氘代甲基萤火虫荧光素的全合成

以2-氰基-6-甲氧基苯并噻唑为原料,经脱甲基、氘甲基化,与D-半胱氨酸盐酸盐水合物反应合成了新化合物——氘代甲基萤火虫荧光素,总收率46%,对映选择性100%,其结构经1H NMR,FT-IR和MS表征。     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

Research Progress of Regulation of Driving Forces in Short Peptide Supramolecular Self-Assembly北大核心CSCD

Some short peptides can spontaneously self-assemble into various nanostructures via the synergistic driving forces of non-covalent interactions. These non-covalent interactions,including electrostatic interaction,hydrogen bonding,aromatic interactions and other non-covalent interactions,are usually highly coupled together. Through rational sequence design and proper modification of short peptide molecules,the driving forces could be regulated purposively,and the nanostructures and morphologies of the self-assemblies could be controlled accordingly,and thus so as to achieve the fabrication of peptide-based supramolecular biomaterials and develop their functions. In this paper,the effects of hydrogen bonding,π-π stacking, electrostatic interaction,hydrophobic interaction,metal ion coordination and chiral center on the self-assembly behavior of peptide self-assembly have been reviewed. The driving force regulation strategies, including sequence design,pH and concentration adjustment and metal ion coordination,and the resulted nanostructures have also been discussed. We also make the outlooks on the development of peptide-based supramolecular biomaterials with specific functions in biomedicines and biocatalysis. © 2022, Science Press (China). All rights reserved.     

甲基苯基乙烯基硅橡胶电离总剂量效应

甲基苯基乙烯硅橡胶具有耐高低温、防震等独特优势,在航天器的减震、密封等领域具有广泛应用前景。研究了甲基苯基乙烯基硅橡胶的电离总剂量效应。结果表明,随着辐射剂量的增加,甲基苯基乙烯基硅橡胶的力学性能出现了不同程度的退化。拉伸强度和撕裂强度变化规律以1×106 Gy(Si)剂量点为分界点。低于该剂量,拉伸和撕裂随剂量增加快速下降;高于该剂量时,随辐照剂量增加,拉伸强度出现一定程度反弹,呈现出宽"U"形,而撕裂强度则是先增加后下降。拉断伸长率和邵氏硬度A随辐照剂量增加分别出现快速下降和增加,最终接近饱和。最后,从辐射交联和裂解方面讨论了甲基苯基乙烯基硅橡胶电离总剂量效应的潜在物理机制。     

Fast parallel algorithm for three-dimensional distance-driven model in iterative computed tomography reconstruction

The projection matrix model is used to describe the physical relationship between reconstructed object and projection.Such a model has a strong influence on projection and backprojection,two vital operations in iterative computed tomographic reconstruction.The distance-driven model(DDM) is a state-of-the-art technology that simulates forward and back projections.This model has a low computational complexity and a relatively high spatial resolution;however,it includes only a few methods in a parallel operation with a matched model scheme.This study introduces a fast and parallelizable algorithm to improve the traditional DDM for computing the parallel projection and backprojection operations.Our proposed model has been implemented on a GPU(graphic processing unit) platform and has achieved satisfactory computational efficiency with no approximation.The runtime for the projection and backprojection operations with our model is approximately 4.5 s and 10.5 s per loop,respectively,with an image size of 256×256×256 and 360 projections with a size of 512×512.We compare several general algorithms that have been proposed for maximizing GPU efficiency by using the unmatched projection/backprojection models in a parallel computation.The imaging resolution is not sacrificed and remains accurate during computed tomographic reconstruction.     

三维荧光法测定水中的4-氯苯酚

对三维荧光法测定水中的4-氯苯酚进行了研究,并与传统的比色法进行了比较。4-氯苯酚的三维荧光光谱图中荧光特征峰位于λex/λem=280 nm/310 nm处,在pH 1~8时,荧光较强且稳定。4-氯苯酚质量浓度为0.01~2.0 mg/L时,荧光强度与浓度的线性相关系数R2为0.9997,检出限为0.0096 mg/L。方法可用于自来水及地表水中的4-氯苯酚的测定,回收率在94.3%~106.0%。     

过渡金属氧化物掺杂对铜锰氧化物催化CO氧化性能的影响

以乙酸铜和乙酸锰为铜锰前驱体,以NH4HCO3为沉淀剂,相应金属硝酸盐为掺杂剂,采用共沉淀法制备了不同过渡金属氧化物掺杂的铜锰氧化物催化剂.采用N2物理吸附、X射线衍射,氢气-程序升温还原和原位红外漫反射光谱等方法对催化剂进行了表征,考察了系列催化剂上CO反应性能.结果表明,掺杂过渡金属氧化物可以调变催化剂对CO的吸附能力,进而影响催化剂性能.     

一种红光发射的粘度荧光探针

以三苯胺和苯并噻唑盐为原料,设计合成了一种具有红光发射特性的D-π-A型荧光粘度探针N-乙酸乙酯基-2-(4-甲酸甲酯基三苯胺-4'-乙烯基)苯并噻唑六氟磷酸盐(L),运用现代分析测试手段进行了系统地表征。 研究结果表明,探针L的最大发射波长为630 nm,能有效地降低生物背景,提高生物成像的信噪比。 该探针对粘度有很好的荧光响应,其荧光强度比值(I/I₀)的对数与粘度的对数呈现很好的线性关系(R²=0.9934)。 此外,探针L对极性的敏感性小,且荧光信号不受生物分子的干扰。 生物学研究结果表明,探针L具有低的细胞毒性,可应用于细胞内微环境粘度的荧光成像。     

高考中一类静电场题剖析

剖析高考中一类静电场题的出题特点,以此帮助学生从不同角度认识同、异号点电荷的连线和垂线上场强和电势分布特征.     

Light scattering of nanocrystalline TiO2 film used in dye-sensitized solar cells

This paper studies the light scattering and adsorption of nanocrystalline TiO2 porous films used in dye-sensitized solar cells composed of anatase and/or rutile particles by using an optical four-flux radiative transfer model. These light properties are difficult to measure directly on the functioning solar cells and they can not be calculated easily from the first-principle computational or quantitative theoretical evaluations. These simulation results indicate that the light scattering of 1 25 nm TiO2 particles is negligible, but it is effective in the range of 80 and 180 nm. A suitable mixture of small particles （10 nm radius）, which are resulted in a large effective surface, and of larger particles （150 nm radius）, which are effective light scatterers, have the potential to enhance solar absorption significantly. The futile crystals have a larger refractive index and thus the light harvest of the mixtures of such larger rutile and relatively small anatase particles is improved in comparison with that of pure anatase films. The light absorption of the 10μm double-layered films is also examined. A maximal light absorption of double-layered film is gotten when the thickness of the first layer of 10 urn-sized anatase particles is comparable to that of the second larger rutile layer.