Fabrication and Characterization of Ni Thin Films Using Direct-Current Magnetron Sputtering

Ni films are deposited by using ultra high vacuum dc magnetron sputtering onto silicon substrates at room temperature, and the high-quality and high-density films are prepared. The parameters, such as thickness, density and surface roughness, are obtained by using small-angle x-ray diffraction (XRD) analyses with the Marquardt gradient-expansion algorithm. The deposition rate is calculated and the Ni single layer can be fabricated precisely. Based on the fitting results, we can find that the surface roughness of the Ni films is about 0.7nm, the densities of Ni films are around 97% and the deposition rate is 0.26nm/s. The roughness of the surface is also characterized by using an atomic force microscope (AFM). The changing trend of the surface roughness in the simulation of XRD is in good agreement with the AFM measurement.     

线性加指数效用函数的组合投资研究

应用无差异曲线法较好地解决了在投资决策分析中具有特殊重要地位的线性加指数效用函数的最优组合投资比例的求解问题,并给出实例予以说明.     

n~(n 1)与(n 1)~n谁大?

学生曾问我“20022003与20032002谁大?”,他钻研后认为n(n 1)与(n 1)n(n∈N)当n取较小的值时,有时前者比后者小,有时前者比后者大,当n取较大的值时,又不好证明,这引起了我们的研究兴趣。     

平面上Volterra型随机微分方程解的轨道惟一性

In this paper we prove the pathwise uniqueness of a kind of two-parameter Volterra type stochastic differential equations under the coefficients satisfy the nonLipschitz conditions. We use a martingale formula in stead of Itǒ formula, which leads to simplicity the process of proof and extends the result to unbounded coefficients case.     

电爆炸箔断路开关的理论和实验研究

电感储能型脉冲功率调制器中的一个关键部件是断路开关。电爆炸金属丝（箔）断路开关是使用最广泛的一种。为了给今后开展更高功率断路开关研究奠定基础，开展了电爆炸箔断路开关的理论和实验研究。     

寻找规律解赛题

在线段AB上,先在A点标注0,在B点标注2002,这称为第一次操作;然后在AB中点为C处标注0+2002/2=1001,称为第二次操作;又分别在得到的线段AC、BC的中点D、E处标注对应线段两端所标注的数字和的一半,即0+1001/2与1001+2002/2,称为第三次操作;照此下去,经过11次操作之后,在线段AB上所有标注的数字和是多少? 首先,寻找标注数字的规律.为了寻找规律,设B点标注的数字为m,则:     

Time-Resolved Femtosecond Degenerate Four-Wave Mixing in LiNbO3：Fe,Mg Crystal

Forward degenerate four-wave mixing （DFWM） processes are investigated with a femtosecond pulsed laser in lithium niobate crystal doubly-doped with magnesium and iron （LiNbO3：Fe, Mg）. The pulse energy dependence reveals a pure third-order nonlinear response, and the third-order nonlinear susceptibility x^（3） in the material is evaluated to be 4.96 × 10^-13 esu. The time-resolved DFWM process shows a response time of x^（3） shorter than 100fs, which is due to the nonresonant electronic nonlinearities. Our results indicate that LiNbO3 crystals have potentials for ultrafast real-time optical processing systems, which require a large and fast x^（3） optical nonlinearity.     

Experimental 511 W Composite Nd：YAG Ceramic Laser

We demonstrate a 511 W laser diode pumped composite Nd：YAG ceramic laser. The optical pumping system is consisted of five laser diode stacked arrays arranged in a pentagonal shape around the ceramic rod whose size is φ6.35×144mm. When the pumping power is 1600 W, the cw laser output up to 511 W at 1064nm can be obtained with a linear piano-piano cavity, and the optical-to-optical efficiency is 31.9%. To our knowledge, this is the highest value of laser output by using a newly invented composite Nd：YAG ceramic rod as the gain medium.     

基于TMS320VC5416的计算装置设计

TMS320VC5416是TI公司生产的一款低功耗高性能：定点16位数字信号处理器，工作频率可达150MHz，具有很强的数字信号处理能力。采用基于TMS320VC5416的数字处理装置能够完成较复杂的数据采集、传输、处理和仿真通信功能。经过不断调试并改进，该计算装置在下面两方面取得初步成效。