荧光性多孔芳香骨架材料的简便制备 及在硝基爆炸物检测中的应用

报道了一种简便的制备高荧光性多孔有机聚合物材料的方法, 即以1,3,6,8-四溴芘(TBrPy)与硼酸类单体为构筑基元, 通过Suzuki偶联反应制备多孔芳香骨架材料LNUs. 利用傅里叶变换红外光谱、 热重分析、 氮气吸附、 固体紫外光谱和荧光光谱等分析方法对其结构与性能进行了系统表征. 分析结果表明, 该类多孔芳香骨架材料具有良好的热化学稳定性和较大的比表面积, 所得材料优异的荧光性能使其非常适合用于硝基爆炸物的选择性检测. 多孔芳香骨架材料LNUs在苯、 溴苯、 苯胺、 甲苯、 氯苯和苯酚等分子存在下, 荧光强度基本不变, 而在加入硝基苯、 对硝基苯酚和对硝基氯苯后, 荧光几乎完全猝灭, 说明该类材料对硝基苯、 对硝基苯酚和对硝基氯苯显示出专一的检测性能. 根据这一特性, 利用LNUs材料制备了一种新型便携式纸传感器, 其可以简便快速实时检测硝基爆炸物, 并在痕量检测方面展现出良好的应用前景.     

多孔有机聚合物材料的合成与荧光传感应用

多孔有机聚合物荧光材料既具有孔隙度高的特点,也具有突出的荧光性能.当其骨架上存在与特定分析物(如硝基芳香爆炸物、金属离子、阴离子等)的结合位点时,便赋予其荧光传感的功能.按照不同多孔有机聚合物(POPs)材料的类型,即无定型的多孔有机聚合物材料、晶型含配位键的多孔金属有机框架(MOFs)材料、晶型共价有机框架(COFs)材料,综述了近年来多孔有机聚合物荧光材料的研究新进展,特别是它们基于有机功能分子的设计与合成,及其荧光传感应用.继续从分子层面设计新型的荧光COFs材料是未来可循环使用的高效荧光化学传感器的发展方向,值得关注.     

一锅法Suzuki-Heck反应构筑基于4-乙烯基苯硼酸的发光多孔有机聚合物

多孔有机骨架材料是近年来出现的一类具有较大的比表面积、孔尺寸小于2 nm的多孔有机聚合物材料. 这些材料由较轻质量的C、H、O、N、B等元素组成, 与常规的微孔材料如分子筛和金属-有机骨架化合物相比, 它们具有较低的骨架密度和较高的比表面积等优点. 在本文中, 我们选择4-乙烯基苯硼酸为底物, 通过与芳基卤代物的Suzuki-Heck反应, 发展了一种基于钯催化的一锅法合成发光多孔有机聚合物的新途径. 红外光谱和固体¹³C核磁研究表明, 4-乙烯基苯硼酸在聚合过程中与芳基卤代物之间的Suzuki-Heck反应进行较为完全. 氮气等温吸附曲线表明, 这类材料具有多孔的性质, BET比表面积最高可达552 m²·g^-1. 由于聚合物中存在有较大的共轭基团, 因此具有良好的发光性质. 我们对这些发光有机多孔聚合物在荧光检测硝基化合物方面的应用进行了初步研究, 发现它们对苦味酸(2,4,6-三硝基苯酚)具有良好的选择性检测能力.     

爆炸物检测用荧光聚合物材料

作为荧光传感材料,荧光聚合物不仅具有传感单元多、荧光亮度高、光稳定性好等特点,而且方便制备荧光传感薄膜,易于实现器件化,在爆炸物荧光检测中得到了广泛的研究与应用。近年来,随着荧光聚合物从传统的线型结构向支化和多孔网络结构的拓展,以及各种功能单元的引入,大量的新型荧光聚合物有效地提升了爆炸物检测的灵敏度、选择性和响应速度等性能。本综述从线型聚合物、支化聚合物、多孔聚合物三类体系出发,总结和评述了用于爆炸物荧光检测的线型共轭与非共轭聚合物、树枝状分子与超支化聚合物、无定形与结晶型多孔聚合物等典型体系的分子结构设计策略、功能特点以及传感性能,并展望了荧光聚合物未来在爆炸物检测应用中所面临的机遇和挑战。     

