is of great significance for green and sustainable development. Therefore, the efficient chemical conversion of CO₂ into value-added products has recently attracted a lot of research attention in recent years. The transformation of CO₂ generally requires high-energy substrates, specific catalysts, and harsh reaction conditions due to its high thermodynamic stability and kinetic inertness. Consequently, several efforts have been dedicated toward the development of high-performance catalysts and new reaction routes for CO₂ conversion over the last few decades. To date, many routes of convert CO₂ into value-added chemicals have been proposed, together with the development of heterogeneous and homogeneous catalysts. Among the advanced catalysts reported to date, ionic liquids (ILs) have been widely investigated and show great potential for the efficient, selective, and economical conversion of CO₂ into highly valuable products under mild conditions, even under ambient conditions. Some task-specific ILs have been designed with unique functional groups (e.g., —OH, —SO₃H, —NH₂, —COOH, and —C≡N), which can act as the solvent, absorbent, activating agent, catalyst, or cocatalyst to realize the transformation of CO₂ under metal-free and mild conditions. In addition, a variety of catalytic systems composed of ILs and metal catalysts have also been reported for the transformation of CO₂, in which the combination of the IL and metal catalyst is responsible for CO₂ conversion with high efficiency. In this review article, we summarize the recent advances in IL-mediated CO₂ transformation into chemicals prepared via C—O, C—N, C—S, C—H, and C—C bond forming processes. ILs that can chemically capture CO₂ with high capacity are first introduced, which can activate CO₂ via the formation of IL-based carbonates or carbamates, thus realizing the transformation of CO₂ under metal-free and mild conditions. Recent progress in IL-mediated CO₂ transformations to form carbonates and various kinds of N- and S-containing compounds (e.g., oxazolidinones, ureas, benzimidazolones, formamides, methylamines, benzothiazoles, and other chemicals) as well as CO₂ hydrogenation to give formic acid, methane, acetic acid, low-carbon alcohols, and hydrocarbons has been summarized in this review with a focus on the reaction routes, catalytic systems, and reaction mechanism. In these reactions, ILs can simultaneously activate the substrate via strong H-bonding in addition to activating CO₂, and the cooperative effects among the ionic and molecular species and metal catalysts accomplish the reactions of CO₂ with various kinds of substrates to afford a wide range of value-added chemicals. Finally, the shortcomings and perspectives of ILs are discussed. In short, IL-mediated CO₂ transformations provide green and effective routes for the synthesis of high-value chemicals, which may have great potential for a wide range of applications.     

重氮树脂与十二烷基硫酸钠相互作用研究

重氮树脂与十二烷基硫酸钠相互作用研究罗杨磊曹维孝（北京大学化学与分子工程学院北京１００８７１）关键词重氮树脂，十二烷基硫酸钠，负性ＰＳ版随着化学与生命科学领域的发展，大分子与小分子在溶液的相互作用越来越受到关注．表面活性剂因其具有自组装能力，...     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

高灵敏分光光度法测定全血铁

为建立一种快速、简便、灵敏的分光光度法测定全血中微量铁,在非离子型表面活性剂聚氧乙烯月桂醚(Brij-3 5 )及聚氧乙烯异辛基苯基醚(TritonX -1 0 0 )存在下,用2 (5 硝基2 吡啶偶氮) 5 [N 正丙基 N (3 磺酸丙基)氨基]苯酚二钠(简称Nitro -PAPS)作显色剂直接光度法测定全血中微量铁。结果表明,该法在pH 4 0的乙酸乙酸钠缓冲液中,以5 90nm为测定波长,可直接测定全血中微量铁,本法线性范围为0～2 2 7μg/mL ,表观摩尔吸光系数为9 97×1 0 4L/(mol·cm) ,回收率为97 5 %～1 0 1 8%。结论:该法具有操作快速、简便、结果灵敏可靠等优点,适合临床医疗、预防保健等应用,值得推广。     

First Total Synthesis of (±)-Aiphanol

Aiphanol was isolated from the seeds of Aiphanes aculeate Willd. (Arecaceae) collected in Peru and was reported to exhibit significant inhibitory activities against cyclooxyge- nases-1 and -2. The structure of aiphanol was elucidated by spectroscopic methods as an unprecedented stilbenolignan skeleton in which a stilbene moiety is linked to a phenylpropane unit through a dioxane bridge1. In our previous works the synthetic approach to 1,4-benzodioxane lignans were achieved2. Since aiphanol…