磷酸基多孔芳香骨架材料用于提取铀离子

采用联苯为建筑基元，合成了价格低廉、操作简便、易于工业化的多孔芳香骨架材料PAF-45.通过后修饰方法，制备了带有磷酸基团的多孔芳香材料（PAF-45-PG）.通过FTIR（傅里叶变换红外光谱），TGA（热重分析），PXRD（多晶粉末X射线衍射），SEM（扫描电子显微镜），TEM（透射电子显微镜）以及N₂吸附实验，对PAF-45-PG的结构及孔道性质进行了系统的表征.由于骨架中引入了磷酸基团，PAF-45-PG具有优良的铀离子吸附性能，在pH=6的条件下可以达到100 mg·g^-1.另外，该材料成本低廉，具有可观的工业化前景，为多孔材料在能源方面的应用提供了广阔前景.     

基于有机光电材料的痕量爆炸物识别

随着国际恐怖袭击事件的增多,痕量爆炸物的识别技术研究越来越为重要.本文以作者在该领域的研究为例,综述了基于一维有机纳米材料、荧光金属配位聚合物(金属-有机框架化合物)和聚噻咯的荧光猝灭技术,在痕量爆炸物识别上的应用.同时介绍了酞菁薄膜和苝亚酰胺纳米线制备的电子传感器分别对过氧化物和硝基类爆炸物有灵敏的响应.     

超声-气相联合扩散法快速合成ZIF-8用于硝基芳香化合物炸药的传感

三维微孔沸石咪唑基骨架(ZIF-8)纳米晶通过超声-气相联合扩散法快速合成.对该纳米晶进行荧光研究表明,纳米晶对硝基芳香化合物炸药具有良好的荧光淬灭能力.通过建立的Stern-Volmer方程,在1×10-4～8×10-4 mol/L范围内,每种炸药的浓度与纳米晶的荧光淬灭程度呈线性关系.对于2,4,6-三硝基苯酚(T...     

固态发光多孔有机聚合物的研究进展

多孔有机聚合物(Porous organic polymers,POPs)是一类新型的多孔高分子材料,通常具有骨架密度低、比表面积大、稳定性好等特性;在气体存储与分离、非均相催化、生物/化学传感等诸多方面有着巨大的应用前景。POPs材料一般具有较大的π共轭体系,将一些发色团引入聚合物骨架之中可以得到不同发光性质的多孔材料。POPs材料兼具多孔性和发光性质,在能量转换、金属离子及爆炸物检测等方面有着广泛的应用。本文通过对固态发光POPs的构筑策略以及相关应用进行概述总结,阐述了该类材料的发展和前景。     

静电纺荧光纳米纤维膜在痕量爆炸物检测中的应用

爆炸物检测作为打击爆炸恐怖主义的重要措施之一,正日益彰显出广阔的应用前景.其中,静电纺荧光纳米纤维膜在爆炸物检测领域已展现出其独特的优点,可满足爆炸物检测所需的检测速度快、检测灵敏度高等要求.本文总结了近年来静电纺荧光纳米纤维膜在爆炸物检测中的代表性成果,简要介绍了爆炸物荧光传感机理、静电纺丝技术原理、静电纺荧光纳米纤维膜的制备方法及其爆炸物检测性能的影响因素;系统、重点梳理了有机小分子体系、共轭聚合物体系、聚集诱导发光体系及其他荧光材料体系的静电纺荧光纳米纤维膜在爆炸物检测中的应用,并针对该领域尚未解决的问题和未来可能的发展方向进行了展望,可为实际爆炸物检测中静电纺荧光纳米纤维膜的设计提供指导.     

荧光传感方法检测爆炸物的研究进展

爆炸物检测是当前国际安全中迫切关注的问题之一。在过去的几十年中,大量的荧光传感材料用于荧光传感检测气态、液态和固态爆炸物见诸于报道。近年来,为了实现爆炸物的快速响应、高灵敏和高选择性的检测,研究工作者大力开发了各种新型荧光材料。这篇综述总结了近年来用于爆炸物检测的先进荧光材料,详尽、系统、重点地介绍了共轭聚合物、荧光小分子、超分子体系、具有聚集诱导发光效应的活性材料及静电纺丝纳米材料等各种荧光材料在爆炸物检测中的应用,展望了荧光传感方法在爆炸物检测领域的应用前景。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.